Model

Country

  • WARNER & SWASEY 3A #5666

    • Manufacturer: Warner & swasey

      warner & swasey 3a saddle-type turret lathe model: 3a s/n: 2168690 made in the usa read the warner swasey 3a pdf here specifications: swing over carriage:  23 1/2" maximum swing:  24 1/2" maximum distance, end of...

      No price
      Baltimore, MD, USA
    • RX-3119, WARNER & SWASEY 2A SADDLE TYPE TURRET LATHE W/ EXTRAS. M-3470.

      • Manufacturer: Warner & swasey
      • Model: 2A

        20" swing. 4-3/4" hole. 43" distance between centers. used, "as-is" model: 2a type: m-3470 power rating: 3 ph, 440 line volt, 110 control volt, 60 hz, 51.2 fl amps motor: 20/40 hp, 875/1740 rpm, 29.8/49 amp, 44...

        No price
        Willoughby, OH, USA
      • 1980 Warner & Swasey SC-20-120 Slant Bed 2843563

        • Manufacturer: Warner & swasey
        • Spindle Bore: 8.38 in 212.85 mm
        • Distance between Centers: 120.00 in 3048 mm

        two spindle speed ranges power: existing | control: siemens 840 cnc or fanuc 18itb | turret 1: 8-station | chuck type: 4-jaw independent | spindle bore: 8.38 in 212.85 mm | spindle nose: a2-15 | spindle power: 75...

        No price
        Washington, PA, USA
      • Warner & Swasey 4A

        • Manufacturer: Warner & swasey
        • Model: 4A
        • Spindle Bore: 12"
        • Distance between Centers: 60"

        cross sliding hex turret, front carriage w/ square turret rapid traverse, misc. flandged tool holders

        No price
        Smyrna, TN, USA
      • Warner & Swasey 4A

        • Manufacturer: Warner & swasey
        • Model: 4A
        • Spindle Bore: 9.25"
        • Distance between Centers: 72"

        swing: 28" | spindle bore: 9.25" | chuck diameter: 28" | number of jaws: 4 | distance between centers: 72" | swing over cross slide/carriage: 13"

        No price
        Smyrna, TN, USA
      • Warner & Swasey #4A-M-3550 5855

        • Manufacturer: Warner & swasey
        • Spindle Nose: A1 - 15

        - 24" 4 jaw chuck with 9 1/2" thru hole - lead on threading - rapid traverse - 4 way tool post - 3 flange holder on turret - coolant system - horsepower: 60

        $49,500 (USD)
        Holland, OH, USA
      • No. 2A WARNER & SWASEY, 61075

        • Manufacturer: Warner & swasey
        • Spindle Nose: 11"

        2a warner & swasey saddle-type turret lathe model: m-510, new: 1940's specifications: max swing over bed .................... 21-1/2" max. over carriage guard .............. 20" max swing over carriage horn .......

        No price
        Huntington, NY, USA
      • Warner & Swasey Mdl SC-45 4-Axis CNC Turret Lathe CATEPHHM24043

        • Manufacturer: Warner & swasey

          open time: 2 june 2017 12:00 am et / close time: 28 december 2018 05:00 pm et warner & swasey mdl sc-45 4-axis cnc turret lathe. series m7000, serial number 3100644, allen-bradley 7340 cnc controller, chip convey...

          No price
          East Peoria, IL, USA
        • Warner & Swasey Mdl SC-45 4-Axis CNC Turret Lathe CATEPHHM24042

          • Manufacturer: Warner & swasey

            open time: 2 june 2017 12:00 am et / close time: 28 december 2018 05:00 pm et warner & swasey mdl sc-45 4-axis cnc turret lathe. series m7000, serial number 3100643, chip conveyor. specifications: number of spind...

            No price
            East Peoria, IL, USA
          • Warner & Swasey 3A (M-3500) SQUARE HEAD

            • Manufacturer: Warner & swasey
            • Spindle Nose: 58-3/4"

            serial ................................. 3046551 lot 865 model .................................. 3a (m-3500) square head swing over bed ......................... 24-1/2" swing over carriage horn ............... ...

            No price
            Holland, OH, USA

          Have 5 seconds to help us improve the results?

          I'll do it
          No thanks