
Kobe Steel Pantech 100L
- Manufacturer: Kobe Steel Pantech
Capacity: 100L Design Pressure: Body F.V. ~ 1.9, Jacket 3kgf/cm²
Hiroshima, Japan
1999 Tanabe Wiltec O-24
- Manufacturer: Tanabe Wiltech
Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L
Hiroshima, Japan
2000 Tanabe Wiltech DAC-30
- Manufacturer: Tanabe Wiltech
30-inch, fully automatic, explosion-proof Rotation speed: 1,310 rpm Capacity: 45L
Hiroshima, Japan
1999 Tomoe Kogyo PTM300
- Manufacturer: Tomoe kogyo
4000 rpm/3250 rpm, approximately 3000G Four units with a 1/165 gear ratio, one unit with a 1/125 gear ratio Backdrive specification (can be modified to single-motor) 1999, 2000, 2004 (two units), and 2007 models ...
Hiroshima, Japan
Hammer mill (swing)
400V specification explosion proof type Purchasing area: 60Hz | Material: SS | Quantity saved: 1
Hiroshima, Japan
Makino F-101
- Manufacturer: Makino
Specifications:Fully automatic type converted to semi-automatic Filtration area: 14.5m2 Filtration volume: 200L Filtration plate dimensions: 650 x 650 x 18 chambers Filtration plate material: PP
Hiroshima, Japan![[TANABE WILTECH] Basket type centrifuge](https://i.machinio.com/thumb/96vas/3472928458/ddf6/tanabe-wiltech-basket-type-centrifuge-55inch.jpg)
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: Tanabe Wiltech
Manual scraping device. Bottom discharge type. Main motor pole change specification, 13Kw-26Kw 200V, explosion proof
Hiroshima, Japan
1991 Mitsubishi Kakoki SJ-30T
- Manufacturer: Mitsubishi
1 set of new spare parts available Disassembly tool is available
Hiroshima, Japan
Hiroshima, Japan
Tanabe AT-48
- Manufacturer: Tanabe
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
2007 IHI IX-36T
- Manufacturer: IHI
Rotation speed 3150 rpm (centrifugal effect 2000G) Gearbox GT-2X (1/88) With soundproofing box Gross weight of main body 2300kg
Hiroshima, Japan
2007 Sekko Sangyo SSR150
- Manufacturer: Seikou Sangyo
18.6m3/min, 55kpa Power: 30kw | Purchasing area: 60Hz | Quantity saved: 3 units
Hiroshima, Japan
Tokuju V-150
- Manufacturer: Deoksary
Total capacity: 335L Stocking capacity: 150L Power: 1.5kw | Purchasing area: 50 Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Hiroshima, Japan
3300L Cylindrical vertical
Main unit SUS Jacket SS Distiller Material: SUS · SS | Quantity saved: One
Hiroshima, Japan

