Used Forging

Trusted Seller
Cross Wedge Roll ULS55
- Manufacturer: Šmeral Brno
- Model: ULS 55
Diameter of work piece : max. 55 mm, Diameter of roll segment : max. 600 mm, Width of roll : 500 mm, Roll revolutions : 8 - 16 min^-1, Roll adjustment : 25 mm, Driving power : 55 kW, Dimensions : 3000 x 240...
Europe
Trusted Seller
Part Former Cold Hatebur BKA4
- Manufacturer: Hatebur
Working posts : 4, Press capacity : 350 ToF, Maximum wire dia : 25 mm, Cutoff length : 100 mm, Max. piece diameter : 23 mm, Speed of crankshaft : 65 rpm, Max. length under head : 160 mm, Pieces/Minute max....
Europe
Trusted Seller
Billet Shear 160
- Manufacturer: Ficep
Press capacity : 800 tons, Max diameter of bar : 45-160 mm, Side for square section : 140 mm, Maximum length of the cut piece : 750 mm, Stroke/min : 15, Stroke of ram : 110 mm, Speed flywheel : 300 rpm, Ma...
Europe
Trusted Seller
Spares Huta Zygmunt, Polish MPM5000
- Manufacturer: Huta Zygmunt, Polish
Original Huta Zygmunt spare parts of MPM5000 (17,500 kgm) Capacity : 6 tons, 4.1 Cylinder, used : 18,500 Euro 4.2 Left column, used : 15,800 Euro 4.3 Right column, used : 15,800 Euro 4.4 Ram with 3 segment c...
Europe
Trusted Seller
Spares TMP Voronezh Russia
- Manufacturer: Voronezh
6300/8000 tons Press - Clutch. (Intermediate Clutch Disc) Qty : 2 Nos.
Europe
Trusted Seller
Spares TMP Voronezh Russia
- Manufacturer: Voronezh
6300 tons Press - Cooled Brake Item condition: Good condition | Capacity tons: 6300
Europe
Trusted Seller
Spares TMP Voronezh Russia
- Manufacturer: Voronezh
6300 tons Press - Clutch (Lining Clutch Disc) Qty : 2 Nos.
Europe
Trusted Seller
Header Progressive Bolt Maker National M34S1
- Manufacturer: National
Double blow header Diameter range : 4 mm, Shaft length under head : 25 mm, Max. cutting length : 32 mm, Output- piece/min : 350, Weight : 1570 kg, Motor power : 4 kW, Measurements : 200 x 80 x 160 mm.
Europe
Trusted Seller
Header Progressive Bolt Makers BM20
- Manufacturer: National
Diameter range: 24 mm, Number of dies: 4, Max. Punch k.o. Stroke 30 mm Min/max. Cutoff of length : 50/200 mm, Die k.o. Stroke : 30/155 mm, Max thread length : 75 mm, Min. Bolt with thread m-16 x 50 din 933,...
Europe
Trusted Seller
1 ton Manipulator DDS AMP1000
- Manufacturer: DDS
Auto Schmiede Manipulator : Capacity : 1 ton, Driving power : 22 kW, Load moment : 2 m, Max. workpiece diameter : 460 mm, Min. workpiece diameter : 110 mm, Pince rotation : 30/min, Pince height : 550 mm, ...
Europe
Trusted Seller
3 inch Upsetter Ajax
- Manufacturer: Ajax
3" Capacity : 600 tons, Item condition: Good working condition | Capacity tons: 600
Europe
Trusted Seller
13 tons Manipulator Dango & Dienenthal S260H
- Manufacturer: Dango & Dienenthal
Capacity : 13 tons, 13 tons nominal capacity (real 15 ton), Weight : 65 tons. Manual and drawing available. Very good mechanical and hydraulic condition but the electrical parts need revamping. The documenta...
Europe
Trusted Seller
3 tons Manipulator Dango & Dienenthal
- Manufacturer: Dango & Dienenthal
Capacity : 3 tons, 3000 kg. Item condition: Good condition | Capacity tons: 3
Europe
Trusted Seller
Spares Huta Zygmunt, Polish MPM2000A
- Manufacturer: Huta Zygmunt, Polish
Original Huta Zygmunt spare parts of MPM 2000A (7000 kgm) Capacity : 2.5 tons, 2.1 Ram with 3 segment channels with clamping ring, little used : 18,500 Euro 2.2 Ram with 3 segment channels, little used : 18,50...
Europe
Trusted Seller
Spares Huta Zygmunt, Polish MPM1000A
- Manufacturer: Huta Zygmunt, Polish
Original Huta Zygmunt spare parts of MPM1000A (3600 kgm) Capacity : 1 ton 1.1 Left column, new: 15,000 Euro 1.2 Right column, new: 15,000 Euro 1.3 Cylinder assembly, Set – new : 29,000 Euro 1.4 Cylinder line...
Europe