Used Processing in Opole, Poland

Ash conveyor, waste removal from the Ż 34 furnace

Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW

Kohlbach biomass stove 400 KW heating power 29

Furnace with 400 KW heating power TYPE K 8 - 400 Furnaces for biomass, bark, woodchip, sawdust. Fuel feeder Heat exchanger from 2009

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Moving floors, scraper conveyors for furnaces

Single, double or triple scraper floors. We have pulling as well as pushing scrapers, depending on your needs. Scrapers range in length from 4 m to 7.50 m, width from 1.60 m to 2.10 m

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Gas furnace (natural gas) 4 MW

TYPE LLR 4000 4 MW furnace Year 1999 Maximum flow temperature 120°C, maximum pressure 6 bar Used very little, only for cleaning the two adjacent biomass furnaces The furnace is in very good condition, as shown in...

Urbas biomass furnace, rated power 5 MW, typed at 3.5 MW

Year 2002 Water temperature: 110 degrees Celsius, pressure: 6 bar Power: 5.0 MW, rated at 3.5 MW due to regulations and the lack of an electrostatic precipitator Delivery: late April – May 2026

Furnace for drying sawdust and wood chips

Cells

Cells (2 pcs.) Inlet 27 x 14 cm Engine 1.2/0.81 KW

Tank, expansion tank made of acid-resistant sheet metal

Height: 3 m Diameter: 2 m Total height: 4.20 m Tank as shown in the photos

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Conveyor belt, driven, in bevel TA 259

Length 8.00 m Width of the tape 50 cm Total width 90 cm Belt conveyor in a slant, rising to about 3.00 m

Furnace, sawdust boiler with a stoker

Furnace with heating power of 600 KW Low-temperature furnace, automatic system for burning biomass Type INNOVEX - BOREX - AT Date of production 2006 Technical and operation documentation Nolting scraper The whole...

Tank for compressor 500 l

Tank with a capacity of 500 l Pressure 16 bar Year 2002 - height 200 cm - diameter 60 cm