Used threading

Trusted Seller
4294
- used
- Manufacturer: Landis
Landis Threading Chaser Holders, # unknown, 1-1/4 Degree
$25 USD
York, PA
Trusted Seller
4297
- used
- Manufacturer: Landis
Landis Threading Chaser Holders, # B3535, 7/16 to 5/8 UNC Left Hand
$60 USD
York, PA
Trusted Seller
4288
- used
- Manufacturer: Landis
Landis Threading Chaser Holders, # Unknown, 3/16 to 3/8 NC
$50 USD
York, PA
Trusted Seller
4295
- used
- Manufacturer: Landis
Landis Threading Chaser Holders, # B3310, 7/16 to 5/8 UNC
$20 USD
York, PA
Trusted Seller
4292
- used
- Manufacturer: Landis
Landis Threading Chaser Holders, # B3406, 7/16 to 5/8 UNC & 1/4 Pipe
$20 USD
York, PA
Trusted Seller
1990 WARREN INDUSTRIES WT-1500
- used
- Manufacturer: Warren
- Model: WT-1500
Die requirement: "0" or "1015" | Screw diameter capacity: #2 thru #12 (1/4") | Speed range: 90 to 700 PPM | Maximum blank length: Up to 3" | Die pocket depth: 3" | Approx. weight: 4,500 lbs | Approx. floor size:...
Ivyland, PA
Trusted Seller
1980 KINEFAC MC-5-F
- used
- Manufacturer: KINEFAC
Maximum infeed diameter: 2" | Spindle diameter: 2" | Maximum diameter thru feed: 1-1/2" | Die length: 4" | Electrics: AC Motor and Controls | Approx. weight: 3,000 lbs | Equipped with: Hydraulic Pump and TankCoo...
Ivyland, PA
Trusted Seller
1986 TESKER 30
- used
- Manufacturer: TESKER
Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...
Ivyland, PA
Trusted Seller
1990 TESKER 30
- used
- Manufacturer: TESKER
Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...
Ivyland, PA
Trusted Seller
1970 PELTZER & EHLERS NKW-16
- used
- Manufacturer: Peltzer & Ehlers
Electrics: 440 V | Equipped with: The machine has a #40 Stroke with 3" Deep Die PocketWith all original paperwork, operating manual and schematics
Ivyland, PA
Trusted Seller
1981 WARREN INDUSTRIES WT-1000
- used
- Manufacturer: Warren
- Model: WT-1000
Die requirement: "0" or "00" | Production: up to 1000 PPM | Screw diameter capacity: #2 to #12 | Blank length maximum: Up to 3" | Approx. weight: 4,500 lbs | Equipped with: With Vibratory Bowl
Ivyland, PA
Trusted Seller
4293
- used
- Manufacturer: Landis
- Model: 4293
Landis Threading Chaser Holders, # B3406, 7/16 to 5/8 NF, 1 piece has a broken screw
$75 USD
York, PA
Trusted Seller
4298
- used
- Manufacturer: Landis
Landis Threading Chaser Holders, # CA3549, 3/16 to 3/8 UNC Left Hand, 3 pieces without screws and clamps
$30 USD
York, PA
Trusted Seller
1997 KYOEI SR-15
- used
- Manufacturer: KYOEI
Production: 400 PPM | Maximum depth of die face: 2.125" - 2.362" | Thickness of dies: .811" (20.6mm) | Length of moving die: 4" (101.6mm) | Length of stationary die: 3.5" (88.9mm) | Motor: 5 HP | Approx. floor s...
Ivyland, PA
Trusted Seller
4299
- used
- Manufacturer: Landis
Landis Threading Chaser Holders, # B90188, 6-3/4 Degree, 3/8" dia, 1/16P-1/8 LD, Left Hand, 3 pieces without screws and clamps
$30 USD
York, PA
National M20 Threading & Tapping
- used
- Manufacturer: National
- Model: M20
Good condition National M20 Threading & Tappings manufactured in 1983. Located in Canada and other countries. Click request price for more information.
Canada