Used Mineral Processing

Denver-Style DR Flotation Cell Parts Kits

New manufacture parts kits for Denver-Style DR flotation cells - Parts are interchangeable with original Denver DR cells or D'Angelo's DR-style cells - Standard wear part material is 520 natural black rubber - Ru...

Denver DR 24 Impellor and Diffuser Rubber Parts

- Lot of 10 Units: Denver DR 24 Impellers and Diffusers - Impellers: Natural rubber, bolt on type, 9 vane - Diffusers:  Natural rubber, 16 fins, 6” deep - Year of manufacture: 2013 - Condition: Unused surplus

Hydraulic Grinding Mill Inching Drive

Hydraulic Grinding Mill Inching Drive Mechanically connects to the non-drive end of the primary pinion A flanged hub on the output shaft of the reduction unit slides over to bolt to the existing hub on the pinion...

30 x 7 ft (9.1 x 2.1 m) Allis Chalmers ( Metso) SAG Mill components with 4079 HP motor, 200 RPM

• Manufacturer: Allis-Chalmers

Allis Chalmers 30 x 7 ft SAG - Westinghouse AC brushless synchronous motor with spare stator: - 4079 HP (3000 kW) - 200 RPM - 3300 V - 50 Hz Mill includes: - Bull gear - Pinions - Lube units - Slide shoe bearings...

Steel grinding balls

- Used steel grinding balls - 3 inch minus, majority are 1.5-2.5 inches - Cleaned and stored in barrels - Ready for shipment - Large quantity available

Eaton 38 VC 1200 Air clutch

• Manufacturer: Eaton

Complete new and unused Eaton airflex clutch 1- 38VC1200 Element ASSY 2 SC 1- I.O.M Manual 1 1 - 38VC1200 Drive hub 1 - 38VC1200 Male reg drum 2 - Hose assembly 1 - 38VC1200 Spider Inquire about other Eaton clutc...

Mill, Sag, 38' X 25'5", Metso, 26,000 HP, Unused #D739652

• Manufacturer: Metso

Unused Metso grate discharge sag mill trommel with replacement panels, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,000 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 60 Hz. EGL: 22' (6.7...

METSO OUTOTEC e200

• Manufacturer: Metso

Tank Size: LOT of 6 UNUSED METSO OUTOTEC Forced Air TankCell e200 Flotation Cells Forced Air 200m3 Flotation Cells 7,049 ft3 (6) Motors, 250 HP (185 kW) Rotor FloatForce 1500 Stator Wear Parts FloatForce 1500 Gea...

UNUSED AIR LIQUIDE 29,180 NM3/Hr (1,000 TPD) ASU-Oxygen Plant

UNUSED AIR LIQUIDE 29,180 NM3/Hr (1,000 TPD) ASU-Oxygen Plant Air Compressor Equipment Air Purification Equipment Low Temperature Equipment Cold Box Equipment Product Storage & Backup Piping and Valves Instrument...

DENVER 5033

• Manufacturer: Denver

Spare parts for 50FT DENVER SUB-A CF24 flotation cell Gilled diffuser for CF24 50FT mechanism DENVER SUB-A PCV New

DENVER 5010

• Manufacturer: Denver

Spare parts for 50FT CF24 flotation cell DENVER SUB-A type Closed agitator for CF24 50FT DENVER SUB-A mechanism with 2 15/26" mounting PCV New

DENVER 5004

• Manufacturer: Denver

Spare parts for CF18 Y 18 special flotation cells DENVER SUB-A Diffuser for CF18 Y 18 special SUB-A mechanism PCV New

UNUSED FLSMIDTH 18' dia x 16' L SAG Mill, 2,300 kW (3084 HP)

• Manufacturer: FLSmidth

UNUSED FLSMIDTH 18' dia x 16' L SAG Mill, 2,300 kW (3084 HP) 18' dia x 14.5' (5.486m x 4.42m) EGL Wet Grinding Shell Length 4878mm Flange to Flange Feed Size 110mm ABB 2,300 kW (3,084 HP) Motor Steel Liners Pleas...

DENVER 5086

• Manufacturer: Denver

Spare parts for CF18 Y 18 flotation cells DENVER SUB-A type Agitator for CF18 Y 18 SP SUB-A mechanism PCV New

UNUSED FLSMIDTH 18' dia. x 11.5' L SAG Mill, 2300 kW (3084 HP)

• Manufacturer: FLSmidth

UNUSED FLSMIDTH 18' dia. x 11.5' L SAG Mill, 2300 kW (3084 HP) 18' dia x 10' (5.486m x 3.048m)EGL ABB 2,300 kW (3,084 HP) Motor Please accept cookies to access this content