Carmel Hamlet, NY- Trusted Seller
Athena Nitrogen Evaporator & Concentrator AT-EV-50
- Manufacturer: Athena
Includes: Nitrogen Evaporator & Concentrator Sample Capacity: 50 Rack Type: 15mm x 150mm Electrical Plug: 220V Warranty Coverage Options: Installation & Familiarization Alternative Rack Type Options Financing Ava...
Arcade, NY 
Admix DynaShear DS850 Inline High Shear Mixer
- Manufacturer: Admix
Model: DS850 One pre owned Admix DynaShear High Shear Inline Mixer. Maximum Flow Rate is 350 Gallons per minute. 6 Inch Diameter Inlet, 4 Inch Diameter Outlet. Driven by a 40 Hp, 460 Volt, 3 Phase, 60 Hz Motor. ...
Carmel Hamlet, NY
Graco D200 C36 Drum pump
- Manufacturer: Graco
Model: D200 C36 One pre owned Graco D200 C36 Drum Pump. This is a plunger type Drum Unloader. Unit is for 55 Gallon Drums. Comes with NXT Air Motor, A Series, Max Flow Ratio 36:1, Max Air WPR 0.7 Mpa, 7 Bar, 100...
Carmel Hamlet, NY
Lightnin Mixer
- Manufacturer: Lightnin
Model: XJO-43AM One pre owned Lightnin Mixer. Driven by a .43 Hp, 50/60 Hz, 3 Phase, 208-220/440 Volt Motor. As shown in photos.
Carmel Hamlet, NY
Tek-Temp Air Cooled Chillers
Model: 200/15K/C150/DSS/FM One pre owned Tek-Temp 15,000 BTU Air Cooled Chiller. R404 Refrigerant (64oz). 208/230 Volt, 3 Phase, 14 Amp, 60 Hz.
Carmel Hamlet, NY
Tek-Temp Air Cooled Chillers
Model: 200/15K/C150/BP2 One pre owned Tek-Temp 15,000 BTU Air Cooled Chiller. R404 Refrigerant (64oz). 208/230 Volt, 3 Phase, 14 Amp, 60 Hz.
Carmel Hamlet, NY- Trusted Seller
TLM model Prime 600 Vertical Pouch Machine Hand fed (NEW)
- Manufacturer: TLM
TLM model Prime 600 Vertical Pouch Machine Hand fed (NEW) - Serial#1631 built 2020 - 1 phase, 60 cycle, 220 volts, 3 kw, 3 BAR compressed air - Speed: 20 ppm Max (depending on product and size) - Film width max: ...
Buffalo, NY - Trusted Seller
TLM model Prime 600 Vertical Pouch Machine Hand fed (NEW)
- Manufacturer: TLM
TLM model Prime 600 Vertical Pouch Machine Hand fed (NEW) - Serial#1869 built 2022 - 1 phase, 60 cycle, 220 volts, 3 kw, 3 BAR compressed air - Speed: 20 ppm Max (depending on product and size) - Max bag width = ...
Buffalo, NY - Trusted Seller
3M Top and Bottom Case Taper
- Manufacturer: 3M
3M Top and Bottom Case Taper - Model A70 type 10700, Serial#50555 built 2009 - Bottom belts - Casters - 115 volts - Up to 30 cases/minute - Length: 6" to no limit - Width: 6" to 21.5" - Height: 4.75" to 21.5" - W...
Buffalo, NY - Trusted Seller
Parker NitroFlow 60 NA Nitrogen Generator
- Manufacturer: Parker Balston/Whatman
Includes: Parker NitroFlow 60 NA Nitrogen Generator Compatible with Agilent 6490, 6495, 65XX QTOF Systems Warranty Coverage Options: LC Workstation MS Workstation GC/MS Workstation Financing Available The Parker ...
Arcade, NY - Trusted Seller
LabTech Recirculating Water Chiller H150-1000
- Manufacturer: BMG - Labtech
- Model: H150-1000
Includes: LabTech H150-1000 Recirculating Water Chiller Temperature Range: 8 – 35 Temperature Stability: ±0,1 Temperature Control Mode: PID Cooling Capacity: 1000 Watt Pump: Flux-6 l/min at 60 psi, Power-135 Watt...
Arcade, NY - Trusted Seller
TLM model Prime 600 Vertical Pouch Machine Hand fed (NEW)
- Manufacturer: TLM
TLM model Prime 600 Vertical Pouch Machine Hand fed (NEW) - Serial#1985 built 2022 - 1 phase, 60 cycle, 220 volts, 3 kw, 3 BAR compressed air - Speed: 20 ppm Max (depending on product and size) - Max bag width = ...
Buffalo, NY - Trusted Seller
3M Top and Bottom Case Taper
- Manufacturer: 3M
3M Top and Bottom Case Taper - Model A70 type 10700, Serial#50127 built 2011 - Bottom belts - Casters - 115 volts - Up to 30 cases/minute - Length: 6" to no limit - Width: 6" to 21.5" - Height: 4.75" to 21.5" - W...
Buffalo, NY - Trusted Seller
3M Top and Bottom Case Taper
- Manufacturer: 3M
3M Top and Bottom Case Taper - Model A70 type 10700, Serial#50059 built 2009 - Bottom belts - Casters - 115 volts - Up to 30 cases/minute - Length: 6" to no limit - Width: 6" to 21.5" - Height: 4.75" to 21.5" - W...
Buffalo, NY 
Stephan VCM Agitators, Blenders, Mixer
- Manufacturer: Stephan
- Model: VCM
Good condition Stephan VCM Agitators, Blenders, Mixers manufactured in 2022. Located in Canada and other countries. Click request price for more information.
Canada
Tip: Enter manufacturer, model or keyword