Used Agitators in Germany

700 liter agitator tank, Aisi 304 with propeller agitator

• used

remarks: Outlet fitting lower than the foot ends (take this into account when setting up); 1 screwed lid segment at the top edge (the rest is open); see photos

65 liter agitator tank, Aisi 316 with propeller agitator

• used

Volume: 65 liter | Lower bottom: flat bottom | Upper bottom: open | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 430 mm | Cylindrical height: 480 mm | Total height: 1.120 mm | Outlet: 32 mm | Rem...

BLACK stainless steel agitator tank - with approx. 700 liter capacity

• used

• Manufacturer: Schwarz

THOUET agitator tank - type RW-3000, with a capacity of approx. 3,000 kg.

• used

• Manufacturer: Thouet

The tank is double-walled for heating in mild steel. The hot water is provided by the installed screw-in heaters. Useful capacity: approx. 3,000 kg

6500 liter agitator tank, Aisi 304 with 2 propeller agitators

• used

max. allowable working temperature: 90 °C remarks: Cone height approx. 1300 mm; Manhole approx. 415 x 500 mm; 1 rectangular opening approx. 350 x 440 mm without cover in the upper bottom; in 1 tank 1 small crack ...

630 liter insulated agitator tank, Aisi 304 with propeller agitator

• used

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

• used

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• used

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

15000 liter insulated agitator tank, Aisi 304 with propeller agitator

• used

remarks: Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen

630 liter insulated agitator tank, Aisi 304 with propeller agitator

• used

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

67000 liter agitator tank, Aisi 316 with inclined blade agitator

• used

• Manufacturer: BERTSCH

max. allowable working temperature: 100 °C remarks: Manhole cylinder NW 600; total height might deviate slightly (measures taken from drawing)

5000 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• used

• Manufacturer: Diessel

Temperature control cylinder (dj): half-coil temperature control bottom (dj): thermoplate notice: bump at the insulation jacket, scratches inside, Functionality of the double jacket not checked remarks: Sheet met...

2210 liter insulated agitator tank, Aisi 304 with blades agitator

• used

• Manufacturer: Rieger

max. allowable working temperature: 90 °C remarks: 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel ...

Agitator tank 0.9 cbm, insulated, double jacket

• used

• Manufacturer: Sielmann

Content: 0.9 cubic meters | Material: stainless steel | Material specification: 1.4401/1.4404 | I. diameter: 1100 mm | Diameter: 1274 mm | Cyl. height: 750 mm | Height agitator: 900 mm | Upper floor: 233 mm | Lo...

5000 liter insulated agitator tank, Aisi 316 with 3 agitators

• used

remarks: 1 dent in the inner tank (overpressure of the no longer functional heating jacket; see photos); insulation jacket with smaller dents and partially detached plates; tank with adhesions inside; Devices for...