Used Processing in Ontario, Canada

54 Litres stainless tank on cart

• Manufacturer: Robroy Industries

-Shipping dimensions: length 57" x width 28" x height 82" -Tank dimensions: diameter 12" x height 30" -Stainless steel cart -Stainless vessel with removable lid -Max allowable workable pressure:100 PSI at 300 deg...

32,136 Litres Stainless Steel Tank

-Supported with 4 legs -Dome bottom -Flat top -304 stainless steel -7069 IMP Gallons -Tank is 232" tall with the legs 273" tall

50,006 liters Insulated stainless steel tank

-Flat bottom -Dome top -Flange on side is 1.5" -Tank Dimensions: 200" tall x 145" diameter Shipping dimensions with it laying down: -Length: 20.2 ft -Height: 10.5 ft -Approximate weight: 8,500 pounds

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping Dimensions: 12" length x 12" width x 12" height -Input/output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

16,365 Liter Proceptor Double Tank Oil/Water Separation System

-Separates oil/grease from water (2) 3600 IG FRP tanks -10' dia x 9 1/2' straight side -12' overall height -7' 2" internal straight side -Skirted bottom, internal dish -Center drain to side discharge (6") -2' dom...

590 Liter Mixing Tank

- Nord mixer on top: 2791 ratio, 63 speed - Nord motor: 1765-145 RPM, 230/460V, 5HP - Diameter is 34" -height is 40" -130 IMP - Overall height 81" -4 legs are 23" - Stainless steel - Chemical use - Dome bottom

Industrial bag filter from York fluid controls

-Shipping: length 16" x width 15" x height 37" -Flange diameter: 7 1/2" x 6" bottom

Chicago Pneumatic CPX 20 refrigerated air dryer

• Manufacturer: Chicago Pneumatic
• Model: CPX20

-Shipping dimensions: Height 33" x Width 18 1/2" x Length 26" -1 Phase -Voltage 115 (230) -Frequency (Hz) 60 -Working pressure: 16 bar -Max pressure: 16 bar -Refrigerant type: R513A -Max inlet temp: 55 C -Max amb...

940 Litres stationary tank

-Open top with lid -Stationary with fork lift accessible flat bottom -Diameter is 32.5" -Height is 47.5" -207 IMP

Lightnin Mixer

• Manufacturer: Lightnin

Model:N33G-33, HP:1/3, Volt:115, Phase:1, RPM:1725,

922 Liter Horizontal Tank

• Manufacturer: Sharpsville Container

-203 IG -MAWP 100 psi @250 F -MDMT -20 F @ 100 psi -9" from the ground to the bottom -64" tall -Certified by Sharpsville container

5 HP Scott Hammer Mill

-Shipping dimensions: length 49" x width 40" x height 30" -Model: Sh18-12 -5 HP -208-230/460 Volts -15-23.2/6.6 AMPS -1725 RPM -3 phase

1,000 Litres Stainless steel tank with heating coil

-Cone bottom with a 2" Drain -Heating coil in the middle of the tank -4 Stationary legs of tank are 22" tall -Tank dimensions: 36" diameter x 60" tall -Shipping: Height 95" x Width 45" x Length 45" -Man whole on ...

909 Liter Stainless steel tank with dome bottom

-4 stationary legs that are 30" tall -Dome bottom with a 3" drain on bottom -1" valve on the side at the bottom -Manhole on top -Tank dimensions: 35" diameter x 58" tall -200 IMP Gallon

Gandus Saldatrici Tb - 3 Grease line heat Sealer

• Manufacturer: Gandus

-Shipping dimensions: Height - 20" x Width - 29" x Length - 16" -115 V -50/60Hz -Comes with case