Used Machine Tools in Aichi, Japan

EROWA Tools/ Tools/Manual Clamp Chuck with Block
- Manufacturer: Erowa
Chuck outer diameter: Φ80 mm,. Block dimensions: 80 x 80 x 80 mm In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
Trusco Nakayama / Cabinets, Workbenches / Tool Racks
- Manufacturer: Trasco Nakayama
For BT50,. Holders: 40 pcs. Dimensions: (Width)750(Depth)620(Height)1500mm Number of sections: 8 In case of any discrepancy between the description and the actual product, the actual product shall take precedence.
Toyohashi, Japan
JAM/Japan Automatic Machine AP100
- Manufacturer: JAM/Japan
Material: SKS,. Hardness: HRC60°,. Dimensions: (D)90*(W)90*(H)100㎜,,, Weight: 2.4kg Weight: 2.4kg In case of any discrepancy between the description and the actual product, the actual product shall take priority.
Toyohashi, Japan
2012 Sugino machine JCC-W6650E
- Manufacturer: Sugino
FANUC 0i-MD,. Max. cleaning pressure: 50MPa, Discharge flow rate: 18L/min. Discharge flow rate: 18L/min. S:X650*Y500*Z500, Number of nozzles: 4 No. of nozzles: 4 In case of any discrepancy between the description...
Toyohashi, Japan
JAM/Japan Automatic Machine TDP150
- Manufacturer: JAM/Japan
Width of the clip: 120 mm, Width of the clip opening: 150 mm, Width of the clip opening: 150 mm Opening width: 150mm, Tilt: 45°, Tilt: 45°, Tilt: 45°, Tilt: 45°, Tilt: 45 Tilt: 45°, Swivel: 360 Swivel: 360°, Tilt...
Toyohashi, Japan
Takeda Machine TK-100HVI
- Manufacturer: Takeda
Width: 104 mm, Height: 36 mm, Mouthpiece height: 36 mm, Mouthpiece width: 104 mm Height of the mouthpiece: 36 mm,, Maximum opening width of the mouthpiece: 0 to 170 mm Max. opening width: 0 to 170 mm, Max. angle:...
Toyohashi, Japan
2018 Okamoto Machine Tool PSG65SA1
- Manufacturer: Okamoto
- Model: PSG-65
Table work surface size(L*W):610*500mm,. Table travel (left/right*forward/backward):750*540mm Distance from table top to wheel bottom: 22.5-522.5mm Chuck dimensions: 600*500*100mm, Allowable workpiece weight (inc...
Toyohashi, Japan
1996 Okamoto Machine Tool PFG-525
- Manufacturer: Okamoto
- Model: PFG-525
T:480*200mm,. Sine bar chuck, (OD)φ180-205*(W)10-20*(ID)φ31.75mm Grinding wheel: (OD)φ180-205*(W)10-20*(ID)φ31.75mm, All manual In case of any discrepancy between the description and the actual product, the actua...
Toyohashi, Japan
2012 Okamoto Machine Tool PFG-500II
- Manufacturer: Okamoto
- Model: PFG-500
T:600*140mm,. Table travel: (left/right)540*(front/back)180mm, Grinding wheel: (OD)φ160*(W)6-32*(I.D.φ31.75) All manual In case of any discrepancy between the description and the actual product, the actual produc...
Toyohashi, Japan
2007 Okamoto Machine Tool Works IGM-15NC
- Manufacturer: Okamoto
- Model: IGM-15NC
FANUC-18iTB, Grinding hole diameter: 6 to 150 mm dia. Grinding length: 125mm, Swing over table:φ600mm, Swing inside chuck cover:ø260mm, S:X170*Z500mm, Grinding wheel axis ~850rpm, 3-jaw chuck (GAMET 315MAC), Wate...
Toyohashi, Japan
1991 Takara Kikai Kogyo TK70
- Manufacturer: Takara Machine Industry
T:550*700mm,. Table travel(back/forth):290mm, Max. workpiece height:200mm, Min. workpiece inside diameter:8mm Min. internal diameter of workpiece:8mm, Processing key width:3~25mm If there is any discrepancy betwe...
Toyohashi, Japan
2018 Nihon Tokushu Kogyo NCR-1200NS
- Manufacturer: Japan Specialty Industry
Milling diameter: φ16-80mm (with 4-inch cutter), Milling length: 100-1200mm, Milling cutter diameter: 4 inches, Automatic door *If there are any discrepancies between the product description and the actual produc...
Toyohashi, Japan
Nippon Automatic / JAM CC02 type
- Manufacturer: Japan Automatic / JAM
Power supply: AC100V 50/60㎐, Rotation speed (50/60Hz): 3,000/3,600rpm In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
Nippon Automatic / JAM CC02 type
- Manufacturer: Nippon Automatic
Power supply: AC100V 50/60㎐, Rotation speed (50/60㎐): 2,810/3,380 In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
1980 Yamage MY-200D
- Manufacturer: Hillock
Max. ram stroke: 205mm, 22 to 91rpm, T:φ427mm, Table travel: (back/forth)435*(left/right)600mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan