Used Electrical Test Instruments in Gauteng, South Africa

Grandway FHP3P05 | 10G PON Power Meter

• new

Items: Specifications | Wavelength: 1270nm(burst) | Test range(dbm): 10～-40 | Spectral passband(nm): 1310±50 | Isolation: 1577nm＞40dB | Insertion loss: ≤1.5dB | Uncertainty: ≤0.5dB | Resolution: 0.01dB | Threshol...

TBMR-110M EMI-ANALYZER DC-110 MHZ

• new

• Manufacturer: EMI

International EMC Standards require various spectrum measurement methods and equipment to ensure that the EUT´s electromagnetic emissions do not exceed the specified limits. The TBMR-110M EMI Analyzer is designed...

TESCA Synchronization Panel Trainer

• new

46622 in industry loads are directly connected to the source through an isolation switch. But when the load demand is increased and the source capacity is less, another source is connected in parallel so that bot...

Dummy Load (-105dBc) Connector: N-F

• new

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-F

Dummy Load (-105dBc) Connector: DIN-M

• new

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: DIN-M

Chauvin Arnoux CA745, LED Voltage Indicator, 690V ac/dc, Continuity Check, Mains Powered, CAT III 600 V

• new

• Manufacturer: Chauvin Arnoux

Maximum voltage: 690V ac/dc | Continuity check: Yes | Safety category: CAT III 600 V | Display type: LED | Power source: Mains | Dimensions: 47 x 36 x 193mm | Weight: 170g | Height: 193mm | Length: 47mm | Maximu...

Chauvin Arnoux CA6608 Phase Rotation Tester

• new

• Manufacturer: Chauvin Arnoux

ShinewayTech OPM-50 Intelligent Optical Power Meter

• new

OPM-50 Seires paired with SLS-50 Seires Intelligent Stabilized Laser Source can be used to identify fiber, measure attenuation and loss, verify continuity and evaluate fiber link transmission quality. ●Automatic ...

TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2

• new

• Manufacturer: LiSN

The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...

Probe for 3 kHz to 100 MHz

• new

The TBCCP1-3K100 is a coaxial RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat ...

Coupling Decoupling Network M1

• new

The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2

• new

• Manufacturer: LiSN

The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...

TBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2

• new

• Manufacturer: LiSN

The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...

Ceyear 2438CA/CB/PA/PB Microwave Power Meter

• new

2438 series microwave power meter consists of microwave power meter host and a series of microwave power sensors. With the new design of broadband diode detector, digital signal processing technology and multidim...

Deviser EP310 Series PON Power Meter

• new

The EP310 is a passive optical network (PON) power meter that enables users to quickly validate PON network installations. It measures 3 wavelengths (1310/1490/1550 nm) at once, with user-defined limits and USB d...