Used Agilent - Keysight Network Analyzers

Trusted Seller
Keysight (Agilent) 85033A
- Manufacturer: Agilent - Keysight
- Model: 85033A
SMA Calibration kit, 50 ohm The 85033A SMA Calibration Kit provides two SMA male to APC-7 adapters, two SMA female to APC-7 adapters, as well as one each SMA male and female short circuits and 50-ohm (<1.06 SWR a...
Cary, NC
Trusted Seller
Keysight (Agilent) 85020A
- Manufacturer: Agilent - Keysight
- Model: 85020A
RF directional bridge, 50 ohm, Type N The economical HP 85020A/B directional bridges also offer high (40 dB) directivity and excellent performance at RF (to 4.3 GHz) frequencies. For 50 ohm measurements choose th...
Cary, NC
Trusted Seller
Keysight (Agilent) 35677A
- Manufacturer: Agilent - Keysight
- Model: 35677A
50 ohm S-Parameter Test Set The 35677A S-Parameter Test Set contains the hardware required to make transmission and reflection measurements in both the forward and reverse directions. The only setup required is t...
Cary, NC
Trusted Seller
Keysight (Agilent) 85056K
- Manufacturer: Agilent - Keysight
- Model: 85056
Mechanical Calibration Kit, DC to 50 GHz, 2.4 mm & 2.92 mm The Agilent 85056K mechanical calibration kit contains 2.4 mm precision standard devices to characterize the systematic errors of Agilent network analyze...
Cary, NC
Trusted Seller
Keysight (Agilent) 8720B
- Manufacturer: Agilent - Keysight
- Model: 8720B
RF Vector Network Analyzer, 130MHz-20GHz The 8720B Microwave Network Analyzer can characterize microwave components and networks from 130MHz up to 20GHz. This vector network analyzer includes a fast-sweeping synt...
Cary, NC
Trusted Seller
HP Agilent Keysight 85037B
- Manufacturer: Agilent - Keysight
- Model: 85037B
HP Agilent Keysight 85037B Precision Detector 26.5 GHz
Cary, NC
Trusted Seller
HP Agilent Keysight 85050-60006
- Manufacturer: Agilent - Keysight
- Model: 85050
HP Agilent Keysight 85050-60006 Precision Termination APC-7mm
Cary, NC
Trusted Seller
Keysight (Agilent) U1818A
- Manufacturer: Agilent - Keysight
- Model: U1818A
Active Differential Probe, 100 kHz to 7 GHz The Agilent U1818A 100 kHz to 7 GHz active differential probe makes it easy to perform high frequency in-circuit measurements using network, spectrum and signal source ...
Cary, NC
Trusted Seller
Keysight (Agilent) E8802A
- Manufacturer: Agilent - Keysight
- Model: E8802A
RF Vector Network Analyzer,2 Port- 3 Reciever 300 kHz-6 GHz The E8802A Vector Network Analyzer is a member of the PNA Series network analyzer platform and provides the combination of speed and precision for the d...
Cary, NC
Trusted Seller
Keysight (Agilent) 8712ET
- Manufacturer: Agilent - Keysight
- Model: 8712ET
Economy RF Vector T/R Network Analyzer, 300 KHz - 1.3 GHz The Agilent 8712ET features a built-in transmission/reflection test set with a full range of magnitude and phase measurements. Two independent channels ca...
Cary, NC
Trusted Seller
HP Agilent Keysight N4692A
- Manufacturer: Agilent - Keysight
- Model: N4692A
HP Agilent Keysight N4692A Electronic Calibration Module (ECal) 40 GHz 2.92 mm
Cary, NC
Trusted Seller
Keysight (Agilent) 8510C
- Manufacturer: Agilent - Keysight
- Model: 8510C
Network Analyzer The 8510C vector network analyzer continues to provide the best performance to meet your new design and test challenges. With unmatched accuracy and convenience, the 8510C vector network analyzer...
Cary, NC
Trusted Seller
Keysight (Agilent) N4417A
- Manufacturer: Agilent - Keysight
- Model: N4417A
Balanced Measurement S-parameter Test Set, 30 kHz to 9 GHz The Agilent N4417A S-parameter test set is a key component of an Agilent physical layer and balanced-measurement system. When combined with an Agilent PN...
Cary, NC
Trusted Seller
Keysight (Agilent) N4415A
- Manufacturer: Agilent - Keysight
- Model: N4415A
Balanced Measurement S-parameter Test Set, 30 kHz to 6 GHz The Agilent N4415A S-parameter test set is a key component of an Agilent physical layer and balanced-measurement system. When combined with an Agilent 87...
Cary, NC
Trusted Seller
Keysight (Agilent) 85033E
- Manufacturer: Agilent - Keysight
- Model: 85033
Standard Mechanical Calibration Kit, DC to 9 GHz, 3.5 mm The Agilent 85033E calibration kit contains precision 3.5mm standards used to calibrate Agilent network analyzers. Standards include fixed terminations, op...
Cary, NC
Agilent - Keysight 85101 Network Analyzer
- Manufacturer: Agilent - Keysight
- Model: 85101
Good condition Agilent - Keysight 85101 Network Analyzers. Located in USA and other countries. Click request price for more information.
USA