Used Agilent - Keysight Test Generators

Agilent/Keysight 34504A

• Manufacturer: Agilent - Keysight

The Model 34504A multiplexers provide broadband switching of high-frequency analog or digital signals. The HP 34504 switches both the center conductor and the shield. Key Specifications:

Agilent/Keysight 34506A

• Manufacturer: Agilent - Keysight

The Model 34506A matrix card come in variety of configurations, densities, and bandwidths. For higher bandwidth applications, look at the HP 34506 Switched Shield Matrix. Special cable kits allow many of this mod...

Agilent/Keysight 11612A

• Manufacturer: Agilent - Keysight
• Model: 11612A

The Agilent 11612A broadband high power bias network can be used in a wide variety of biasing applications for test and measurement requirements in laboratory and production environments. Bias networks provide th...

Agilent/Keysight 495A

• Manufacturer: Agilent - Keysight
• Model: 495A

The Model 495A is broadband linear amplifier that provide signal amplification to at least 30 db. The Model 495A covers the 7.0 to 12.4 gc range. This instrument produce at least 1 watt at the output with the app...

Agilent/Keysight 85043A

• Manufacturer: Agilent - Keysight

The HP 85043A system rack stands 123.7 cm (48.7") high, 60 cm (23.6") wide, and 80 cm (31.5") deep. Complete with support rails and ac power distribution (suitable for 50 to 60 Hz, and 110-240 Vac), it includes r...

Agilent/Keysight 86210A

• Manufacturer: Agilent - Keysight

The 86210A has + 13 dBm maxmum calibrated output power levelled to ±0.25 dB. Accuracy is ±7 MHz in CW mode and ±10 MHz in all sweep modes. A special frequency adjustment control lets you maintain frequency calibr...

Agilent/Keysight 21364A

• Manufacturer: Agilent - Keysight

The Philips 21364A Transesophageal (TEE) transducer has a frequency range of 3.7 MHz. - 5.0 MHz. and supports the following applications: Transesophageal. The Philips T5012 (21364A) transducer is compatible with:...

Agilent/Keysight 11881A

• Manufacturer: Agilent - Keysight

The HP 11881A fits over the tip of the HP85024A active probe and provides the following hanges to HP 85024A operating parameters: Increases (by a factor of 10) the input voltage at which 1 dB compression occurs. ...

N5181A | Agilent MXG Analog Signal Generator 100kHz-3GHz MY47071245 Option 503 UNT - Used

• Manufacturer: Agilent - Keysight
• Model: N5181A

Agilent/Keysight 85138A

• Manufacturer: Agilent - Keysight
• Model: 85138A

The Keysight 85138A is a precision, low-reflection dc to 50 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard. The Keysight 85138A ...

N5181A | Agilent MXG Analog Signal Generator 100kHz-3GHz MY48180029 Option 503 UNT - Used

• Manufacturer: Agilent - Keysight
• Model: N5181A

Agilent/Keysight 11591A

• Manufacturer: Agilent - Keysight
• Model: 11591A

The 11591A APC-7 connector tool kit contains tools for the repair of amphenol* precision 7-mm sexless connectors. Inspect the kit for contents and for mechanical damage incurred in transit. If there is damage or ...

Agilent/Keysight 746A

• Manufacturer: Agilent - Keysight
• Model: 746A

The HP Model 746A High Voltage Amplifier complements the -hp- Model 745A AC Calibrator by extending its voltage range to 1000 volts rms plus 100 volts overrange. The 746A is basically a times 10 amplifier with ou...

Agilent/Keysight 86790A

• Manufacturer: Agilent - Keysight

Modulation Data Source As-is: Unit Sold AS-IS | Cal: Calibration Available

Agilent/Keysight 3785A

• Manufacturer: Agilent - Keysight
• Model: 3785A

The Keysight / Agilent / HP 3785A Jitter Generator and Receiver is a dedicated jitter measurement system for testing and evaluating the performance of CEPT or Bell digital transmission terminal and link equipment...

Agilent - Keysight 83624L Test Generator

• Manufacturer: Agilent - Keysight
• Model: 83624L

Good condition Agilent - Keysight 83624L Test Generators. Located in USA and other countries. Click request price for more information.