Used Bending & Forming in Bavaria, Germany

Trusted Seller
ZOPF P38 Evo
- Manufacturer: Zopf
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Engine: 2,8KW | Weight of the machine approx.: 320kg | Dimensions of the machine approx.: 86 x 90 x 85cm
Günzburg, Germany
Trusted Seller
ROLLMAK BMH 400
- Manufacturer: ROLLMAK
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Plate thickness: 4mm | Distance between roll centers: 132mm | Frequency: 50Hz | Volt: 380V | Weight of the machine approx.: 470k...
Günzburg, Germany
Trusted Seller
1992 KRAMER AMaut. IIIa 2500
- Manufacturer: Kramer
- Model: AMaut
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Plate thickness: 3mm | Bending angle: 165° | Weight of the machine approx.: approx. 3,900kg | Dimensions of ...
Günzburg, Germany
Trusted Seller
ROLLMAK BM 250
- Manufacturer: ROLLMAK
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Plate thickness: 2,5mm | Roll diameter: 95mm | Weight of the machine approx.: 295kg | Dimensions of the machine approx.: 1482x45...
Günzburg, Germany
Trusted Seller
ROLLMAK BM 400
- Manufacturer: ROLLMAK
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Plate thickness: 4mm | Roll diameter: 133mm | Weight of the machine approx.: 440kg | Dimensions of the machine approx.: 1580x550...
Günzburg, Germany
Trusted Seller
ROLLMAK BM 125
- Manufacturer: ROLLMAK
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Plate thickness: 1,25mm | Distance between roll centers: 62 | Weight of the machine approx.: 130kg | Dimensions of the machine a...
Günzburg, Germany
1998 round bending machine Coil-Tec SM
- Manufacturer: Coil-Tec
Round bending machine, with U-frame, folding nut, mobile Machine is repaired, inspected, cleaned by a professional and is then fully functional. Test run is performed.
Hohenbrunn, Germany
1998 round bending machine Schwartmanns WSRV 03.2
- Manufacturer: Schwartmanns
used Schwartmanns 3-roll round bending machine, with wire forming grooves, folding groove and swiveling upper glove, rear roller adjustable via the rack, machine repaired by a specialist, tested, cleaned and then...
Hohenbrunn, Germany
Fasti 125-10/1.5 round bending machine
- Manufacturer: Fasti
Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...
Hohenbrunn, Germany
2017 Schröder AKV swivel bending machine
- Manufacturer: Schroeder
Used Schröder swing bending machine with pneumatic bending jaw support (Compressed air required) with manual Knoll roller shear, with Knoll profiling and closing head The machine will be professionally repaired...
Hohenbrunn, Germany
1987 Biegemaster BMTH long bending machine
- Manufacturer: Biegemaster
The used 8-meter Biegemaster long-reach bending machine offers a robust solution for the precise bending of sheet metal over long lengths. The new control system with memory and adjustable bending parameters ensu...
Hohenbrunn, Germany
Trusted Seller
Auction
Crimping pliers DCM HX4
- Manufacturer: DCM
with pressing tool Y205P
Gauting, Germany
Visit Auction Website
Trusted Seller
Auction
Crimping pliers DCM HX4
- Manufacturer: DCM
with pressing tool Y205P
Gauting, Germany
Visit Auction Website
Trusted Seller
Auction
Crimping pliers DCM MH860
- Manufacturer: DCM
Gauting, Germany
Visit Auction Website
Trusted Seller
Auction
Crimping pliers DCM AFM8
- Manufacturer: DCM
Gauting, Germany
Visit Auction Website