Used Drilling Rigs in New York, USA

2004 INGERSOLL RAND TH60 DRILL RIG #11116Ta
- used
- Manufacturer: Ingersoll Rand
- Model: TH-60
Manufactured 2004, 1070/350 IR air compressor (new 2021), Cummins engine (rebuilt 2021), new transfer case 2022, mounted on International Paystar tri-drive, set up for 3-1/2” drill rods, located Canada Price:...
Oceanside, NY
FAILING 1500 DRILL RIG #2387T
- used
- Manufacturer: Failing
- Model: 1500
Rig and truck reworked in 2022, HD drawworks, dual band brakes, 3rd line, 5 x 6 Gardner Denver mud pump, 8” rotary table, 2-7/8” kelly, chuck pulldown, mechanical clutches, mounted on 1999 International tande...
$144,500 USD
Get financing
Est. $2,719/mo
Oceanside, NY
INGERSOLL RAND TH60 / CYCLONE DRILL RIG #4467T
- used
- Manufacturer: Ingersoll Rand
- Model: TH-60
No air (but plumbed for air), Gardner Denver 5 x 6 mud pump, 30’ derrick, mounted on 2001 International 5600 I6x4 truck with 470 HP Cat diesel engine, PTO, new front tires, 30’ extended derrick, direct hydrauli...
Oceanside, NY
1999 INGERSOLL RAND TH60 DRILL RIG #5158T
- used
- Manufacturer: Ingersoll Rand
- Model: TH-60
Manufactured 1999, 825/350 air compressor, 4 x 3 centrifugal mud pump (new, not attached and needs to be assembled), Mounted on International Paystar truck with Cat C15 PTO diesel engine (rebuilt with 2,700 ho...
$325,000 USD
Get financing
Est. $6,117/mo
Oceanside, NY
1978 SCHRAMM T64 DRILL RIG MODIFIED #5882T
- used
- Manufacturer: Schramm
Manufactured 1978, 900/250 Sullair compressor, mounted on 4 axle (3 rear, 1 front) Freightliner truck with Detroit Series 60 diesel engine, Funk gear box, 42 gpm pump, rod box, no carousel, extended mast 41’, “...
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
SPENCER HARRIS 7000/CARDWELL 210 DRILL RIG #934T
- used
- Manufacturer: Cardwell
Cardwell 210 single drum drawworks, 96’ x 250,000# Spencer Harris derrick, 4 crown sheave, hydraulically raised with 2-way cylinder, cable scoped, derrick board, Bear air, weight indicator, hydraulic kelly pul...
$550,000 USD
Oceanside, NY
1983 INGERSOLL RAND TH60 DRILL RIG #10631T
- used
- Manufacturer: Ingersoll Rand
- Model: TH-60
Manufactured 1983, retrofitted with 900/300 air compressor (installed 2019 with approx. 1400 hours), Deutz V12 twin turbo deck engine, mounted on 2002 Forden truck with Cummins engine, 4000 miles, rod box, no...
Oceanside, NY
1999 INGERSOLL RAND T3 DRILL RIG #11116Tb
- used
- Manufacturer: Ingersoll Rand
Manufactured 1999, 900/350 Doosan air compressor (new 2022), Cat 3406 deck engine (rebuilt May 2022), approx 950 hours on compressor and engine), rotation head completely rebuilt 2024 as well as most hydraulic...
Oceanside, NY
2014 INGERSOLL RAND T3W DRILL RIG #3363T
- used
- Manufacturer: Ingersoll Rand
- Model: T3W
Manufactured 2014, 1070/350 IR air compressor, approx. 3,300 original hours as of August 1, 2024, Cummins QSK15 deck engine, 40,000# pullback, hydraulic tensioning system, 25 gpm Bean water pump, mounted on 20...
$860,000 USD
Oceanside, NY
NORMAN MICHAEL DRILLING RIG #8292T
- used
- Manufacturer: Norman
) Double drum, manufactured mid to late 2000’s, 18” Failing rotary table, 5-1/4” hex kelly, mounted on 3 axe trailer with Detroit 8V92T, Allison transmission, 7-1/2 x 14 Gaso mud pump on trailer, approximatel...
$275,000 USD
Get financing
Est. $5,176/mo
Oceanside, NY
CYCLONE 36 DRILL RIG #2604T
- used
3 line machine, gas deck engine, mounted on 1989 Ford F800 2WD truck with gas engine, 1 front, 2 rear, and 2 center hydraulic leveling jacks, tools Price: $47,500 - Ohio SANDERSON CYCLONE 36R COMBINATION RO...
Oceanside, NY
DELMAG RH34 DRILL RIG #10185Tb
- used
- Manufacturer: Delmag
- Model: RH34
Built 2015, new engine 2021, BT340 rotary, 4-section leader mast, standard mast foot in length 2.400mm, intermediate leader mast section in length 8.920mm, mast extension in total length of 6.100mm, leader mas...
Oceanside, NY
FAILING 1500 DRILL RIG #7544Tb
- used
- Manufacturer: Failing
- Model: 1500
Mounted on 1964 Chevy truck, 471 Detroit diesel, 7-1/2” x 8 GD FXX172 mud pump, 42’ derrick (2-sections), hydraulic pulldown, 30” stroke, hydraulic table, stored inside a barge for 7 years Price: $87,500
$87,500 USD
Get financing
Est. $1,647/mo
Oceanside, NY
FAILING CFD2 DRILL RIG #8107T
- used
- Manufacturer: Failing
- Model: CFD2
Built 1964, 4-1/2 x 5 Failing mud pump, Grimmer Schmidt 125cfm developmental air compressor, 5-1/4” stationary table, 2-3/8” kelly, 10' stroke, mounted on 1984 International truck with DT466 engine, PTO), 4 hyd...
$62,500 USD
Get financing
Est. $1,176/mo
Oceanside, NY
CABOT 750 DRILLING RIG #1125T
- used
- Manufacturer: Franks Cabot
Cat 3412 engine with Allison 5860 transmission, 1-1/8 drilling line, 96’ x 300,000# derrick, 4-sheave McKissick block, standpipe, kelly hose with sub and ramp, 27-1/2” rotary table Price: $395,000
$395,000 USD
Get financing
Est. $7,434/mo
Oceanside, NY
Failing F6 Drilling Rig
- used
- Manufacturer: Failing
- Model: F6
Good condition Failing F6 Drilling Rigs available between 1990 and 1992 years. Located in USA and other countries. Click request price for more information.
USA