Used Drilling Rigs

1997 INGERSOLL-RAND DMLSP

• Manufacturer: Ingersoll Rand

DTH Class Single Pass Drill Rig – 55’ft – 60’ft Mast Cummins QSK19 Diesel Engine High Pressure – IR HR2.5 – 1050 CFM @ 350 PSI Onboard Air Compressor CAT 330L&S Undercarriage

ARDCO 4 X BUGGY DRILL RIG AND TRANSEQUIP WATER #4038Ta

Rig has Cummins 5.9 diesel engine Price: $115,000 for both

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #5067T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 2008 gooseneck trailer, 2011 66HP Tier 4i engine with approx. 1310 hours, California Carb Compliant, 40’ mast height, 2 breakout wrenches, no other tooling, currently working Price: $57,000 - Californi...

1990 CANTERRA CT-350 AUGER DRILL RIG #2596T

Manufactured 1990, auger has updated hydraulic pump for controls, long tower, 3 winches, including jib winch, sandline with rapid reverse (used to drive pipe into ground), 10,000 lb torque tophead, drillers platf...

2015 EPIROC FLEXIROC D60

• Manufacturer: Epiroc

DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.

2015 ATLAS COPCO FLEXIROC D60

• Manufacturer: Atlas-Copco
• Model: FLEXIROC D60
• Horsepower: 474.72181945070787 horsepower
• Drilling depth: 55.5 meter

DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.

CABOT 750 DRILLING RIG #1125T

• Manufacturer: Franks Cabot

Cat 3412 engine with Allison 5860 transmission, 1-1/8 drilling line, 96’ x 300,000# derrick, mounted on 5 axle carrier, 4-sheave McKissick block, standpipe, kelly hose with sub and ramp, 27-1/2” rotary table Pric...

1994 GARDNER DENVER 15W DRILL RIG #4411T

• Manufacturer: Gardner Denver

Manufactured 1994, 10” table, 2 x 4 x 13 centrifugal mud pump, long kelly, air drawworks, mounted on 1994 Western Star truck, drilling daily, drawworks and table recently rebuilt, hydraulic pump cylinders rebuilt...

CHALLENGER 360 DRILL RIG #836T

Challenger 360 drawworks (500 HP) (rated to 6,500' with 4 1/2" drill pipe), (1) Series 60 12.7 liter 500 HP, Challenger 200 - 84' H - 300,000# SHL derrick,, 10' adjustable substructure, HT - 18" x 44" rotary tabl...

CYCLONE 36R DRILL RIG AND GROUT PUMP #9878R

Mounted on 1985 International Paystar 5000 all wheel drive, 672 Detroit diesel deck engine, 6 cylinder air compressor, 3 x 2 Mission Magnum pump, includes bits, stabilizers, hole opener, trailer mounted grout pum...

SIMCO 2400 TRACK MOUNTED AUGER DRILL RIG #5453Tc

• Manufacturer: Simco

Diesel engine, cathead, track mounted, no auto hammer Price: $57,500

1995 CME 45C AUGER DRILL RIG #5358T

Manufactured 1995, fully refurbished, new 3 cylinder diesel engine (3 hours), new transmission, new cylinders, new pump, 1 winch, auto hammer, cathead, wiggle tail, all new LED lighting, mounted on 1995 Ford F800...

1995 MOBILE B47 AUGER DRILL RIG #619Tb

Manufactured 1995, Deutz ediesel engine, cathead, winch, hydraulic driven, Marooka carrier, no leaks, runs great Price: $87,500

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

Ingersoll Rand CM-351 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: CM-351

Good condition Ingersoll Rand CM-351 Drilling Rigs available between 1985 and 1999 years. Located in USA and other countries. Click request price for more information.