Used Electrical Test Instruments in Gauteng, South Africa

Deviser EP350 PON Power Meter -30~+13dBm

• new

The power meter has a variety of options to meet customers’ specific requirements. Customers can choose between single- or dual-layer PON testing and RF overlay supporting RF video. Main technical specifications ...

TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2

• new

• Manufacturer: LiSN

The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...

Probe for 3 kHz to 100 MHz

• new

The TBCCP1-3K100 is a coaxial RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat ...

TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F

• new

• Manufacturer: LiSN

The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...

Coupling Decoupling Network M1

• new

The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

Grandway OLT55-AHR – Optical Return loss tester

• new

It can perform automatic bidirectional loss test on single fiber with Pass/Fail assessment. With rich functions, flexible configuration and excellent user friendly design, OLT-55 is the ideal optical loss tester ...

TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2

• new

• Manufacturer: LiSN

The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...

TBOH01 5 µH, 10A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025

• new

• Manufacturer: LiSN

The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserte...

TBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2

• new

• Manufacturer: LiSN

The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...

Coupling Decoupling Network M4

• new

The TBCDN-M4 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M4 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

Coupling Decoupling Network M2

• new

The TBCDN-M2 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M2 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

TESCA Sequential Logic Tutor

• new

The Electronic Sequencer is intended for elementary as well as advance training of digital electronics. The trainer cover regular digital circuits by solder less inter connections through use of 4 mm brass termin...

Dummy Load (-105dBc) Connector: N-M

• new

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-M

Chauvin Arnoux C.A 732 Non-contact voltage tester CAT III 1000 V LED

• new

• Manufacturer: Chauvin Arnoux

Deviser EP310 Series PON Power Meter

• new

The EP310 is a passive optical network (PON) power meter that enables users to quickly validate PON network installations. It measures 3 wavelengths (1310/1490/1550 nm) at once, with user-defined limits and USB d...