Used Extruders in New York, USA

1″ Killion Extruder

• used

3.5″ Welex 30:1 Extruder

• used

• Manufacturer: Welex

3.5″ WELEX EXTRUDER SINGLE SCREW Specifications: Screw Diameter 3.5″ L/D Ratio 30:1 Barrel Zones 5 HP Capacity 430 HP Type of Cooling Water Cooled Electrics 480V Pump 2 HP Recirculation Pump with Heat Exchanger G...

KMD 125 mm Extruder

• used

1998 Milacron Apex 6.0 Extruder

• used

• Manufacturer: Milacron

65" X 24" Cinn/HPM w/6" Ext. 65" X 24" No wind or shear 1998 Used 65" wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr. Includes the following:6" HPM extruder 30...

1.5″ Killion LAB Extruder – PRISTINE !!!!!!!

• used

2.5″ Crown 36:1 Extruder – 2015

• used

• Manufacturer: Crown

2.5″ Crown 36:1 L/D Extruder – 2015 Expected Rate: 10-200 Kgs/hr. Extruder Specification: 2.5” Dia., 36:1 L/D Ratio Barrel Centerline: 40″ Horsepower: 75HP Drive: AC Screw RPM: 140 Max PSI: 10,000 # of Barrel Zon...

AET 10/6″ Dual Diamter Extruder

• used

AET dual diameter 10″-6″ – 32:1 L/D 50” centerline height film reclaim extruder with Koellmann gear double reduction gear reducer, with oil pump, heat exchanger cooling system, cast water cooled feed throat with...

3.4″ Davis Std. Extruder (Recently Rebuilt)

• used

• Manufacturer: Davis-Standard

3.4″ Davis Std. Extruder (Recently Rebuilt) 50 HP AC Motor with AC Drive – rated up to 100 HP 24:1 L/D Ratio – Non-Vented Eurotherm Controllers Screw in Good Condition NOTE: Rebuilt and painted 2 years ago, never...

4″ Berlyn 30:1 – Air Cooled Extruder

• used

4’’ 30:1 Berlyn Extruder Air cooled 150 H.P. D.C. Was running poly pipe 450 # per Hour

3.5″ Polytruder 24:1 Air Cooled Extruder

• used

3.5″ Davis Std. 75 HP Air Cooled Extruder

• used

• Manufacturer: Davis-Standard

1997 Davis Standard 3.5 Inch Single Screw Extruder:

3.5″ Davis Std. 24:1 Extruder Model 35IN35

• used

• Manufacturer: Davis-Standard

3.5″ Davis Std. 24:1 Extruder – Model 35IN35 – New in 1995 – but Refurbished since and not been used since … 50 HP AC motor and Drive Air Cooled 5 Barrel Zones – 3 Die Zones

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned

• used

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned 42″ Centerline – 36:1 L/D Ratio – 6″ x 3.5″ feed throat, Belt Driven through a 13.95:1 Koellman PEZS 360/3.5 Gearbox, Rated to 125 HP, 75 HP Baldor DC Motor with R...

1 1/4″ Davis Standard Extruders (Stripers) 4 Available

• used

• Manufacturer: Davis-Standard

Battenfeld Uni-Ex Extruder

• used

• Manufacturer: Battenfeld
• Model: Uni-Ex

Good condition Battenfeld Uni-Ex Extruders manufactured in 1985. Located in USA and other countries. Click request price for more information.