Used Materials Testing in Taiwan

Spray Tester Confirm to JIS- L1092 , BS EN 24920 , AATCC-22 , ISO 4920, ASTM D1913-2000, ASTM D583-54 Standard

• Manufacturer: cometech testing machines

QC-305 may test water-proof or non-water-proof textile surface water resistance. Clamping textile with 45 degree angle on grip, hold open around 150mm diameter plane, putting sprayer above sample center 150mm, sp...

Coefficient of Friction Tester, Motor Coefficient of Friction Tester Confirm to TAPPI T-815, ASTM D202 Standard

• Manufacturer: cometech testing machines

QC-117 & QC-117A Put specimen on the platform, and then put dead weight on the top of specimen according to standard requirement. Let platform angle goes up until the deadweight slides down. Get the tan value fro...

Portable Hydrostatic Head Tester

• Manufacturer: cometech testing machines

QC-317M(N) Portable design and without electricity that can proceed with test. No time and space limitations, mainly used on the spot measurement, inspect textile water-resistance ability. The test method is divi...

DIN Abrasion Tester Confirm to DIN53516 ISO-4649 GB/T 9867 SATRA TM174 Standard

QC-618A is suitable for elastic material, rubber, tires, conveyor belts, transmission belts, shoe soles and software synthetic leather. The specimen of wear area is dia. 16mm which provide the required load and t...

Tape Holding Power Tester (Normal Type) 10 sets Confirm to GB/T 4851, ASTM D3654, PSTC 7 Standard

• Manufacturer: cometech testing machines

QC-801(A)(B)(C) Specimen stick test area can use 1/2”x1”or 1”x1”, unified to use 0.45 pound of load scrunch through specimen, hanging counterweight in the lower end of specimen. Timer automatically stops counting...

X-Sight ONE Video Extensometer

• Manufacturer: cometech testing machines

The common contact type extensometer might have the unstable results or inconvenient operation issues due to its clamping, counterweight, eccentricity and the operation space problems. It has high possibility to ...

GR-B050 90° peel grips

• Manufacturer: cometech testing machines

Capacity: 200N | Jaw face width: 5-10mm | Specimen thickness: 0.01~3mm | Temperature limits: 0~100℃ | Weight: 2200g set | Standard: ASTM D3330

GR-M020 Short Distance Compressive Grip

• Manufacturer: cometech testing machines

Capacity: 2kN | Jaw face width: 30x30mm | Specimen thickness: 16mm | Mini. load cell: 200N | Temperature limits: 0~100℃ | Weight: 4637g | Standard: TAPPI T826

GR-M010 Finch Wet Tensile Strength Grip

• Manufacturer: cometech testing machines

Capacity: 1kN | Jaw face width: 25mm | Specimen thickness: 230mm | Mini. load cell: 50N | Temperature limits: 0~100℃ | Up weight: 827g | Down weight: 1140g | Standard: TAPPI T456

GR-I010 Uniaxial Grip

• Manufacturer: cometech testing machines

Platen area: 60x60mm | Range of movement: ±25mm | Temperature limits: 0~200℃ | Weight: 1463g

GR-I030 Screwed Collect Grip

• Manufacturer: cometech testing machines

Capacity: 500N | Jaw face width: 1~9mm | Mini. load cell: 100N | Temperature limits: 0~100℃ | Weight: 621g

GR-K040 Hook Grip

• Manufacturer: cometech testing machines

Capacity: 500N | Jaw face width: 20mm | Specimen thickness: 0.2~3mm | Mini. load cell: 50N | Temperature limits: 0~100℃ | Weight: 827g

GR-H04A Pneumatic String Grips

• Manufacturer: cometech testing machines

Capacity: 3kN | Specimen thickness: 0.1~6mm | Mini. load cell: 200N | Temperature limits: -10~60℃ | Weight: 9033g | Standard: ASTM D2256

GR-F040 Wedge Grip

• Manufacturer: cometech testing machines

Capacity: 200kN | Jaw face width: 46mm | Mini. load cell: 20kN | Temperature limits: -10~200℃ | Weight: 19150g

GR-F020 Wedge Grip

• Manufacturer: cometech testing machines

Capacity: 50kN | Jaw face width: 40mm | Mini. load cell: 5kN | Temperature limits: -10~200℃ | Weight: 10163g