Used Foundry & Casting in Wallonia, Belgium

Trusted Seller
Moulding unit HWS/HSP1, hydraulic 500mm x 400mm
- used
Serial number: 10502Year of construction: 1992Weight: ± 22 000 kgDimensions: 2700 mm x 2000 mm x 2700 mmPower: 400V, 50 Hz32 molding boxes = 16 pairsDimensions of boxes: 500 mm x 400 mm x 150/150 mmWith transport...
Amel, Belgium
Trusted Seller
Shake out grid, 2100 mm x 1170 mm
- used
External dimensions: length 2460 mm, width 1500 mm, height 800 mm On 16 springs (spiral springs) Imbalance axle
Amel, Belgium
Trusted Seller
Flat loading band with cleats, 4900 mm x 600 mm
- used
External dimensions: length 6600 mm, width 1150 mm, height 2000 mm With two sides emergency rip cord
Amel, Belgium
Trusted Seller
Sandlaboratory rammer GF, SPRA
- used
With sample sleeve Weight: ± 15 kg | Dimensions: width 220 mm, depth 210 mm, height 730 mm
Amel, Belgium
Trusted Seller
Hydraulic unit, 3 kW
- used
Engine: 3 kW, 24 V,165 Amp. brand: HAGGLUNDS, type: MTL9-7A, 3250 rpm, serial number: 1213378 With hand valve ' lever up -motot start and oel press , lever down oil return - lower
Amel, Belgium
Trusted Seller
Camera with endoscope KS TOOLS
- used
In black box Endoscope lens Ø 8,5 mm Weight: ± 5 kg | Dimensions: length 370 mm, width 290 mm, height 70 mm
Amel, Belgium
Trusted Seller
Shake-out grid 1780mm x 1170mm
- used
- Manufacturer: FM Industries
Brand: FM IndustriesWeight: 800kgOutside dimensions: 1900mm x 1900mm x 1130mmInner dimensions: 1780mm x width 1170mmEngine: Leroy Somer4 kW; 220/380 V; 1430 rpmRust mesh 30 x 25mmV-belt drive 3x for green sand,wi...
Amel, Belgium
Trusted Seller
Laboratory sand rammer GF/SPRA
- used
With sample sleeve Dimensions: width 200 mm, depth 265 mm, height 680 mm
Amel, Belgium
Trusted Seller
Molding machine ZIMMERMANN G1
- used
- Manufacturer: Zimmermann
Serial number: 157118Dimensions: 750 mm x 1060 mm x 1710 mmPressing pressure: 4000 kg at 6 barJolt capacity: 200 kgBox size: 750 mm x 550 mmPress stroke: 100 mmLifting stroke: 200 mmUseful height: 500 mmWith SIEM...
Amel, Belgium
Trusted Seller
Jolt-squeeze moulding machine ZIMMERMANN GO/2B
- used
- Manufacturer: Zimmermann
This machine shakes under pressure Number: 129714 | Press pressure: 3000 kg | Payload: max. 120 kg | Weidth max. moulding boxes: 450 mm | Table size: 570 mm x 430 mm | Press stroke: 90 mm | Lifting stroke: max. 1...
Amel, Belgium
Trusted Seller
Jolt-squeeze moulding machine ZIMMERMANN GO/2B
- used
- Manufacturer: Zimmermann
This machine shakes under pressure Press pressure: 3000 kg | Payload: max. 120 kg | Weidth max. moulding boxes: 450 mm | Table size: 570 mm x 430 mm | Press stroke: 90 mm | Lifting stroke: max. 150 mm
Amel, Belgium
Trusted Seller
1997 EIRICH mixer R 11, 300 l max .5-6t/h
- used
- Manufacturer: Eirich
- Model: R11
With sand loading hopper and 1 additive hopper With EIRICH control board SIMATIC S5 With EIRICH water dosing and seperate control board With hydraulic unit (with new control board and new water dosing on request)
Amel, Belgium
Trusted Seller
Magnetic steerer with heating
- used
- Manufacturer: Heidolph
- Model: MR2002
With intensity regulator from 1 up to 1250 rpm Weight: ± 4 kg | Engine: 1250 rpm | With heating: 0 - 350 ° Celsius
Amel, Belgium
Trusted Seller
Double samples polisher BÜHLER METASERV, Ø 200 mm
- used
- Manufacturer: Bühler
Dimensions: Lenght: 640mm; Width: 600mm Polishing disc Ø 200 mm With water moist 220-240V; 550 Watt; 50r/min; 5A; single phase
Amel, Belgium
Trusted Seller
1973 Shell moulding machine SHALCO U900
- used
External dimensions: length 3900 mm, width 1900 mm, height 2100 mm 700/13 rpm, 1410/27 rpm Without control panel With belt outlet With hydraulic unit (400 V, 15 kW)
Amel, Belgium