Anritsu MF76A
used
- Manufacturer: Anritsu
- Model: MF76A
This frequency counter has a frequency of Channel 2 from 0.2GHz to 18GHz and the input impedance of 50Ohms. This unit has a DC input coupling and the sensitivity of 39.7635364383525 mV.
Webster, MA
Tektronix DC501
used
- Manufacturer: Tektronix
- Model: DC501
This Counter measures frequency from 10Hz to 110MHz, and totalizes from 0 to 107 at a max rate of 110MHz. This is a Tek DC501 100MHz direct reading counter. It is designed to operate in a TM 500 Series Power Modu...
Webster, MA
Tektronix CFC-250
used
- Manufacturer: Tektronix
- Model: CFC250
This counter counts the signal frequency of sine, square, and triangle waves from 5Hz to 100MHz at input levels from 30mV to 42V peak.
Webster, MA
Tektronix DP501
used
- Manufacturer: Tektronix
- Model: DP501
This Prescaler is designed for use with all TM500 - TM5000 series counters. This unit, however, can be used with any counter. The prescaler is connected between the signal source and the counter input terminal. T...
Webster, MA
Anritsu MF1601A
used
- Manufacturer: Anritsu
- Model: MF1601A
This counter is compact and easy to operate frequency counters. The reliability and cost performance has been upgraded by developing a new custom to reduce the number of logic circuits and by using a microprocess...
Webster, MA
Tektronix CMC250
used
- Manufacturer: Tektronix
- Model: CMC250
This Counter measures frequency of sine,square and triangle waves from 5Hz to 1.3MGz. This unit also provides period measurements and totalize functions. Channel A is a standard 1Mohm input for frequency measurem...
Webster, MA
Tektronix DC508
used
- Manufacturer: Tektronix
- Model: DC508
This Counter is designed to operate in TM 500 / TM 5000 series mainframes and measures frequency from 10Hz to 1GHz Separate inputs are used for the 10Hz to 100MHz, and 100MHz to 1GHz A switch selectable frequenc...
Webster, MA
Tektronix DC-5009
used
- Manufacturer: Tektronix
- Model: DC5009
This Universal Counter / Timers reciprocal frequency measurement technique allows up to eight digits of resolution of low frequency signals in one second or less of measurement time. This unit provides 135MHz in ...
Webster, MA
Fluke 1952B
used
- Manufacturer: Fluke
- Model: 1952B
This Universal Counter Timer measures frequency (DC 80MHz), frequency ratio, time interval, period, period averages, and a gateable totalize with 7 digit accuracy. It is standard with two input channels (complete...
Webster, MA
Tektronix DC504
used
- Manufacturer: Tektronix
- Model: DC504
This Counter can obtain a resolution of 0.1Hz by allowing the more significant figures of the counter to overflow. Five 7 segment light emitting diodes (LED's) provide a visual numeric display. The decimal point ...
Webster, MA
Fluke 7220A
used
- Manufacturer: Fluke
- Model: 7220A
This Communications Counter gives you 10Hz to 1300MHz coverage via two separate channels. Channel A is for low frequency applications (10Hz to 125MHz), where the loading of the signal source and the effects of hi...
Webster, MA
Fluke PM6681R
used
- Manufacturer: Fluke
- Model: PM6681
This unit is a Calibrator Counter Analyzer with a Rubidium Frequency Reference. Sensitivity, Channel 1 20 mV Maximum Input Voltage, Ch. 1 350 V Input Impedance, Ch.1 1 MOhm Input Attenuation, Ch 1 x1,x10 Inpu...
Webster, MA
Tektronix DC503
used
- Manufacturer: Tektronix
- Model: DC503
This Counter has two input channels, A and B, each with 125MHz capability. Each channel has separate triggering level, triggering slope, attenuator, and coupling mode controls. Signals to be counted or timed can ...
Webster, MA
Tektronix DC505A
used
- Manufacturer: Tektronix
- Model: DC505A
This Plug-in is a used Frequency Counter Plug-In that is designed to operate in a TM 500 Series Power Module. This unit has seven measurement functions, such as frequency counting, finding frequency ratios, perio...
Webster, MA
Webster, MA
Tip: Enter manufacturer, model or keyword