Used browse categories

Eimco 6 x 6 Disc Filter

• Manufacturer: Eimco

6 ft. dia. x 6 ft. wide. Electric drive motor. Manual speed control. Right angle gear reducer to main drive. Presently fitted with 3 sets of discs.

Action Mining M10 Wave Table

3-8 tons per hour. Adjustable spray bar. 3 hp hydraulic power system. Tabletop constructed of gel coated fiberglass. 2 Units available.

Goldfield Goldtron Concentrating Table

• Manufacturer: Goldfield

Water Sprayers: Adjustable Rate Sluice Run Vari-Drive Motor Speed Controllers: Power Requirements: Overall Dimensions:

Eimco Disc Filter Skid-Mounted Operating Module

• Manufacturer: Eimco

Consisting of: Eimco 4ft Diameter, 4-Section Disc Filter with Rotary Valve Comes with a Reeves Vari-Speed Controller Driven by a 1HP Gearhead Motor 18in Dia. x 7ft High Filtrate Tank Sutorbuilt Rotary Lobe Blower...

Oro Industries 42in Centrifugal Concentrator

• Manufacturer: Oro Industries

Controls Panels Installed Electric Over Hydraulic 35HP Electric Motors

FLSmidth Knelson QS48 Gravity Concentrator

• Manufacturer: FLSmidth

General Model Specifications: Feed Top Size: Style: Gravity Concentrator | Max feed capacity (solids): 400 Tonnes/hr. (440 TPH) | Max total volumetric throughput: 545 m³/hr. (2,400 US GPM) | Feed density (solids ...

Knelson XD70 Centrifugal Concentrator

• Manufacturer: FLSmidth Knelson Concentrators

General Model Specifications: Feed Size: Style: Gravity Concentrator | Solids feed capacity: 330-1100 TPH | Fluidization water required: 68-125m³/hr. (300-550 US GPM) | Max volumetric throughput: 1360m³/hr. (6,00...

Citic 30ft Dia. x 16ft Long SAG Mill

• Manufacturer: Citic Heavy Industries

General Model Specifications: Size: 30ft Dia. x 16.6ft Long | Mill diameter: 9.15m Dia. (30ft) | Mill length: 5m Long (16.6ft) | Drive: Electric Motor | Power output: 7,500kW | Frequency: 50Hz | Rotation speed: 1...

Global Mining Solutions Wash Plant.

Model 1000D. Capacity 200 Yards Per Hour. Comes With 4 FT x 9 FT Tivar Oscillating Roughing and Concentrating Decks. 3/4 HP, Single phase drive motor

Hardinge-Koppers 12 x 5 Sag Mill

• Manufacturer: Hardinge

Self-Aligning Bearings Bearing Sole Plates Single Helical Bull and Pinion Gear Louis Allis 250HP Electric Motor Control Panel Falk Parallel-Shaft Gear Reducer Air Clutch Internal Grate Discharge External Trommel ...

NHI 29.5ft Dia. x 15.5ft Long SAG Mill

• Manufacturer: Northern Heavy Industries (NHI)

Size: 29.5ft Dia. x 15.5ft Long | Mill diameter: 8.8m Dia. (29.5ft) | Mill length: 4.8m Long (15.5ft) | Drive: Electric Motor | Power output: 8,000kW | Frequency: 50Hz

Sepro ISAP 5 Plant

• Manufacturer: Sepro

Consisting of: Feed Chute Fabricated from Mild Steel with Grizzly Bars Sepro Pilot Plant Rotary Scrubber - nominal dimensions 0.75m x 1.5m long. Drum Steel Lifter Bars Rubber Tire Drive Assembly: Wheels Gearbox 2...

29in Dia. Gold Wash Plant

Please contact us for more information. Drum diameter: 29in Screen | Drum length: 4ft Screening Section, 8ft Scrubber Section | Screen opening: 2in x 4in Flat Expanded | Feed hopper size: 4.5ft x 8ft | Cyclone si...

GMS 1000 Gold Wash Plant

GMS Gold Wash Plant. 6 ft. wide. Unit is reported in good condition and work ready.

150 Yard Wash Plant

Custom Built Three Deck Vibrating Screen Deck. ¼ inch Smallest Screen Includes 6ft Wide x 16ft Long Sluice Box With Miner's Moss Cat Generator Approx. 150-200 Gallon Fuel Tank Mounted on I-Beam Skids Contact Us f...