Used Processing in Minnesota, USA

Surface Combustion Batch IQ-36X48X36

• Manufacturer: Surface Combustion

Built by Surface Combustion this is a “Super 36” model, serial number BC-44455-01; - Working Dimensions of 36″ X 48″ X 36″ - Natural Gas fired, maximum operating temperature of 1850F - 480Volt - PLC Controls - In...

3000 CFH AFC Endothermic Gas Generators (2 Available)

Late Model Brick Lined Air-Cooled Endothermic Generator complete with 2 Retorts, Eclipse Burner System, Roots Pump, Waukee Mixer, Waukee Flowmeters, and Top-Mounted Air Cooler. Free Standing Control Panel complet...

Surface Combustion Generator, 6000 CFH

• Manufacturer: Surface Combustion

Endothermic Generator built by Surface Combustion. 3 “bottles” allowing for retorts to be run independently. 480/3PH, Natural Gas Fired Burners. Good condition.

“Surface Combustion” Endothermic Generator-3,000 CFH

• Manufacturer: Surface Combustion

Manufactured by “Surface Combustion” of Maumee, Ohio this is a Model S-2-EN Endothermic generator, Serial Number BC-40932-1. - 3,000 CFH Capacity - Electrically heated, 480/3ph/60cy-45kw - Digital controller and ...

Surface Combustion RX Generator 9000 CFH, 3 Bottle

• Manufacturer: Surface Combustion

Asset number: RX-3T-ABE8 | Heat source: Natural Gas | Voltage: 480 V | Max temperature: 1950º | Type of controls: PLC Controls

Surface Combustion Unidraw

• Manufacturer: Surface Combustion

Manufactured by Surface Combustion of Maumee, Ohio this is an electrically heated Unidraw. Currently set up for a 30″ wide tray it is capable of handling a 36″ wide tray by altering the roller rails giving is a w...

Buehler Samplmet-2 Abrasive Lab Saw

• Manufacturer: Buehler

Good condition Buehler Samplmet-2 metallographic wet-saw, with complete recirculation system and dual clamps. This saw is refurbished, cleaned, tested and ready to ship. The Samplmet-2 takes up to a 9″ diamond ...

Dry Coolers Five Fan Closed Loop Cooling Fans (2 Available)

- Dry Cooler 5 Fan units. - 3” copper in & Out - Both units are in working condition - Both fan units, test run good, motor starters are in the end of the unit. - Both units have been pressure tested.and pa...

Keith Kiln - 16 cuft - Periodic Electric, 1200°C

• Manufacturer: Keith

Periodic Electric 1200°C Operational Since 1997-2001

Mesh Belt Austemper Line Available-330 Pounds/Hour

• Manufacturer: AFC

Manufactured by AFC-Holcroft at their MATTSA licensed facility this is a gas fired mesh belt austemper line with a capacity of 150kg/hour (330 pounds per hour). This a complete line with automated loading system,...

-105°F to 375°F Temperature Test Chamber

• Manufacturer: Cincinnati Sub-Zero

DESCRIPTION: Stainless Steel Lined Temperature Test Chamber complete with Single Swing-Out Front Door, Wilkerson Compressed Air Dryer for Dry Air Purge, and Liquid Nitrogen Boost Capability. INSTRUMENTATION: ...

Inducto-Heat BSP5-100-3/10, 100 kW, 3/10 kHz

• Manufacturer: Inducto-Heat

Description: Inducto-Heat BSP5-100-3/10 Induction Heating Power Supply. Induction heating power supply rated at 100 kW with 3/10 kHz frequency range, complete with water system.

Ajax Magnathermic Magnescan II, Pacer -S10

• Manufacturer: Ajax Magnathermic

Description: Ajax Magnathermic Magnescan II Induction Hardening System with Pacer S-10 Power Supply. 60" single-spindle induction scanner equipped with a 150 kW, 3/10 kHz Ajax Magnathermic Pacer S-10 power supply...

2006 Leco TC40 Nitrogen/Oxygen Determinator

• Manufacturer: Leco

Description: Leco TC40 Nitrogen/Oxygen Determinator. Analytical instrument designed for precise determination of nitrogen and oxygen content in materials.

Surface Combustion Charge Car 30 x 48 System 1

• Manufacturer: Surface Combustion

Description: Surface Combustion Charge Car 30 × 48 System I. Double-ended, powered charge car complete with roller rail top.