Used Aida Machine Tools

Trusted Seller
2010 AIDA NC1
- Manufacturer: Aida
Used mechanical eccentric press with swan neck Structure: Eccentric swan neck | Press: Used | Boost:: 150 tons. | Sleigh ride: 200 mm | Number of strokes/min: 30-55 mm. | Mold height from cbra mold holder: 400 mm...
Northeast Italy, Italy
Servo press Aida DSF-TE4-20000-730-250 - 2000 ton
- Manufacturer: Aida
Servo press Aida DSF-TE4-20000-730-250 - 2000 ton (N1) Nominal press force: 2000 ton Energy at 15 spm: 630 kJ Energy at 28 spm: 390 kJ Strokes per minute - full-revolution mode: 3–28 - endulum mode (at max....
Europe
Transfer press Aida DSF-TE4-20000(2)-730-250 - 2000 ton
- Manufacturer: Aida
Transfer press Aida DSF-TE4-20000(2)-730-250 - 2000 ton Nominal press force: 20000 kN Energy at 15 spm: 630 kJ Energy at 28 spm: 390 kJ Strokes per minute - full-revolution mode: 3–28 - endulum mode (at max...
Europe
Progressive press AIDA 2000 ton type DSF-TE4-20000-730-250-N3
- Manufacturer: Aida
Progressive press AIDA 2000 ton type DSF-TE4-20000-730-250-N3 Table dimensions: 7300 × 2500 mm Distance between side columns (front–back opening): 3650 mm Main motor power: 2 × 750 kW Slide-adjustment motor p...
Europe
Transfer press Aida Rovetta S4-20000/5500x2500/LD-ET3 - 2000 ton
- Manufacturer: Aida
Manufacturer: Aida-Rovetta Model: S4-20000/5500x2500/LD-ET3 Nominal press force: 2000 ton SPM: 8-24 Nominal energy: 400 kJ Slide stroke: 700 mm Slide adjustment: 600 mm Open height: 1400 mm Clearance betw...
Europe
Transfer press Aida LD-ET3-S4-20000-5500x2500 N11 - 2000 ton
- Manufacturer: Aida
Lower slide table dimensions: 5500 × 2500 mm Height of slide/ram carriage: 600 mm Opening in uprights: 3100 mm Main motor power: 250 kW Cushion force: 1500 kN Cushion stroke: 250 mm Press weight approx.: 39...
Europe
Transfer press Aida Rovetta (LD-ET3) S4-20000-5500x2500 - 2000 ton
- Manufacturer: Aida
Type: LD-ET3-S4-20000-5500x2500-N2 Nominal press force: 2000 ton SPM: 8-24 Nominal energy: 400 kJ Slide stroke: 700 mm Slide adjustment: 600 mm Open height: 1400 mm Clearance between uprights: 5970 mm Tab...
Europe
1988 AIDA-BRUDERER BSTA25
- Manufacturer: Aida
- Model: BSTA 25
Roll Feeder Roll Feeder BBV-202/120 Current status: Repaired Repaired | Power: 25t | Stroke length: 13 - 38 mm | Spm: 100 - 1500 | Dh: 239 /ST13mm 226.5/ST38mm | Aj: 51mm | Bolstor: 530/530/85 | Slide...
Ibaraki, Japan
1989 AIDA-BRUDERER BSTA25
- Manufacturer: Aida
- Model: BSTA 25
Roll Feeder Roll Feeder BBV202/120 Current status: Not serviced No Repair | Power: 25t | Stroke length: 13 - 38 mm | Spm: 100 - 1500 | Dh: 239 /ST13mm 226.5/ST38mm | Aj: 51mm | Bolstor: 530/530/85 | S...
Ibaraki, Japan
1987 AIDA-BRUDERER BSTA25
- Manufacturer: Aida
- Model: BSTA 25
Roll Feeder Roll Feeder BBV202/120 Current status: Repaired Repaired | Power: 25t | Stroke length: 13 - 38 mm | Spm: 100 -1500 | Dh: 239 /ST13mm 226.5/ST38mm | Aj: 51mm | Bolstor: 530/530/85 | Slide: 43...
Ibaraki, Japan
1988 AIDA-BRUDERER BSTA25
- Manufacturer: Aida
- Model: BSTA 25
Roll Feeder Roll Feeder BBV202/60 Current status: Undeveloped NO Repair | Power: 25t | Stroke length: 32mm Fixed Fixed | Spm: 100 - 950 | Dh: 229.5mm | Aj: 51mm | Bolstor: 530/530/85 | Slide: 438/360 | Motor:...
Ibaraki, Japan
1984 AIDA-BRUDERER BSTA 50L
- Manufacturer: Aida
- Model: BSTA 50L
Feeder: Feeder Sankyo VG75 | Warehause: Ibaraki Prefecture | Current status: No Repair | Power: 50t | Stroke length: 16 - 51 mm | Spm: - 1120 | Dh: 276.5 - 294 mm | Aj: 64 mm | Bolstor: 940 / 650 | Slide: 810 / ...
Ibaraki, Japan
2015 AIDA L-40
- Manufacturer: Aida
Plate width 30-400 Plate thickness 1.3-3.2 Maximum coil mass 1200kg Maximum coil inner diameter Φ508mm Maximum coil outer diameter Φ1200mm If there is a discrepancy between the contents and the actual product, th...
Tatebayashi, Japan
1984 AIDA-ENGINEERING NC1-8(1)
- Manufacturer: Aida
- Model: NC1-8(1)
- Stroke length: 40 mm
Current status: Rpaired | Power: 80t | Stroke length: 40mm | Spm: 70 - 150 | Dh: 310mm | Aj: 80mm | Bolstor: 950 x 460 | Slide: 540 x 460 | Motor: 7.5kw | Oil cooling device: None
Ibaraki, Japan
1991 AIDA NC1-60(2)
- Manufacturer: Aida
- Model: NC1-60
- Stroke length: 160 mm
60t Stroke length 140 Stroke number 45-85 Die height 300 Slide adjustment amount 70 With light safety die cushion If there is any discrepancy between the contents and the actual product, the actual product will t...
Tatebayashi, Japan
Aida NC1-1100(2) Press
- Manufacturer: Aida
- Model: NC1-1100(2)
Good condition Aida NC1-1100(2) Presses available between 2004 and 2005 years. Located in USA and other countries. Click request price for more information.
USA