Used Allis-Chalmers Processing in USA

3" x 2" Allis Chalmers Pump, S/S, 15 HP

• Manufacturer: Allis-Chalmers

3" x 2" Allis Chalmers Pump, S/S, 15 HP Used 3" X 2" Allis Chalmers centrifugal pump, frame F4D1-391, stainless steel construction, 15 hp, 230/460 volt motor, serial #6311.

ALLIS CHALMERS 3.0" X 2"

• Manufacturer: Allis-Chalmers

Used 3" X 1.5" Allis Chalmers centrifugal pump. Frame F4D1-391. Stainless steel construction. With 15 HP motor.

183" FACE ALLIS CHALMERS DRYER CAN SECTION 100 PSI (38 DRYER CANS)

• Manufacturer: Allis-Chalmers

ALLIS CHALMERS 8X6X17 PUMP AND DRIVE 50HP

• Manufacturer: Allis-Chalmers

Used Pump, Used Drive Allis Chalmers 8x6x17 50hp pump and drive

ALLIS CHALMERS Lime Kiln Trunnion Roller #46236

• Manufacturer: Allis-Chalmers

ALLIS CHALMERS Lime Kiln Trunnion Roller, 26" Face, 16" Shaft Diameter, 84" Shaft Length, Unused Storeroom Spare

Allis-Chalmers Heavy Duty Rotary Kiln Roller Bearing #45806

• Manufacturer: Allis-Chalmers

Allis-Chalmers Heavy Duty Rotary Kiln Roller Bearing

Allis-Chalmers Heavy Duty Rotary Kiln Roller Bearing #45807

• Manufacturer: Allis-Chalmers

Allis-Chalmers Heavy Duty Rotary Kiln Roller Bearing

Allis-Chalmers 6 ft x 15 ft 2 Deck Incline Screen

• Manufacturer: Allis-Chalmers

Custom Feed Manifold for Slurry Custom Fines Tanks for Slurry Pump Hook Up

Allis Chalmers 8DB Vapor Recovery Compressor SN: 4002-78984-1

• Manufacturer: Allis-Chalmers

Hp: 50 | Rpm: 1775

Allis Chalmers 19L Rotary Vane Compressor SN: 4002-77287-1

• Manufacturer: Allis-Chalmers

Rpm: 640 | Part number: S-1101-440 | Max temp: 350 degrees F | Max psi: 50

Detroit Diesel DDFP-04AN 7003 / Allis Chalmers Centrifugal Fire Pump Model 8000 - SN: 791-90302-1-1

• Manufacturer: Allis-Chalmers
• Model: 8000

Detroit Diesel Engine Model: DDFP-04AN 7003 BHP: 117 HP @ 1760 RPM MFG: 09/1991 SN: 4A-285969 (Low Hours) Allis Chalmers Centrifugal Fire Pump Model: 8000 Size: 8 x 8 x 17F GPM: 1500 RPM: 1770 1 Stage ...

ALLIS CHALMERS 3.0" X 2"

• Manufacturer: Allis-Chalmers

Used Allis-Chalmers type PD stainless steel centrifugal pump. 3" X 2". 125 GPM. 1160 rpm. Impeller diameter 11-7/8".

Allis Chalmers Electric Motors

• Manufacturer: Allis-Chalmers

Rpm: 1180 | Hp: 1180 | Voltage: 4160 | Phase: 3 | Hz: 60 | S.f.: 1.15 | Type: M | Frame: Class F

Allis Chalmers Electric Motors

• Manufacturer: Allis-Chalmers

Hp: 1180 | Voltage: 4160 | Phase: 3 | Hz: 60 | S.f.: 1.15 | Type: M | Frame: Class F