Almac FP 20
- Manufacturer: Almac
The stretched curd is introduced in the hopper and by means of two counter-rotating augers is pushed towards the moulds mounted on the moulding head. During this way, pasta passes through an area equipped with a ...
San Cesario sul Panaro, Italy
Almac FPR 72
- Manufacturer: Almac
The stretched dough is introduced into the hopper and it is conveyed to the head by means of two counter-rotating augers, thus filling the moulding pipes according to the programmed volumetric adjusting. During t...
San Cesario sul Panaro, Italy
Almac FP 21
- Manufacturer: Almac
The stretched curd is introduced in the hopper and by means of one auger is pushed towards the moulds mounted on the moulding head. During this way, pasta passes through an area equipped with a heated double jack...
San Cesario sul Panaro, Italy
Almac FS 100/N
- Manufacturer: Almac
The machine can be fed either directly by a continuous cooker- stretcher or by other types of discontinuous mixing machines. Pasta filata is introduced into the hopper and by means of four counter-rotating screws...
San Cesario sul Panaro, Italy
Almac FP18S
- Manufacturer: Almac
The stretched curd is introduced in the hopper and by means of the augers, operated by a motovariator, it is transported towards the moulding section. At the augers outlet, dough arrives to the moulding head thro...
San Cesario sul Panaro, Italy
Almac FPR 72L
- Manufacturer: Almac
The stretched dough is introduced into the hopper and it is conveyed to the head by means of two counter-rotating augers, thus filling the moulding pipes according to the programmed volumetric adjusting. During t...
San Cesario sul Panaro, Italy
Almac FPR 72M
- Manufacturer: Almac
The stretched dough is introduced into the hopper and it is conveyed to the head by means of two counter-rotating augers, thus filling the moulding pipes according to the programmed volumetric adjusting. During t...
San Cesario sul Panaro, Italy
Almac FS 200/N
- Manufacturer: Almac
The moulding machine mod. FS 200/N has been designed for reaching outputs even of the 70% higher than in a 4-augers machine and this has been possible thanks to the following modifications: Moulding drum increasi...
San Cesario sul Panaro, Italy
Almac FS 50/N
- Manufacturer: Almac
The machine can be fed either directly by a continuous cooker- stretcher or by other types of discontinuous mixing machines. Pasta filata is introduced into the hopper and by means of two counter-rotating screws ...
San Cesario sul Panaro, Italy
Almac FPR 72M C.I.P.
- Manufacturer: Almac
The stretched dough is introduced into the hopper and it is conveyed to the head by means of two counter-rotating augers, thus filling the moulding pipes according to the programmed volumetric adjusting. During t...
San Cesario sul Panaro, Italy
Tip: Enter manufacturer, model or keyword