- Trusted Seller

2022 Roth MFM2S
- Manufacturer: Roth
Equipped With: Beckhoff Industrial PC Control System Quick Change Blade Design Automatic Pleating Height Adjustment Linear Top and Bottom Blade Automatic Platform Setting Change On the Go Top Gap – Bottom Gap Inp...
- Trusted Seller
1980 Morgan-Press G-100T
- Manufacturer: Morgan
- Model: G-100T
Morgan-Press G-100T Injection Molding Machine, 1980 1625 Watts
- Trusted Seller

Wabash PC50-2418-4TM
- Manufacturer: Wabash
Machine type: Process Equipment | Machine location: California | Stock #: 631604 | -compression tonnage: 50 Tons | -compression cyl.: 7×7 | -platens: 24″ x 18″ Electric Heated, 9600 watts | -motor hp: 3 HP | -el...

Tiger Depack HS-90 Depackager
- Manufacturer: Tiger Depack
The largest Tiger Depackager, the HS-90, is the secret ingredient that helps you turn food waste into profit by separating organic waste from inorganic packaging. The Tiger HS-90 can feed, separate, process, and ...
Avon, OHTiger Depack HS-55 Depackager
- Manufacturer: Tiger Depack
The Tiger HS-55 Depackager separates organic food waste from inorganic packaging and produces up to 99.6% contamination-free organics! The Tiger HS-55 can process bulk commercial food waste or pre-or post-consume...
Avon, OH- Trusted Seller

Graco L-S20 5 Gallon
- Manufacturer: Graco
Machine type: Process Equipment | Machine location: California | Stock #: 482427 | Material container volume: 5.3 gal | Maximum air inlet pressure: 125 psi | – maximum flow rate: 1.6 GPM | – min flow: 1.6 GPM | ...
- Trusted Seller

2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 669251 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller

2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 442663 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller

West Salem Machinery 4260S
- Manufacturer: West Salem Machinery
-300 HP -Direct Drive Motor with 60″ Wide VFD Panel -3HP HYD Power Pack -Top Loading Infeed Chute -42″ Rotor Diameter Drawing Available

Tiger Depack HS-30 Depackager
- Manufacturer: Tiger Depack
The Tiger HS-30 Depackager helps you recover food waste costs by separating organic waste from inorganic packaging and turning food waste into cash flow. In a small, stationary footprint, the Tiger HS-30 can feed...
Avon, OH- Trusted Seller
2021 Cryogenic Equipment & Service (CES) CES-LT-LIN-10ftx36in-HOTL
- Manufacturer: Cryogenic Equipment & Service (CES)
Equipment Overview This CES 10ft x 36in Cryogenic Tunnel Freezer, manufactured in 2021, is designed for high-volume, continuous cryogenic freezing using liquid nitrogen. It features all-stainless construction, to...
- Trusted Seller

Amtech ATC-4400
- Manufacturer: Amtech
Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 487859 | -motor: 50 HP | -cfm: 8000-12500 | -dust drum: 55 Gal | -electrical requirements: 280/460V, 3P, 60Hz | -dimensions: 82.5″ x 53...
- Trusted Seller

Dings Overbelt Magnet
30" wide by 5' long Dings Overbelt Magnet 30" Wide 5' Long Good rectifier Comes with the stand Buyer responsible to disassemble and transport Selling as-is where-is.
- Trusted Seller
Honeywell C7076A1007 Ultraviolet Flame Detector
- Manufacturer: Honeywell
“SHELF WEAR” Model number: C7076A1007 | Mpn: C7076A1007 | Shipping weight: 7 lbs | Shipping dimensions: 14 x 8 x 7 in | Additional notes: SHELF WEAR | Reference sku: 1701933
- Trusted Seller
Komax ST-40411B Stainless Static Mixer 4in X 10in X 10in
- Manufacturer: KOMAX
“New without Factory Packaging” Model number: ST-40411B | Mpn: ST-40411B | Shipping weight: 295 lbs | Shipping dimensions: 33 x 26 x 19 in | Reference sku: 1067743

Arburg 420 C Injection Molding
- Manufacturer: Arburg
- Model: 420 C
Good condition Arburg 420 C Injection Moldings available between 1996 and 2006 years. Located in Germany and other countries. Click request price for more information.
Germany

