- Trusted Seller
2000 Amada TPL 80SI Single Crank Gap Frame Press - LMC #51544
- Manufacturer: Amada
- Model: TPL-80
Year Built - 2000 SPECIFICATIONS: EQUIPPED WITH: Link Drive Operator T-Stand w/Palm Buttons Air Counterbalance Wet Type Clutch & Brake Motorzied Shut Height Adjustment T-Slotted Bolster & Slide Leveling Pads *Pre...
Lincolnshire, IL - Trusted Seller
Amada HFE 1000-35 Press Brake 112 Ton x 10' 122" Hydraulic CNC 200mm Stroke 460V
- Manufacturer: Amada
Used and removed from a working environment. We were unable to make the unit operate and therefore could not test it at our location. This unit is setup with safety curtains and programing. Can be inspected at o...
- Trusted Seller
Amada RG-50 Brake Press
- Manufacturer: Amada
- Model: RG-50
- Stroke length: 150 mm
- Throat depth: 315 mm
Amada RG-50 Brake Press Amada RG-50 Brake Press Serial Number 505423 Year of Manufacture 1985 Hours of Use 1467 Comes with the crate full of dyes. The weight of the creative dies is over 1500 pounds. This press i...
- Trusted Seller
Used Amada RG-25 Press Brake
- Manufacturer: Amada
- Model: RG-25
- Stroke length: 100 mm
- Daylight: 350.27 mm
Net Before Ship Subject Prior to Sale 25 Ton Manual Backgauge Full Length Foot Bar Ram Stroke Adjustment Speed Control Lever Tonnage Control SPECIFICATIONS AND CONDITION ARE CORRECT TO THE BEST OF OUR KNOWLEDGE A...
- Trusted Seller
AMADA GPN 425
- Manufacturer: Amada
- Model: GPN-425
- Maximum thickness: 4 mm
Control: Amada | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Sheet width: 2500mm | Plate thickness: 4mm | Weight of the machine approx.: 5000kg | Dimensions of the machine appro...
Günzburg, Germany - Trusted Seller
1997 AMADA GPX 840
- Manufacturer: Amada
- Model: GPX-840
- Maximum thickness: 8 mm
- Shearing length: 840 mm
Control: CNC - | Storage location: Location | Freight basis: Delivery ex location. | Sheet width: 4050mm | Plate thickness: 8mm | Cutting angle: 2 - 10° | Cutting speed: 0,053m/s | Table length: 710mm | Machine ...
Günzburg, Germany 
2008 AMADA HFA 530 CNC #1077-03778
- Manufacturer: Amada
- Model: HFA-530CNC
- Power requirement: 13 kW
Bandsägevollautomat The technical data are manufacturer or operator specifications and are therefore non-binding for us. We reserve the right to make a mid- sale; only our terms and conditions apply. About us m...
Dorsten, Germany- Trusted Seller
1999 AMADA-PROMECAM HFBO 3204
- Manufacturer: Amada
- Stroke length: 350 mm
- Power requirement: 32 kW
Control: CNC - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Pressure: 320t | Chamfer lenght: 4100mm | Stroke: 350mm | Total power requirement: 32kW | Weight of the machine appro...
Günzburg, Germany 
2007 AMADA HFP 220.3L
- Manufacturer: Amada
- Model: HFP-2203L
- Stroke length: 350 mm
- Throat depth: 420 mm
Ausstattung: - CNC Steuerung AMNC - 7 Achsen - Lichtschranke vor der Maschine - Fußschalter
Monheim am Rhein, Germany- Trusted Seller
2026 AMADA Chip Breaker M32 15' x 1,1/2"
- Manufacturer: Amada
Amada Chip breaker, HSS Bi-Metal Blade M 42 Cobalt teeth, HSS Blade with special tooth design that reduces cutting resistance while Maintaining Penetration Fits Amada HA and HFA 400-W models spend 800.00 or more ...
Elk Grove Village, IL - Trusted Seller
1993 AMADA RG35S
- Manufacturer: Amada
- Model: RG-35S
- Capacity: 35,000 kg
- Stroke length: 80 mm
AMADA RG35S (YR 1993) USED PRESS BRAKE MACHINE FOR SALE Asset Info: All freight is shipped Ex Works/Ex-Source/Ex-Site. All freight, proper preparation for shipping and rigging, insurance or any additional charges...
Hong Kong - Trusted Seller
1990 AMADA F-BEST 2004
- Manufacturer: Amada
- Model: F-BEST
- Capacity: 200,000 kg
- Stroke length: 200 mm
AMADA F-BEST 2004 (YR 1990) USED PRESS BRAKE MACHINE FOR SALE Asset Info: All freight is shipped Ex Works/Ex-Source/Ex-Site. All freight, proper preparation for shipping and rigging, insurance or any additional c...
South East Asia - Trusted Seller
1993 AMADA F⍺B-1253R
- Manufacturer: Amada
AMADA F⍺B-1253R (YR 1993) Asset Info: All freight is shipped Ex Works/Ex-Source/Ex-Site. All freight, proper preparation for shipping and rigging, insurance or any additional charges related to this project are t...
South East Asia - Trusted Seller
1991 AMADA DCT 3065
- Manufacturer: Amada
- Model: DCT-3065
AMADA DCT 3065 Used Roller Guide Mechanical Shearing Machine For Sale Asset Info: All freight is shipped Ex Works/Ex-Source/Ex-Site. All freight, proper preparation for shipping and rigging, insurance or any addi...
South East Asia - Trusted Seller
1991 AMADA ARIES 245
- Manufacturer: Amada
- Model: ARIES-245
- Maximum thickness: 4 mm
AMADA ARIES 245 (YR 1991) USED CNC Turret Punch Press Machine Asset Info: All freight is shipped Ex Works/Ex-Source/Ex-Site. All freight, proper preparation for shipping and rigging, insurance or any additional c...
South East Asia
Tip: Enter manufacturer, model or keyword
