Processing » Agitators, Blenders, Mixers » Agitators » Texas

Building Filters

Related Events

Live Now

Rex Forge – Plant Closure Auction

by Capital Recovery Group

Online
Ends Oct 8th, 15:00 CDT
View event
97

Used Agitators in Texas, USA

  • LIGHTNIN AGITATOR (CLAMP ON)

    LIGHTNIN AGITATOR (CLAMP ON)

    • used

    • Manufacturer: Lightnin

    ONE (1) SURPLUS AGITATOR; CLAMP ON TYPE; MODEL: EV1P26; SN: 167388; HP: 25; NO INFO ON FILE.

    Houston, TX
  • AGITATOR, 25HP, MFD.LOTUS, MDL.TL3-18573CC, YR

    AGITATOR, 25HP, MFD.LOTUS, MDL.TL3-18573CC, YR 2007, CS, 360RPM, SIDE ENTRY [Qty.2]

    • used

    • Manufacturer: Lotus

    AGITATOR, 25HP, LOTUS, TL3-18573CC, CS, 360RPM, 5-1, SIDE ENTRY. QTY.2 [#1272359] 16'' Flange mount, horizontal, gland seal, belt drive motor.

    Alvin, TX
  • PROQUIP, INC. AGITATOR

    PROQUIP, INC. AGITATOR

    • used

    • Manufacturer: PROQUIP, INC.

    ONE (1) SURPLUS AGITATOR; MFG. BY PROQUIP; MODEL: 33JAS20M; RATIO 20:1; SN: 5993; DRIVEN BY 1/3 HP MOTOR; 230/460 VOTLS; US ELECTRIC; 1745 RPM IN; 87 RPM OUT; CARBON STEEL SHAFT; -1/2" DIA. X 32" LENGTH.

    Houston, TX
  • CHEMINEER AGITATOR DRIVE

    CHEMINEER AGITATOR DRIVE

    • used

    • Manufacturer: Chemineer

    ONE (1) SURPLUS AGITATOR DRIVE WITH SHAFT. TOP ENTRY; MFG: CHEMINEER; MODEL: 6HTH-20; SN: 1-76564-2; HP: 20/10; RPM: 1200/600 RPM; IMPELLER RPM: 37/18.5 RPM; W/WESTINGHOUSE TWO SPEED MOTR; 20 HP; 1155 RPM; 10 HP;...

    Houston, TX
  • PROQUIP, INC. AGITATOR

    PROQUIP, INC. AGITATOR

    • used

    • Manufacturer: PROQUIP, INC.

    ONE (1) SURPLUS AGITATOR; MFG. BY PROQUIP; MODEL: 33JAS20M; RATIO 20:1; SN: 5994; DRIVEN BY 1/3 HP MOTOR; 230/460 VOTLS; US ELECTRIC; 1745 RPM IN; 87 RPM OUT; CARBON STEEL SHAFT; -1/2" DIA. X 32" LENGTH.

    Houston, TX
  • PROQUIP, INC. AGITATOR

    PROQUIP, INC. AGITATOR

    • used

    • Manufacturer: PROQUIP, INC.

    ONE (1) SURPLUS AGITATOR; MFG. BY PROQUIP; MODEL: 33JAS20M; RATIO 20:1; SN: 5995; DRIVEN BY 1/3 HP MOTOR; 230/460 VOTLS; US ELECTRIC; 1745 RPM IN; 87 RPM OUT; CARBON STEEL SHAFT; -1/2" DIA. X 32" LENGTH.

    Houston, TX
  • NEPTUNE LERSON AGITATOR (CLAMP ON)

    NEPTUNE LERSON AGITATOR (CLAMP ON)

    • used

    • Manufacturer: NEPTUNE LERSON

    ONE (1) SURPLUS AGITATOR; MFG: NEPTUNE LERSON; CLAMP ON TYPE; 1/3 HP MOTOR; 1725/1425 RPM; 230/460 VOLTS; FR: C56C; NO INFO ON FILE

    Houston, TX
  • MIX TANK, 2000GAL., HAST.C22, ATM#,

    MIX TANK, 2000GAL., HAST.C22, ATM#, 6' X 9', VERTICAL, 3HP AGITATOR

    • used

    • Manufacturer: Addison

    MIX TANK, 2000GAL., HAST.C22, ATM#, 6' X 9', VERTICAL, 3HP AGITATOR. Pressure-shell 10''WC @ 250deg F. Dished heads, lug supported.

    Houston, TX
  • CHEMINEER AGITATOR GEAR DRIVE

    CHEMINEER AGITATOR GEAR DRIVE

    • used

    • Manufacturer: Chemineer

    ONE (1) USED CHEMINEER AGITATOR GEAR DRIVE; MODEL 9 HTD-75; SN: 503008-7; POWER: 75 HP; MTR. RPM: 1200; OUTPUT RPM: 37; MOTOR: 75 HP RELIANCE; FRAME: 405TS; RPM: 1185; AMPS: 86.9; HERTZ: 60; PHASE: 3

    Houston, TX
  • CHEMINEER AGITATOR GEAR DRIVE

    CHEMINEER AGITATOR GEAR DRIVE

    • used

    • Manufacturer: Chemineer

    ONE (1) USED CHEMINEER AGITATOR GEAR DRIVE; MODEL 9 HTD-75; SN: 503008-8; POWER: 75 HP; MTR. RPM: 1200; OUTPUT RPM: 37; MOTOR: 75 HP RELIANCE; FRAME: 405TS; RPM: 1185; AMPS: 86.9; HERTZ: 60; PHASE: 3

    Houston, TX
  • PFAUDLER AGITATOR GEAR DRIVE

    PFAUDLER AGITATOR GEAR DRIVE

    • used

    • Manufacturer: Pfaudler

    ONE (1) SURPLUS GEAR DRIVE; MFG: PFAUDLER; MODEL: FMDWV-50500-BJD; SN: 5-00673-P; SIZE: 5.0; RPM: 176; O.A. RATIO: 10.1; NO MOTOR; BELT DRIVE.

    Houston, TX
  • PFAUDLER AGITATOR GEAR DRIVE

    PFAUDLER AGITATOR GEAR DRIVE

    • used

    • Manufacturer: Pfaudler

    ONE (1) SURPLUS GEAR DRIVE; MFG: PFAUDLER; MODEL: FMDWV-50510-EJD; SN: 86062847-001; SIZE: 5.0; O.A. RATIO: 15-1; RPM: 117; RIGHT ANGLE DRIVE; SHAFT STUB: 3.5" X 16"; STAINLESS STEEL; MOTOR: PACEMAKER; HP: 15; VO...

    Houston, TX
  • ACRISON AUGER/AGITATOR BIN FEEDER

    ACRISON AUGER/AGITATOR BIN FEEDER

    • used

    • Manufacturer: Acrison

    ONE (1) SURPLUS ACRISON MULTIPLE AUGER/AGITATOR BIN DISCHARGE FEEDER. MODEL: BDEF4-N; SN: 93323-07;RATED FOR APPROXIMATELY 115--486 CU FT/HR. DUAL SHAFTS WITH 1-1/2" DIA. X 7" BARS. DISCHARGE SCREW AUGER WITH 4" ...

    Houston, TX
  • TANK-VESSEL, 3200 GAL, 316LSS, 802#,

    TANK-VESSEL, 3200 GAL, 316LSS, 802#, 4'6''DIA X 26', VERTICAL, 10HP TOP ENTRY AGITATOR

    • used

    • Manufacturer: TANK-VESSEL,

    TANK-VESSEL, 3200 GAL, 316LSS, 802#, 4'6''DIA X 26', VERTICAL, 10HP TOP ENTRY AGITATOR [#1272850] Mfd. Ebnerfab, Yr. 2011. 316LSS construction. Size 4'6''dia x 26' s-s. MAWP 802# @ 600Deg F. ASME. N.Bd. Vertic...

    Houston, TX
  • CHEMINEER AGITATOR (UNUSED)

    CHEMINEER AGITATOR (UNUSED)

    • used

    • Manufacturer: Chemineer

    ONE(1) UNUSED SURPLUS CHEMINEER AGITATOR; MODEL: 23 GTD-25; S/N: 582918-1; MTR. RPM: 1200; OUTPUT RPM: 84; MOTOR (ITEM # 9825-3733): SIEMENS; 25 H.P.; TYPE: SD100; FRAME: 324 TCV; VOLTS: 460; PHA...

    Houston, TX
34567

Overview

Agitators are essential devices used to stir or mix fluids in various industrial processes. They are commonly found in industries such as chemical, food and beverage, pharmaceuticals, and wastewater treatment. Agitators ensure uniform mixing, improve chemical reactions, and maintain product consistency. They come in different types, including top-entry, side-entry, and bottom-entry agitators, each suited for specific applications.

FAQ

What factors should I consider when purchasing an agitator?

Consider the type of fluid, the viscosity, the required mixing intensity, and the specific application. It's also important to assess the agitator's material compatibility with the fluids being mixed.

How can I ensure the agitator is shipped safely?

Choose a shipping provider experienced in handling industrial equipment. Ensure the agitator is properly packaged and secured to prevent any damage during transit.

What is the typical maintenance schedule for an agitator?

Regular maintenance includes inspecting seals and bearings, checking for wear or damage, and ensuring that all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance procedures.