Used Reactors in Texas, USA

VESSELS/REACTORS 99640
- used
- Manufacturer: PRENTEX
- Alloy: S
- Shell Material: AL6XN
CARBON ABSORBER BED; MFG. BY PRENTEX IN 1995; PART OF CARBON ABSORBER SKID; MATERIAL AL6XN (STAINLESS); NOZZLES: TOP 2"; SIDE 1.5", 3", 6"; BOTTOM 1" CBO; PREVIOUSLY UTILIZED IN VITAMIN C PRODUCTION;
Cleveland, TX
VESSELS/REACTORS 99639
- used
- Manufacturer: PRENTEX
- Alloy: S
- Shell Material: AL6XN
CARBON ABSORBER BED; MFG. BY PRENTEX IN 1995; PART OF CARBON ABSORBER SKID; MATERIAL AL6XN (STAINLESS); NOZZLES: TOP 2"; SIDE 1.5", 3", 6"; BOTTOM 1" CBO; PREVIOUSLY UTILIZED IN VITAMIN C PRODUCTION;
Cleveland, TX
VESSELS/REACTORS 95845
- used
- Manufacturer: WYATT
- Alloy: S
- Shell Material: 347SS
MFG. BY WYATT; ON 4 LEGS; WITH (3) VACUUM RINGS; Qty: 1 | Alloy: S | Gallons: 4800 | Dia/width (ft'in"): 8'0" | Length (ft'in"): 11'0" | Shell psi: 25 | Full vac. y/n: Y | Shell temp deg. f: 400 | V/h: V | Shell ...
Cleveland, TX
VESSELS/REACTORS 88324
- used
- Manufacturer: CAMDEN ALLOY
- Alloy: S
- Shell Material: 304SS
HOTWELL TANK; MFG. BY CAMDEN ALLOY IN 1980; (4) LEG SUPPORTS;
Cleveland, TX
VESSELS/REACTORS 88295
- used
- Manufacturer: BAEUERLE & MORRIS
- Alloy: S
- Shell Material: 316SS
WATER RECEIVER; MFG. BY BAEUERLE & MORRIS IN 1981; LUG SUPPORTS; 3'6" X 3'6" BOTTOM BOOT;
Cleveland, TX
VESSELS/REACTORS 88293
- used
- Manufacturer: BAEUERLE & MORRIS
- Alloy: S
- Shell Material: 316SS
WATER RECEIVER; MFG. BY BAEUERLE & MORRIS IN 1981; WITH 3'6" X 3'6" BOTTOM BOOT; LUG SUPPORTS;
Cleveland, TX
VESSELS/REACTORS 46059
- used
- Alloy: S
- Shell Material: 304L
HOPPER; CONE SHAPED; QUICK-OPEN TOP; Qty: 1 | Alloy: S | Gallons: 94 | Diameter (ft'in"): 2'0" | Length (ft'in"): 4'0" | Shell psi: 20 | Full vac. y/n: N | Shell temp deg. f: 325 | V/h: V | Shell material: 304L |...
Cleveland, TX
VESSELS/REACTORS 99157
- used
- Manufacturer: ALABAMA HEAT EXCHANGER
- Alloy: S
- Shell Material: 316LSS
MIBK STRIPPER SUMP; MFG. BY ALABAMA HEAT EXCHANGER IN 1996; SADDLE SUPPORTS; NOZZLES: HEAD 6", (2)2"; SHELL 3", (5)2";
Cleveland, TX
VESSELS/REACTORS 99112
- used
- Manufacturer: PHILLIPS STEEL
- Alloy: S
- Shell Material: 304LSS
TOLUENE WASH SEPARATOR; MFG. BY PHILLIPS STEEL IN 1987; SADDLES SUPPORT;
Cleveland, TX
VESSELS/REACTORS 93574
- used
- Manufacturer: INDUSTRIAL ALLOY
- Alloy: S
- Shell Material: 304LSS
WASH RECEIVER TANK; MFG. BY INDUSTRIAL ALLOY; SADDLE SUPPORTS; NOTE: RE-RATED TO 15 PSI @ 200 DEG. F.;
Cleveland, TX
VESSELS/REACTORS 88419
- used
- Alloy: S
- Shell Material: 304LSS
WITH SADDLES; Qty: 1 | Alloy: S | Gallons: 250 | Dia/width (ft'in"): 2'6" | Length (ft'in"): 5'0" | Shell psi: 15 | Full vac. y/n: N | Shell temp deg. f: 401 | V/h: H | Shell material: 304LSS | Agitated y/n: N | ...
Cleveland, TX
VESSELS/REACTORS 86236
- used
- Manufacturer: MITTERNIGHT
- Alloy: S
- Shell Material: 316SS
MFG. BY MITTERNIGHT; (2) SADDLE SUPPORTS; 16'2" O.A.L.;
Cleveland, TX
VESSELS/REACTORS 86230
- used
- Manufacturer: CONTINENTAL FABRICATORS
- Alloy: S
- Shell Material: 316SS
EAST NCB PROCESS WASTE WATER TANK; MFG. BY CONTINENTAL FABRICATORS; 40FV @ -15 TO 250 DEG. F.; SADDLES; BUILT IN 1989
Cleveland, TX
VESSELS/REACTORS 86274
- used
- Manufacturer: DEDIETRICH
- Alloy: G
- Shell Material: 3009 GLASS
MFG. BY DEDIETRICH IN 1990; REPAIRED IN 1995; SADDLE LEGS; FLANGED ONE END
Cleveland, TX
VESSELS/REACTORS 82937
- used
- Manufacturer: PFAUDLER
- Alloy: G
- Shell Material: CS/GLASS LINED
MFG. BY PFAUDLER; ON LEGS; Qty: 1 | Alloy: G | Gallons: 500 | Dia/width (ft'in"): 4'6" | Length (ft'in"): 4'8" | Shell psi: 25 | V/h: V | Shell material: CS/GLASS LINED | Agitated y/n: N | Top head: FLANGED
Cleveland, TX