- Trusted Seller

Anritsu Metal Detector Conveyor M6
- Manufacturer: Anritsu
- Model: M6
Anritsu, Model M6, automatic, inline, metal detector with number of product per minute – depending on materials and application. Working Aperture: 7" in Height; 11½" in Width. Equipped with 10" wide x 31" long pr...
Carol Stream, IL - Trusted Seller

Anritsu Metal Detector X-Ray KXS7534AVCLE
- Manufacturer: Anritsu
Anritsu, model KXS7534AVCLE, sanitary, stainless steel, X-Ray inspection system with number of product per minute – depending on materials and application. Equipped with 16½" wide x 47" conveyor belt with speed u...
Carol Stream, IL 
Anritsu KD7405AW X-Ray Metal Detector – High-Speed Inspection System
- Manufacturer: Anritsu
- Model: KD7405AW
72972006 Used Anritsu X-Ray Metal Detector, Model KD7405AW. Max product weight 5Kg (60m/min). Max product size: 240mm (width) x 120MM (height). Temperature range 0 to 35 degrees C. Serial# 4600035213. 1/60/120 Vo...
Belvidere, IL
Anritsu KD7405AW X-Ray Metal Detector – High-Speed Contaminant Detection
- Manufacturer: Anritsu
- Model: KD7405AW
72972005 Used Anritsu Model KD7405AW X-Ray Metal Detector. Max product weight 5Kg (60/m/min). Max product size: 240mm (width) x 120MM (height). Temperature 0 to 35 degrees C. Serial# 4600035207. 1/60/120v ...
Belvidere, IL- Trusted Seller
Anritsu PIPELINE X-RAY
- Manufacturer: Anritsu
ANRITSU PIPELINE X-RAY MACHINE. stainless steel construction, Temp: 0 degrees to 40 degrees, Current: 7, Power consumption: 210 W max, Air Source: 0.5 to 0.7 mpa, Pass Height: 35 mm, Max Product weight: 180L/min,...
Skokie, IL 
Anritsu Corporation Check Weigher and Metal Detector
- Manufacturer: Anritsu
-Check weigher Model: KWS6366BW3E -Serial number: 4600204847 -Capacity size: 1200 G -Volts: 115 -Hz: 60 -Amps: 2 -Metal Detector model: KDIII3BW -Serial number: 4200002459 -Vertical clearance: 3" -Horizontal clea...
$4,751 USDBrant, Canada- Trusted Seller
Anritsu M6H / KDS4510ABW
- Manufacturer: Anritsu
All stainless steel metal detector with an opening of 3.75" tall x 17.75" wide. The conveyor is 31.5" long x 13.75" wide. The conveyor speed along with the other parameters are controlled by the HMI. It also has ...
Barrie, Canada - Trusted Seller

Anritsu KD74 Series Belt X-Ray
- Manufacturer: Anritsu
Anritsu KD7416DRWZ belt x-ray Manufacturer: Anritsu Model: KD7416DRWZ Built: 2019 Additional Information: From the manufacturer, this is a highly versatile system capable of a wide range of packaged products. Thi...
Portland, OR - Trusted Seller

Detector, X-Ray, Anritsu, Model KD7405AW, 9.5" x 4.25" #S745241
- Manufacturer: Anritsu
- Model: KD7405AW
Anritsu Model KD7405AW X-Ray Metal Detector. Max product weight 5Kg (60/m/min). Max product size: 240mm (width) x 120MM (height). Temperature 0 to 35 degrees C. Serial# 4600035207. Packaged products are fed by be...
Brisbane, CA - Trusted Seller

Detector, X-Ray, Anritsu, Model KD7405AW, 9.5" x 4.25" #S745240
- Manufacturer: Anritsu
- Model: KD7405AW
Anritsu Model KD7405AW X-Ray Metal Detector. Max product weight 5Kg (60/m/min). Max product size: 240mm (width) x 120MM (height). Temperature 0 to 35 degrees C. Serial# 4600035207. Packaged products are fed by be...
Brisbane, CA - Trusted Seller
Anritsu Elevated Metal Detector
- Manufacturer: Anritsu
Anritsu Elevated Metal Detector Air blast reject Length (mm): 2500 | Width (mm): 1100 | Height (mm): 1100 | Belt size (mm): 350 x 2500 | Aperture (mm): 450 x 950
Bury St Edmunds, United Kingdom - Trusted Seller

2012 Anritsu Combi Checkweger KW5417BP5D
- Manufacturer: Anritsu
Weighing table 500m Metal detector throughput 130x400mm Bandwidth 350mm
Kapelle, Netherlands 
2002 Anritsu KD 7203 AW
- Manufacturer: Anritsu
- Model: KD7203AW
Weighing weight: Up to 5 Kg Belt width 270 mm (tunnel size 315) × gate height 90 mm Approximately 9,000 hours after using irradiation equipment (from owners). 2011 version upgrade (to 24.21) With instructions
Hiroshima, Japan- Trusted Seller

Anritsu Metal Detector with Check Weigher
- Manufacturer: Anritsu
Metal Detector with Check Weigher, “Anritsu” SVF Series model KW5205BF3D, weigh range: 6 to 600g, product size: 20 to 160mm wide x 58 to 230mm long x 5 to 80 mm high, includes with rejector, stainless steel conv...
Sydney, Australia ![2015 Anritsu Corporation [Metal Detector]](https://i.machinio.com/thumb/1cy00bu/88592/ddf6/2015-anritsu-corporation-metal-detector-kds8113bw-rejector-kw4103aw.png)
2015 Anritsu Corporation [Metal Detector] KDS8113BW [Rejector] KW4103AW
- Manufacturer: Anritsu
Weight of gold inspection: 102 (㎏) Passing height: 75 (mm) Belt size: Width 230 x Length 800, Belt height 840 (mm) Rejector belt size: Width 220 x Length 700 (mm) Test piece: Feφ0.8, SUSφ1.0 (test piece not inclu...
Toyonaka, Japan

