Used Processing in Belgium

2001 Core sand mixing plant LAEMPE SM5; 5,5t/h

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 2300mm; Width: 1200mm; Height: 2500mm Mixing bucket: Ø380mm; height: 600mm = ±65l With resin and hardener dosing Horizontal mixing paddleHorizontal cleaning paddleMotor power: 7,5KW Without el...

NEW gassing units LÜBER, type LW-FDA 825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

2007 Dedusting filter HPS 5000m³/h

• Manufacturer: HPS

Dimensions: Length: 1200mm; Width: 1000mm; Height: 2670mm 4kW; 400V; 8,1A; 50Hz 4 cartridges Without dust container Pneumatic cleaning Suction left and right possible

Core sand mixer 120l

Dimensions: Length: 750mm; Width: 800mm; Height: 1350mm Internal dimensions: Ø620mm; depth: 470mm With pneumatic outlet flap Without protective grid on the mixing bucket With on/off switch

Core shooter RÖPER H25 completely hydraulic

• Manufacturer: Laempe / Röperwerk

Shot volume 25l Dimensions (without cabin): Width: 2560mm; Depth: 2000mm; Height: 2800mm With cabin Hydraulic table With hydraulic side clamping With core extraction slide and ejector With hydraulic unit 30bar; 4...

Moulding machine OSBORN 719RF

• Manufacturer: OSBORN

Type 719RF max width 950mm, clamping stroke 183mm demoulding stroke 330 ;

Refractory sprayer VELCO-ROTAMAT

• Manufacturer: Velco Rotamat

Gear motor 4kW; 5,5PS; 50Hz; 8,6A; 380V Water inlet 1" 1/4 - without hose, flow rate 1.1 m³/h With hose ±4m With compressed air supply hose With vibrator on funnel

2001 Electric treatment furnace PADELTHERM 650°C gas

• Manufacturer: Padelttherm

Heated with natural gas CE mark on the oven Weight: 5100 kg | Electrical voltage: 400V /50Hz/ 107,5A | Control voltage: 230V | Power: 72kW | Max temperature: 650°C

Gravity die casting machine, Hydraulic 600×400mm

Dimensions: Length: 2500mm; Width: 750mm; Height: 1500mm 3 guides Without hydraulic unit

Hanger type shot blast cabin SIAPRO

• Manufacturer: SIAPRO

Door dimensions: Height: 1600mm; Width: 1200mm 22kW; 400V; 50Hz With 2 turbines (7,5kW) Y-rails With 2 hooks With small filter With grid reclaiming by DYN-air With control Mitsubishi

Teapot ladle 2t SENSENBRENNER

• Manufacturer: Senssenbrenner

Dimensions: Length: 1550mm; Width: 1600mm; Height: 1800mm Effective dimensions: Ø850mm; Depth: 860mm With planetary gear With teapot spout With crane eye With heat protection

Manipulator Mecana

• Manufacturer: Mecana CH.

Dimensions: length: 1000mm; width: 1200mm; height: 1200mm 230V 380 V., three phase Rotatable on 2 axes (vertical and 45°) With 2 pedals

Pneumatic Hammer CLANSMAN CC100

• Manufacturer: CLANSMAN DYNAMICS

Air capacity, 40 l / 6 bar / shot Year: 2004 | Weight: 400 kg | Dimensions: length 1300mm, width 700mm, height 1000mm

2010 Manipulator CLANSMAN C2010 E5

Dimensions: length ± 4500mm, width ± 2300mm, height ± 3800mm With pincer, opening 50mm ) 650mm

Moudling box, 3000mm x 3000mm x h. 400mm

With 4 crane eyes Weight: 1540kg