Used Processing in Missouri, USA

1984 Cherry Burrell 36-144

• Manufacturer: Cherry Burrell

Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Serial no. A4156. Scraped surface area 106 sq ft. Model 36-144. All contact surfaces are 304 stainless steel. Has 2 se...

Dust Collector, Cartridge, CECOaire, 23,500CFM #5991054

• Manufacturer: CECOaire

Used CECOaire system airflow of 23,500 cubic feet per minute (CFM) 75/100 horsepower motor. System includes all components, electric boxes, wiring, water suppressor equipment, and complete ductwork. Less than 30 ...

2023 Econoline 101701G-A 60"x48" Abrasive Blast Cabinet

• Manufacturer: Econoline

Air Regulator & Gauge Safety Switch Dust Collector Foot Pedal Nozzle Safety Gloves

Rotary Kiln, 5.5' X 32-1/2', Maxon Burner, Feeder - #4673732

• Manufacturer: Maxon
• Model: 400

Rotary Kiln, 5-1/2' diameter X 32 1/2 feet long shell. Product is fed by 7' long screw feeder and discharge is controlled by a Rotary Air Lock valve. Includes drum drive with motor and gear reducer. Equipped with...

Peerless 36 inch Twin Shaft Pugmill Plant

• Manufacturer: Peerless

Peerless 36" Twin Shaft Portable Pugmill Plant Detroit Diesel Engine Bituminous Pump For Making Cold Mix Asphalt Water Pump To Do Pug Mix (Have To Swap Out) Mounted On Single Axle Dual Tire Carriage W/Eye Hitch F...

Mixer, Ribbon, 600 CF, Carbon Steel, Double Ribbon, #5991223

600 cu. ft Double Ribbon Mixer, constructed of carbon steel, featuring an end discharge design. Powered by an approximately 50 HP motor, the drive system includes a gearbox with a chain and sprocket assembly. Pre...

Unknown Manufacturer: Used 20' Hockey Stick Infeed Conveyor

• Manufacturer: Unknown Manufacturer: Used

This used 20' Hockey Stick Infeed Conveyor, available from an unknown manufacturer, presents a solid option for your recycling or trash handling needs. It measures 20 feet in overall length with a horizontal sect...

Dust Collector, Stationary, Spencer Industravac, Model SD-325B #5318614

• Manufacturer: Spencer Industravac

Spencer Industravac Central Vacuum Unit, Model SD-325B. Delivers heavy-duty performance with a 25 HP motor in a stationary design.

SHOPBUILT 30″ X 80′ TRUSS CONVEYOR 162012

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 80′ TRUSS CONVEYOR Shopbuilt 30″x80′ truss conveyor with 3″x5″ main cord & 3″x3″x1/4″ lattice. Has a 24″ 2-ply belt, gear box, but no motor. Wing tip tail pulley & lagged head pulley. 35 degree se...

SHOPBUILT 30″ X 16′ CHANNEL CONVEYOR 163074

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 16′ CHANNEL CONVEYOR Shopbuilt 30″x16′ channel conveyor with 35 degree idlers, 5″ cans, & 2-ply belt (good). Has gearbox, but no motor. Good condition.

2008 FREIGHTLINER M2106 6X4 CONVEYOR TRUCK

• Manufacturer: Freightliner

Showing: 228,413 Miles; 15,026 Hours. NON-RUNNER, FULL OPERATIONS NOT TESTED. ENGINE CRANKS BUT NO START, OIL LEAKS FROM THE REAR ENGINE SEAL AND THE OIL PAN, RIGHT REAR TURN SIGNAL AND BED CLEARANCE LIGHTS NOT F...

3 point 50 gallon sprayer

As Is, Where Is Located at: Lost Valley Hatchery 28232 Hatchery Ave. Warsaw, Mo. 65355 Contact: Joe Valentine Missouri Department of Conservation Lost Valley Hatchery 28232 Hatchery Ave. Warsaw, Mo. 65355 Ph 660-...

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) 162011

• Manufacturer: Shopbuilt

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) Shopbuilt 24″x80′ truss conveyor (24″ deep truss) with 3x3x1/4 main cord & 2x2x1/4 lattice. 35 degree sealed idlers & 2 ply belt (good). Has gearbox, but no mot...

TAMROCK ZOOM TRACK HYDRAULIC DRILL 510118

• Manufacturer: Tamrock

Tamrock Zoom track model 600. Catt 3116 engine with approx 1000 hours. Unit has 8915 hours, drifter 7275 hours. Needs new seat and to be cleaned up. Drill runs and was working when parked.

2004 FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. 510140

• Manufacturer: Furukawa

(2004) FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. (2004) Furukawa 1200ED with 12,764 frame hours (Re-man engine @6874 hrs) and 6046 impact hrs (resealed @ 5724hrs). 5.9 Cummins engin...