Used Gearboxes & Transmissions in Singapore

Aiko #ZD02101 1 Ton High Transmission Jack

• new

• Manufacturer: Aiko

Stroke (mm): Height (mm): Capacity (ton): 1 | 1st stage: 465 | 2nd stage: 465 | Min: 845 | Max: 1770 | G.w. (kg): 87 | N.w. (kg): 80 | Package size (mm): 550*370*1000

Aiko 400 Bar Diesel Powered High Pressure Washer With Gear Box

• new

• Manufacturer: Aiko

Max pressure: 5800psi/400bar | Max flow: 6.6gpm/25lpm | Pump model: DBF-1521G4-S, Gearbox reduction | Power and type: 997cc. 2 cylinder diesel engine, air cooling | Start type: Key start | Battery: 12V. 20A/H | ...

Aiko 345 Bar Diesel Powered High Pressure Washer With Gear Box

• new

• Manufacturer: Aiko

Max pressure: 5000psi/345bar | Max flow: 6.6gpm/25lpm | Pump model: DBF-1821FG2, Gearbox reduction | Power and type: 997cc. 2 cylinder diesel engine, air cooling | Start type: Key start | Battery: 12V. 20A/H | G...

Aiko 3WZ-3600JDR 200 Bars Diesel Pressure Washer Water Pump With Gear Box 3WZ-3600JDR

• new

• Manufacturer: Aiko

Max working pressure (head pressure): 3600PSI/248BAR(+/-6%) | Flow rate (pump full capacity): 4.5GPM/17LPM(+/-6%) | Engine model: 186FE | Engine type: Single vertical cylinder, 4-stroke, air-cooled, direct injec...

High-speed Compressor Gearboxes

• new

As a key piece of transmission equipment in the chemical industry, the high-speed gearbox must be able to meet the specific requirements of that industry. NGC’s high-speed gearbox for compressors and expansion ma...

MHP Series Gearboxes for Pumps

• new

For slurry conveying conditions, NGC has created various optimized designs for its gearboxes: reinforced bearings, special seals, special lubrication, and special casings, making them suitable for the complex wor...

MHS Series Gearboxes for Chemical Mixing

• new

For chemical and environmental protection operating conditions, NGC has created a number of optimized designs for its gearboxes: reinforced bearings, special seals, special lubrication, and special casings, suita...

MHK Series Gearboxes with Extended Center Distance

• new

Developed on the MHB platform in response to domestic and international market demands, this series of hard tooth surface reducers inherits NGC's modular design philosophy. It addresses the shortcomings of tradit...

MPG Series Roll Press Gearboxes

• new

Gearboxes are the core transmission components of roll presses, and are usually used in pairs and arranged symmetrically. NGC's latest generation of roll press gearboxes relies on a Sino-German dual-origin R&D te...

MPT Series Tower Mill Gearboxes

• new

The MPT (TM) series of vertical mill gearboxes developed by NGC is a new iteration that combines the advanced modular technology of NGC's MP industrial planetary standard gearbox platform with specific designs fo...

Gearbox Diagnostic Analysis Software

• new

Introduction he GearSight gearbox diagnostic analysis software is mainly used for the post-processing of data. The system can handle data from various bearings and NGC gearboxes, and can automatically identify an...

5.2″ Fizeau Transmission Spheres

• new

GearSight Portable Gearbox Health Monitoring and D

• new

The GearSight Portable Gearbox Health Monitoring and Diagnostic System is a high-end testing device that combines cutting-edge technology with industry expertise. The product can be carried in one hand, making it...

MGDS Series Permanent Magnet-Gear Transmission Sys

• new

NGC's newly developed permanent magnet-gear drive system (MGDS series) integrates a permanent magnet motor, gear transmission, and variable frequency control system, fully leveraging the high efficiency of perman...

Integrated Multi-shaft Compression High-speed Gear

• new

The TGM series integrated multi-shaft compression gearboxes from NGC are primarily used in air separation units, especially large and extra-large ones. They play a critical role the development of industries such...