Used Conveyors in Oregon, USA

#110 Chain Conveyor/Feed Bin

#110 Chain Conveyor/Feed Bin, WD110 chain has 17" wide flites every 3'. Chain and drive sprocket is in excellent condition. Working length is 16 ft. Hopper is 33" deep on discharge end and flares out to 45" w...

Dura-Quip Conveyor Vibrating 35"X32"

• Manufacturer: Quipp

Dura-Quip 35"X32" Vibrating Conveyor. Pan is 7" deep and had 1/4" round hole punched plate in most of length to allow sawdust to drop outside of conveyor but has been recently removed during clean up. Buyer to r...

Inclined Conveyor 14” wide plastic chain

Used Inclined Conveyor 14” wide plastic belt conveyor with flights (overall 16 3/4” wide) Horizontal section is 6ft.5” long 13” off the ground, and incline is 6ft.5” long and 4ft. 8” high. Motor is missing the co...

Chain Conveyor, 42" Wide X 132 Ft. Long Chain Conveyor

Used 42" Wide X 132 Ft. Long Chain Conveyor. Originally used as a conveyor to transport poles in a treating plant. Inside of trough is 13" wide at the bottom, 42" wide at the top and 10" deep. A heavy duty 2.5"...

Belt Conveyor Head Drum 36" dia. X 38" wide

Belt Conveyor Head Drum 36” dia. X 38” wide, rubber covered, with 3-7/16” shaft, bushings and 42 tooth #140 sprocket. See photos of Belt Conveyor Head Drum 36” dia. X 38” wide on our web site. Inventory No. CHD...

Belt Conveyor Head Drum 36" dia. X 63" wide

Belt Conveyor Head Drum 36" dia. X 63" wide, rubber covered, with 3-15/16" shaft, bushings and 48 tooth #160 sprocket. See photos of Belt Conveyor Head Drum 36" dia. X 63" wide on our web site. Inventory No. CH...

Belt Conveyor Head Drum 36" dia. X 51" wide

Conveyor Head Drum 36” dia. X 51” wide, rubber slide lagging, 3-7/16” shaft and bushings. See photos of Belt Conveyor Head Drum 36” dia. X 51” wide on our web site. Inventory No. CHD-2. Located at our Portland...

Dodge Belt Conveyor Tail Drum, 30" dia. X 38" wide

• Manufacturer: Dodge

Dodge Belt Conveyor Tail Drum, 30" dia. X 38" wide, # K35NY, new-surplus. Includes 3-7/16" bushings. See photos of used Dodge Belt Conveyor Tail Drum on our web site. Inventory No. CTD-5 Located at our Portlan...

Dodge Belt Conveyor Tail Drum, 30" dia. X 44" wide

• Manufacturer: Dodge

Dodge Belt Conveyor Tail Drum, 30” dia. X 44” wide, # K35YZ, new-surplus. Requires #3535 taper-lok bushings. See photos of Dodge Belt Conveyor Tail Drum on our web site. Inventory No. CTD-4 Located at our Portl...

Conveyor Belts & Vibrating Tables

Sits at an angle 13” Inside Trough Width 25” Overall Width 210” Overall Length 31” Height 24” Inside Trough Width 26” Overall Width 151” Overall Length 35” Height 12.5” Belt Width 26.5” Overall Width 61" Belt Len...

REDLINE C SERIES CONVEYOR 16'

REDLINE C SERIES INCLINED CLEATED BELT CONVEYOR. 16', 120 VOLT SINGLE PHASE.. $3,595.00...

Stainless Steel Food-Grade Conveyor w/ Chute & Hopper

• Manufacturer: Hydroduty

Food-Grade Stainless Steel Measurements in photos See photos for additional specs