2015 IMT AF190E short-mast
used
- Manufacturer: IMT
Low clearance working height C7.1 ACERT Engine, power of 181.0 kw Weight without Kelly is 47.1 tons 24-V system 151,205 lb-ft of torque 28-ft min working height Just under 4,900 hours 50-ft max drill dept 7-in su...
2007 IMT AF100
used
- Manufacturer: IMT
100-ft + max drill depth! Price just reduced. Single-load IMT CAT 320 class excavator Drill is in running condition and priced to move 4-element locking Kelly bar for 100-ft+ max depth 15,205 hrs currently on the...
Interoc AN109B 9086
used
- Manufacturer: Interoc
Excellent for tieback/nail/micropile work Tie-back drill w/ Krupp HB40A Rotary and double clamps Excellent for tieback/nail/micropile work Mast stroke of 15 ft Weight: 27,000 lbs Deutz Diesel Engine Model BF6L913...
2001 IMT AF 80TM
used
- Manufacturer: IMT
Good condition IMT with low hours and miles Only 2,435 hours on CAT 3046 engine Mounted on TOR DR-8690 (CAT 3126 engine) with 12,776 miles Max drill depth of 131 ft 5-in sub with 7-in adapter box Round pin type
Converse, TX
1997 Watson 2500 on TOR
used
- Manufacturer: Watson
Great condition 2500 on TOR Price just reduced! Really good condition 2500 Watson on TOR carrier. Recently replaced upper transmission. Has 2-element kelly with 8″ outer and 6″ inner for a 60′ max depth. Powered ...
2017 Watson 3110 CM
used
- Manufacturer: Watson
One-owner, low-hour rig! Price just reduced AGAIN! Double reduction mechanical rotary w/ 120,000 ft-lbs of torque 2-element friction Kelly with 80-ft max depth (hollow inner) 5″ stub Controlled free-fall winch wi...
2015 CZM EK200sm
used
- Manufacturer: CZM
Short-mast EK200 ready to work. This is the CZM EK200 in low clearance application. The 6-element interlocking kelly will reach depths in excess of 90′. With manufacturer stated torque of over 167,000 ft-lbs, thi...
2010 Watson 3260 CM
used
- Manufacturer: Watson
Beefy, torque monster of a rig! Rig is dependable and in every day operations Swing motors mounting plate recently replaced by Watson Final drive recently repaired by Watson Transmission gone through early 2023 N...
1996 Texoma Taurus XLT
used
- Manufacturer: Texoma
- Model: TAURUS XLT
120-ft Max drill depth Price Reduced Job-ready rig 120-ft max drill depth 150,000 lb-ft of torque 8.3 L Cummins engine 2,003 hours put on by current owner 7-in sub, slot pin Triple square Kellies
2016 Casagrande B160XP
used
- Manufacturer: Casagrande
- Model: B160XP
2016 Casagrande B160XP with only 956 hours of use (as of August 2020) Very nice 2016 Casagrande B160XP. S/N B160US0100. This is a beautiful rig that will give you years of service. It has a Tier 4 Engine, 4 secti...
2007 IMT AF130
used
- Manufacturer: IMT
120-ft digger! AF130 drill rig w/ J-lock 120-ft 4-element Kelly bars Mounted on a CAT 324DLN w/ CAT 7 series engine w/ 175HP at 1,800 RPM Current engine hours of 10,823 The AF130 has 86,295 ft-lbs of rotary torqu...
2002 LoDril LLMHT-40R
used
- Manufacturer: LoDril
Good running LoDril on 330BL This LoDril LLMHT-50R was assembled by Bay Shore in 2002 on the 2000 CAT 330BL. The round-locking bar set was a 4-element 50′ drill depth , but has been converted to a 3-element 40′ d...
IMT AF-80
used
- Manufacturer: IMT
2001(First sold Dec 2004) IMT AF-80, S/N 01.395 mounted on Cat 315B, S/N 05A13056 Price just reduced 2/23! Nice working AF80. Manufactured in 2001, First Sold Dec 7, 2004. 120Ft depth 60,000 lbs torque. Mounted o...
2008 Soilmec SF-70
used
- Manufacturer: Soilmec
- Model: SF-70
Cat C7 engine 14,460 hours as of Dec. 2024 Kelly: XHD5 connector 88.5-ft max drill depth
Vermeer PD5R Piling Rig
used
- Manufacturer: Vermeer
- Model: PD5R
Good condition Vermeer PD5R Piling Rigs manufactured in 2021. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword