Agriculture » Applicators » France

Building Filters

374

Used Applicators in France

  • 2008 Evrard ALPHA PLUS 4100

    2008 Evrard ALPHA PLUS 4100 EASY DRIVE

    • Manufacturer: Evrard
    • Model: ALPHA PLUS 4100 EASY DRIVE
    • Horsepower: 210 hp
    • Hours: 3,780 h

    Aluminium Ramp 6 sections DPAE Section cut by GPS Electronic gauge Trimble guidance Tires 460/85R38 Customer consignment: 06 43 36 93 25

    Gennes-Longuefuye, France
  • 2000 Caruelle OLYMPIA 250 S

    2000 Caruelle OLYMPIA 250 S

    • Manufacturer: Caruelle
    • Model: OLYMPIA 250 S
    • Tank capacity: 2,500 L
    • Boom width: 24 m

    DPAE Regulation Cabin box: "Integral" Machine box "select-van" Stainless steel hoses 48 quadrijets Conveyor trough and bottle washer Hand wash basin - ribbon gauge Tilt correction - ramp lighting Axle suspension...

    Gennes-Longuefuye, France
  • 2008 Berthoud TENOR

    2008 Berthoud TENOR

    • Manufacturer: Berthoud
    • Model: Tenor
    • Tank capacity: 3,500 L
    • Boom width: 32 m

    Side folding DPAE control Tank volume 3500L DP TRONIC box 6 sections Wheel sensor Rinsing and hand washing tank Product incorporator Open/close rinsing of drums? (Rinse cartons)

    Gennes-Longuefuye, France
  • 2004 Caruelle OLYMPIA120

    2004 Caruelle OLYMPIA120

    • Manufacturer: Caruelle
    • Model: OLYMPIA120
    • Tank capacity: 1,200 L
    • Boom width: 24 m

    Tank 1200L Electrical DPM regulation Steel ramps 24.00m in 4 sections Parallelogram on nitrogen ball Quadrijets Semi-continuous circulation Automatic hitching

    Gennes-Longuefuye, France
  • 2004 Berthoud ACCESS

    2004 Berthoud ACCESS

    • Manufacturer: Berthoud
    • Model: ACCESS
    • Tank capacity: 1,000 L
    • Boom width: 18 m

    Tank volume: 1000L Lateral folding DPM control 4 Sections Triangle hitch Rinsing tank + hand wash Product incorporator Can rinse Agitator Hydraulic ramp lifting Slope corrector Plastic hoses 2 sets of complete no...

    Gennes-Longuefuye, France
  • 2018 Kverneland IXTER B

    2018 Kverneland IXTER B

    • Manufacturer: Kverneland
    • Model: Ixter
    • Tank capacity: 18 L
    • Boom width: 28 m

    Rear tank 1800 Litres Front tank 1200 Litres Scale Automatic hitch Rinsing tank 300L Hand wash tank Product incorporator Bottle rinse Agitator Piston/membrane pump Vertical rear boom L 28m 11 sections Inox piping...

    Gennes-Longuefuye, France
  • 2005 Evrard METEOR

    2005 Evrard METEOR

    • Manufacturer: Evrard
    • Model: METEOR
    • Tank capacity: 4,100 L
    • Boom width: 36 m

    Type : : Meteor 4100 Year of manufacture : : 01/2005 : Aluminum ramp with 2 arms, CONTROL UNIT : Type : Regulor 5 : 9 - Sections, Stainless Steel Piping, Pentjets : DPAE, Deviation corrector, Variable geometry, C...

    Bray-Saint-Aignan, France
  • 2009 Caruelle OLYMPIA120S

    2009 Caruelle OLYMPIA120S

    • Manufacturer: Caruelle
    • Model: OLYMPIA120S
    • Tank capacity: 1,200 L
    • Boom width: 24 m

    Year of manufacture: 2009 : Gip control valid until 05/27

    Bray-Saint-Aignan, France
  • 2013 Evrard VTK 40

    2013 Evrard VTK 40

    • Manufacturer: Evrard
    • Hours: 2,613 h
    • Tank capacity: 3,000 L

    For more information call 06 21 40 41 61 Type of news: Sale / Offer | Hours: 2 613 h | Power: 170 ch | Ramp width: 28 m | Capacity: 3 000 L

    Bray-Saint-Aignan, France
  • 1997 Spra-Coupe 4650

    1997 Spra-Coupe 4650

    • Manufacturer: Spra-Coupe
    • Model: 4650
    • Hours: 4,950 h
    • Tank capacity: 1,500 L

    Washing tank: : yes : hydraulic variable track, DPAE, 4 sections Ramp type: : aluminum : hydraulic angle corrector, variable geometry, Raven box, tires 12.4R24 / 12.4R28, max track width 2.40m / 1.80m min,

    Bray-Saint-Aignan, France
  • 2000 Matrot M24D

    2000 Matrot M24D

    • Manufacturer: Matrot
    • Model: M24D
    • Hours: 3,703 h
    • Tank capacity: 2,400 L

    Engine: Deutz CONTROL UNIT: Type: Spraymatic Ramp type: front aluminum DPAE, Isagri Guiding Bar, 7 sections Rinse tank: Yes Product incorporator: Yes Gip control Valid until 02/2026

    Bray-Saint-Aignan, France
  • 2022 John Deere R4150i

    2022 John Deere R4150i

    • Manufacturer: John Deere
    • Model: R4150I
    • Hours: 1,250 h
    • Tank capacity: 5,000 L

    Type : : R4150i PowrSpray Manufacturing year : : 2022 : Return estimate Cabin : : Premium : Full leds Engine : : Deere 6.8 l Phase V : Multifunction CommandARM Console and Lever, Angle Monitor, Cameras with 2 scr...

    Bray-Saint-Aignan, France
  • 2020 Horsch LEEB5LT

    2020 Horsch LEEB5LT

    • Manufacturer: Horsch
    • Model: LEEB5LT
    • Tank capacity: 5,000 L
    • Boom width: 38 m

    Type : : Leeb 5 LT Year of manufacture : 04/2020 Ramp type: : Steel : In 7 arms, 12 segments : Nozzles at 25, nozzle holder trijet with pneumatically anti-drip, with manual selection : Automatic switching AutoSel...

    Bray-Saint-Aignan, France
  • 2009 Kuhn OCEANIS4500

    2009 Kuhn OCEANIS4500

    • Manufacturer: Kuhn
    • Model: OCEANIS 4500
    • Tank capacity: 4,500 L
    • Boom width: 36 m

    Type : : Oceanis 4500 Year of manufacture : : 2009 : 9 - Sections Front tire dimension : : 24,5x32 Regulation : : reb3 Ramp unfolding : : lateral Accessories : : tilt correction : integration GPS sections cut, ax...

    Bray-Saint-Aignan, France
  • 2008 Blanchard GRAND LARGE

    2008 Blanchard GRAND LARGE

    • Manufacturer: Blanchard
    • Model: GRAND LARGE
    • Tank capacity: 4,000 L
    • Boom width: 36 m

    Year of manufacture: 2008 : Regulation DPAE, Prefabrication only of segments GPS cut, 6 - Segments, Aluminum ramp, Hydraulic tilt corrector, Ramp lighting, Variable geometry, Continuous operation CONTROL BOX: Typ...

    Bray-Saint-Aignan, France
  • no-image_en.png

    Kverneland Ixter Applicator

    • Manufacturer: Kverneland
    • Model: Ixter

    Good condition Kverneland Ixter Applicators available between 2011 and 2017 years. Located in France and other countries. Click request price for more information.

    France
12345

Overview

Applicators are specialized machinery designed to apply various substances such as fertilizers, pesticides, or seeds to crops and fields. They come in different types and sizes, including sprayers, spreaders, and seed drills, each tailored to specific agricultural needs. These machines help increase efficiency and ensure even distribution of materials, which is crucial for optimal crop growth and yield.

FAQ

What should I consider when buying a used applicator?

Check the machine's overall condition, including the pump, nozzles, and any electronic components. Review maintenance records and ensure that the applicator has been well cared for.

How do I ensure the applicator is shipped safely to my location?

Choose a shipping company experienced in transporting agricultural machinery. Make sure the applicator is securely fastened and protected from potential damage during transit.

What is the maintenance schedule for an applicator?

Regular maintenance includes checking and cleaning nozzles, inspecting hoses and seals for leaks, and ensuring the pump is in good working condition. Follow the manufacturer's guidelines for detailed maintenance.