- Trusted Seller
2025 LaON Technology Pilot
- Manufacturer: LaON Technology
Four-lane carbide knife cutting with ±0.1mm accuracy and <20μm burr specification Wheel-type knife system with AC reversible motor drive and fixed block configuration EPC system with speed control motor for elect...
- Trusted Seller
2006 Vision Engineering Hawk MKII
- Manufacturer: Vision Engineering
Dynascopic viewing head with crosshair reticle Hawk metrology stand (3-axis) with LED substage illumination (manual operation) Power cable for Hawk head 3-channel LED illumination controller for manual systems I/...
- Trusted Seller
1989 Hex Industries VAC-836-FT
- Manufacturer: Hex Industries
Equipment Overview Passive vaporizer using ambient air convection across finned tubes for vaporizing cryogenic liquids. Key Features & Specifications • 10,000 SCFH • 400 PSIG pressure • Finned tube design • Natur...
- Trusted Seller
2021 Matrix MX370P
- Manufacturer: Matrix
Speed 10 m/min (33 ft/min) Film Width 340 mm (13″) Sheet Width 420 mm (17″) Paper Weight ≥ 135 gsm Temperature 0–140 °C Control Multilingual LCD, semi-auto feed, auto separator Power 220–240 V, ~13 A, 2.2 kW Size...
- Trusted Seller
2020 Turfco Torrent 2
- Manufacturer: Turfco
- Model: TORRENT 2
Model Torrent 2 Debris Blower (#85651) Width Outside of tire to outside of tire – 48” (1.22 m) Height Nozzle pointed up – 40.5” (1.03 m), To top of engine – 36” (0.92 m) Length Hitch to end of chute – 108.8” (2.7...
- Trusted Seller
2014 Spider SC1500;SR;50Hz
- Manufacturer: Spider
14 x 12 x 24 in Machine type: Other Process | Machine location: Washington | Stock #: 438670 | Rated for: 1500 lbs. | Weight: 105 lbs
- Trusted Seller
2016 Munson CIM-18-MSL
- Manufacturer: Munson
230/460 V / 3 Phase / 60 Hz Machine type: Process Equipment | Machine location: Nevada | Stock #: 576844
- Trusted Seller
2018 Esporta IS-4000
- Manufacturer: Esporta
Number of Washing Compartments 4 Capacity 100 lbs (45 kg) Electrical Requirements 220V Single Phase, 40 Amp Water Input 3/4″ Hot & Cold water lines Drainage 3″ Detergent Pumps 6
- Trusted Seller
2019 Hennecke MicroLine 45 R/MT
- Manufacturer: Micro Line
The Hennecke MicroLine series is designed for high-pressure metering of polyurethane (PU) components, particularly where small outputs and high precision are required. The MicroLine 45 R/MT is tailored for applic...
- Trusted Seller
2018 Goff 2036
- Manufacturer: Goff
Two (2) Twenty H.P. Direct Drive Blast Wheels Manganese Carousel Triple Chamber Design Three (3) Cast Lined Chambers 20” Airwash Separator Rotary Screen Scalping Drum Pit-less Design 440 Volt / 3 Phase / 60 Hz
- Trusted Seller
2012 Vogt P18AL 10TA-LAK5-26NC-063
- Manufacturer: Vogt
10 Tons/Day Low-Side Refrigerant- Ammonia Crushed Ice Tube Size 1 1/4″ 208/230v 3ph 60hz
- Trusted Seller
Nordson 107115C
- Manufacturer: Nordson
– Booth overall: 102”x 266,” Opening: 36” x 84” – Includes Two brand new never used automatic oscillator (5 guns each) – 2x filters included -Includes I control, also known as an automation or “recipe maker” -Inc...
- Trusted Seller
2021 P/A Industries SS89LASTL
- Manufacturer: PA Industries
Manufacturer P/A Industries Model SS89LASTL Type Pallet Reel Straightener Coil Type Pallet-mounted coil (horizontal payoff design) Max Coil Width Approx. 18–24 in. (depending on configuration) Max Coil OD Approx....
- Trusted Seller
2023 Key Technologies PulseScrubber Continuous Polisher
- Manufacturer: Key Technologies
Manufacturer Key Technologies Model PulseScrubber Continuous Polisher Type Continuous rotary polisher / scrubber Material of Construction Food-grade stainless steel Operation Type Continuous, fully automatic Typi...
- Trusted SellerAuction
2020 Aerobiotix 852348007995
- Manufacturer: Aerobiotix
Illuvia® Sense is a surgical air disinfection system with sensing and reporting technologies, labeled for reducing risk of infection, and improving overall environmental safety in operating room environments. *Pr...
Sardinia, OHVisit Auction Website 
Shanklin S-24 Shrink Wrapping Machine
- Manufacturer: Shanklin
- Model: S-24
Good condition Shanklin S-24 Shrink Wrapping Machines manufactured in 2001. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
