Used Forging in Canada

ACMA Hot forging machine

• Manufacturer: Acma

Equipped With * 1Die 1Blow forming stations * 15kW Induction heating unit & self container chiller * Machine suited for production of ejector pins or exotic fasteners & material parts ? Titanium, Inconel, Waspall...

HYODONG 6Die - Eco Design

• Manufacturer: HYODONG

Equipped With Specifications: HLNP-618 Specifications: Features: HL Series Highlights: ** Innovative former design using knuckle press type structure & power transmission method. With no crank shaft, machine uses...

HYODONG 36mm

• Manufacturer: HYODONG

Equipped With Specifications: Features: MACHINE FEATURES/TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and p...

AJAX 1″ UPSETTER

• Manufacturer: Ajax

Equipped With Catalog Specifications: Forging tonnage: 200 t | Max bar diameter: 1" | Stroke per minute: 75 | Stroke of machine: 6” | Hold: 1-1/2" | Die opening: 2" | Stock gather: 3-3/2" | Motor: 10 HP | Floor s...

AJAX 1″ UPSETTER

• Manufacturer: Ajax

Equipped With Forging tonnage: 200 t | Stroke per minute: 90 | Stroke of machine: 6? | Grip opening: 2-1/4? | Gather: 3-3/4? | Hold: 2-1/2" | Die height: 9? | Die thickness: 5? | Motor: 7.5 HP | Floor space-width...

National #6

• Manufacturer: National

Equipped With * AIR CLUTCH * AIR BRAKE * CONTROLS MAXIMUM LENGTH OF ROLLED SECTION: 24"

NAZEL 4B 600LBS Blacksmith Power Forging Hammer Pneumatic Self-Contained

"Normal wear from use but that- OVER 30 years ago, and since then- always kept in dry storage. You MUST read the history of it below. Great condition with smooth ram cylinder surface. i.e. no scoring. It will nee...

HYODONG Three & Four Die - Compact Design

• Manufacturer: HYODONG

Equipped With Specifications: Bolt Size: M6 [1/4"] (10AF) Bolt Size: M8 [5/16"] (14AF) No of dies: 3-4 Dies Forging Load: 300kN // 500kN Output speed: up to 400/300ppm Features: * New Simple & Compact Design mini...

HYODONG Nut Former

• Manufacturer: HYODONG

Equipped With Specifications: Features: EXAMPLES OF TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and punch ...

WATERBURY #33

• Manufacturer: Waterbury Farrel
• Model: 33

Equipped With * Lots of Tooling Available Max. for extruding and collaring: 5/8"

VAUGHN #10

• Manufacturer: VAUGHN

Equipped With Nuber of dies: 1 | Block diameter: 25" | Main motor: HH4 Ho 240 VOLT DC

National 4″ UPSETTER

• Manufacturer: National

Equipped With Features: Air Clutch and Brake Maximum bar diameter: 2.5 inches | Upsetting power: 500 tons | Stroke per minute: 55 | Stroke: 9.5 inches | Grip opening: 4 inches | Grip tons: 250 tons | Gather: 6.8 ...

ACMA 1D1B Hot forming machine

• Manufacturer: Acma

Equipped With * 1Die 1Blow forming stations * 15kW Induction heating unit & self container chiller * Machine suited for production of ejector pins or exotic fasteners & material parts ? Titanium, Inconel, Waspall...

1995 TOWA 4A

• Manufacturer: Towa

Equipped With * Pneumatic load/unload Minimum length: .590" | Maximum length: 4" (6" with pneumatic loader) | Minimum shank diameter: .118" | Maximum shank diameter: .748" | Chucking clearance: .709" | Chuck open...

AJAX 3″ UPSETTER

• Manufacturer: Ajax

Equipped With Maximum bar diameter: 3 inches | Upsetting power: 600 tons | Stroke per minute: 45 | Stroke: 11.250 inches | Gather: 7.5 inches | Hold: 3.5 inches | Die opening: 5 inches | Die space height: 20 inch...