Used Sheet Metal Processing

Binks Paint line

• Manufacturer: Binks

"Paint line is a continuous chain on edge line with a primer booth, flash oven, spray booth and curing oven. The entire paint line is clean and functional. Located in Two River, WI "

72 inch Sheet Metal Brake | Hydraulic Box and Pan Brake

6′ x 10Ga. Hydraulic Box and Pan Brake with free angle set-up control Taiwan Machines ISO 9001 certified Hydraulic adjustment for opening Hydraulic power clamping for workpiece 26” manual back gauge with handwhee...

MFG CNC Motorized Sheet Metal Folding Machine (0,3 – 2,5 mm thickness / 2050-3200 mm length)

0,3 – 2,5 mm thickness / 2050-3200 mm length 180 mm opening height capacity on the upper beam. Eccentric upper beam power transmission system for rapid clamping/unclamping. 10 and 25 mm wide single piece folding ...

SFA CNC Servo Sheet Metal Folding Machine (0,3 – 4 mm thickness / 2050-4200 mm length)

0,3 – 4 mm thickness / 2050-4200 mm length Clamping beam with 350 mm opening height and 170 mm high, segmented goat foot tools. Dual drive clamping beam with ball screw spindle system for more clamping power. 150...

MFE CNC Servo Sheet Metal Folding Machine (0,3 – 5 mm thickness / 2050-4200mm length)

0,3 – 5 mm thickness / 2050-4200mm length Clamping beam with 180 mm opening height and dual servo driven ballscrew spindle system. 30° single piece sharpnose tool. 15 and 40 mm wide folding beam tools, single pie...

MFB CNC Motorized Sheet Metal Folding Machine (0,3 – 3 mm thickness / 2050-4200mm length)

0,3 – 3 mm thickness / 2050-4200mm length 220 mm opening height capacity on the upper beam. Eccentric upper beam power transmission system for rapid clamping/unclamping. 1000 mm servo backgauge system with feathe...

7075-0 Sheet Metal - 40+ Sq Ft

May have some cuts made. 20+ Sq Ft of .063", 25+ Sq Ft of .032"

MFG CNC Motorized Sheet Metal Folding Machine (0,6 – 2 mm thickness / 2550-3200 mm length)

0,6 – 2 mm thickness / 2550-3200 mm length 750 mm servo backgauge with feather fingers Erfold basic cnc LBL software on 15’’ touchscreen controller 20°/R1 sharpnose tool on clamping beam 10 and 25 mm wide folding...

REIS TUS 160

• Manufacturer: Reis
• Model: TUS-160

Used 1998 REIS Model TUS 160 hydraulic mold spotting and tryout press. 100-ton capacity, 4-post design, 61" W x 71" L bed area, 39.37" stroke, and 41.33" opening. Includes swing down platen and sliding table for ...

7075-0 Sheet Metal - .040" - 30+ Sq Ft

May have some cuts made.

Reis TUS-130 Sheet Metal Processing

• Manufacturer: Reis
• Model: TUS-130

Good condition Reis TUS-130 Sheet Metal Processing available between 1997 and 2001 years. Located in USA and other countries. Click request price for more information.