Used compression

Pneumatic sand transporter 220 l

Type: DE12, Serial number: 9484 Year of construction: 26/11/2001, Weight: ± 300 kg With gate valve Ø 160mm, outlet Ø 80mm Without command panel

Pneumatic sand conveyor BONIFACE 125 l

Type: TP125, Serial number: 12560 With 2 sand inlets Ø 160mm, with 2 pneumatic flaps Sand exit Ø 70mm, sand inlets height ± 1600mm Manometer on pressure, a sensor high level, with compressed air regulator and dry...

Pneumatic sand feeder HENSEL 100l

• Manufacturer: HENSEL

Dimensions: Length: 1160 mm; Width: 800 mm; Height: 1320 mm Max. temperature = 200 °C

Pneumatic sand feeder KLEIN 260 l

With 2 possibilities inlet and exit With cone fastener

Pneumatic sand rams longer than ±600mm, width

Several brands With a rubber tip In good working condition, without warranty, repainted with second hand ramming foot If requested with new ramming foots for an additional price of 60 € (round - rectangular, sphe...

NEW pneumatic sand conveyor FAT, S150 l

Type: S150-100, serial number: 5129 KOM N°: 18659 Weight: 295 kgDimensions: 1000 mm x 800 mm x 145 mmOutlet: Ø 80 mm inlet Ø 150 mmWith cone closure for side filling, 2 openingsControl voltage 230 VWith control...

2009 Pneumatic sand feeder NEUHOF, with CE type plate, 150 l

Type: PDGF150, serial number: 271 With compressed air-fluidizing base inside With height-adjustable feet With level sensor on the top With pneumatic vent valve and overpressure valve

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

Dust/sand feeder FAT, ± 30 l

Serial number: 1176, year of construction: 1989 With compressed air acceleration into the bottom Input Ø 205 mm, exit Ø 50 mm With pneumatic cone With control valves

Core sand mixer 120l V&S

• Manufacturer: Vogel&Scheman

Pneumatic outlet flap Capacity: 120 litres

1977 Core sand mixer FORDATH 1000 kg, FORDATH, 700-900 l

In good condition Useful capacity ± 700 at 900 l, pneumatic door on the side

1989 Core sand mixer GIETARD, type ZAMIX I, 50 l

3 hp, 1490 rpm, 220/380 V Draining by pneumatic door With safety equipment

Core sand mixer ±100l

Core sand mixer Dimensions: Length: 1200mm; Width: 1200mm; Height: 1000mm Useful dimensions: Ø700mm; height: 400mm Gear motor: SEW; Type: KF87DRN132M4 7,5kW; 290/500V; 1460rpm Pneumatic application flap Pneumatic...

Core sand mixer BADIE MIXTENSIF, 200 l

• Manufacturer: MIXTENSIF,

Inside dimensions: Ø830 mm, depth: 410 mm With pneumatic discharge flap With protective grille

1994 Sand conveyor ECO-ENGINEERING, 300 l

Construction year: 1994, weight: ± 400 kg With control, sensors, shutter with pneumatic ventil and emergency stop