Used processing in Belgium

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

Sand aerator for belt conveyor, width 450 mm

Motor CEM, type MJUK 132 S, 5,5 kW, 220 / 380 V, 1445 rpm Mounted on a conveyor belt or placed above the sand aerator, length 4000 mm Transmission between motor and fraise by belts With tube for dust extraction, ...

Furan sand mixer BORDEN, ± 2 t/h

Motor UNILEC, type T132, serial number 410416N00003; 4 kW; 220/380 V; 960 rpm 1 x input sand with bucket 20 mm x 50 mm, without bucket 80 mmx 80 mm 1 x additional sand input, Ø 50 mm Between axles enter and exit...

Core sand batch mixer 50 l FORDATH BONIFACE N.5

Type: N5, weight: ± 400 kg Useful Ø 530mm, useful height 400mm With hand clap, protection grill and button start-stop Emptying flap from downside, opening half-round

Core sand batch mixer, 50 l, FORDATH/BONIFACE, type N.5

4 kW; 940 rpm; 220/380 V With manual distribution flap

Core sand mixer 50 l, V+S

In good condition Old model Weight: 200 kg | Motor: 220/380 V

Small sand hopper with dust cleaner ± 1m³

Without foot and plug Cleaning by vibraiting Filter (collector) DCE Unimaster Type UMA 100V N. 200468

1972 Sand conveyor 200 l, KLEIN

With 2 level detectors Weight: 300 kg | Outside dimensions: Ø 700 mm, h. 1800 mm | Pressure: 8 bar, 100 °C

Sand aerator rotating ± 10 t/h

• Manufacturer: T KETIN & R THIRIANT

Sand entry 300mm, Ø 240mm entry sand Transmission by wheel Ø 200mm (flat)

Mobile sand aerator

On 2 full rubber wheels, as a barrowfull With vibrating sieve 600 x 400mm, stich 20 x 20mm The sand aerator is a rotative barrel with 2 bars 300mm All driven by a motor In good condition, weight 300 kg

Mobile sand bunker, ± 500 l, with discharge conveyor

Mobile bunker, 1260 mm x 760 mm, h. 950 mm, with cone With adjustable outlet slide Equipped for forklift transport Ideal for green sand, hand moulding

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side, with manuel valve With control box With declaration of conformity CE

Dust/sand feeder FAT, ± 30 l

Serial number: 1176, year of construction: 1989 With compressed air acceleration into the bottom Input Ø 205 mm, exit Ø 50 mm With pneumatic cone With control valves

Sand silo, ± 65 m³, complies with ± 90 t

With level sensor on the roof and manhole with overpressure valve Without ladder, balustrade, filter, discharge flap, filling tube

Sand blast vessel ARIA, ± 280 l

Type: PN179/89, serial number: 586 With funnel and cover With pneumatic control box and pressure regulator