Used conveyor

EIW 54in Dia. x 33ft Long Twin Sandscrew

• Manufacturer: Arena
• Phase type: Three-phase

Size: 54in x 33ft | Trough dimensions: 33ft Long x 115in Wide x 50in Deep | Screw dimensions: 54in Dia. x 33ft Long | Drive: (2) Electric Motors | Power output: 30HP | Rotation speed: 1770RPM | Voltage: 460 Volt...

Sand aerator for belt conveyor, width 450 mm

Motor CEM, type MJUK 132 S, 5,5 kW, 220 / 380 V, 1445 rpm Mounted on a conveyor belt or placed above the sand aerator, length 4000 mm Transmission between motor and fraise by belts With tube for dust extraction, ...

7TPH Silica Sand Processing Plant

Equipment List: 1. Power Module: a) Feed Hopper b) Belt Feeder 500x3.5, 2.2kW 2. Conveyor Belt: a) Conveyor Belt 500x15 3kW b) Conveyor Belt 500x10 2.2kW c) Conveyor Belt 500x10 2.2kW 3. Washing Cylinder CM 11.03...

Sand conveyor 640 l, KLEIN

Serial number : 2551/4, Weight : 400 kg Input Ø 200mm, exit Ø 100mm, with sensors, with pneumatic valve Price overhauled is with the control box

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

Sand conveyor 300 l, GUT

With sensors Shutter with pneumatic ventil With control box and bac stop valve on the sand outlet Ø 80 mm

Sandbunker with disloading conveyor 6 m³

Drive over chain; height at the sand arriving ± 2400 mm

Sand conveyor KLEIN 200 l

Outside dimensions: Ø 750 mm, inlet height: 1450 mm Cone closing 8 bar, content 200 L, 100°C Overhauled with a new switch cabinet

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...

1972 Sand conveyor 200 l, KLEIN

With 2 level detectors Weight: 300 kg | Outside dimensions: Ø 700 mm, h. 1800 mm | Pressure: 8 bar, 100 °C

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

Mobile sand bunker, ± 500 l, with discharge conveyor

Mobile bunker, 1260 mm x 760 mm, h. 950 mm, with cone With adjustable outlet slide Equipped for forklift transport Ideal for green sand, hand moulding

1994 Sand conveyor ECO-ENGINEERING, 300 l

Construction year: 1994, weight: ± 400 kg With control, sensors, shutter with pneumatic ventil and emergency stop