New Energy in Gauteng, South Africa

Hand Operated Hydraulic Power Pack (UTC-4810)

Compression and Flexural Machines Product Code: Description: The UTC-4810 Hand Operated (Manual) Hydraulic Power Pack has been designed to be used with range of UTEST compression and flexural frames to use on sit...

Forces on a suspension bridge (SE110.18)

different load cases possible: point or distributed load Description: Suspension bridges are among the oldest of all bridge designs. Their main supporting element is a flexible cable. Since cables are able to abs...

Lines of influence on the Gerber beam (SE110.12)

• Manufacturer: Gerber

articulated beam with two cantilever beams and a suspended beam as an example of a typical bridge Description: Many bridges are executed as Gerber beams. Bridges are subjected to moving loads. Consequently, it is...

Dial gauges (SE 110.30)

position measurement gauges for measuring deformation and displacement in mechanical experiments Description: This set of mechanical dial gauges enables mechanical travel to be measured. Deflection or displacemen...

Motorized (Semi-Automatic) Hydraulic Power Pack (UTC-4820)

Compression and Flexural Machines Product Code: Description: The UTC-4820 Motorized (Semi-Automatic) Power Pack, controlled by a pressure rate control valve is designed to supply the required oil to the load fram...

Motorized (Semi-Automatic) Hydraulic Power Pack (UTC-4820)

Compression and Flexural Machines Product Codes: Description: The UTC-4820 Motorized (Semi-Automatic) Power Pack, controlled by a pressure rate control valve is designed to supply the required oil to the load fra...

Circuit Board Kit (Kc1)

Description: Designed for basic study of circuits Can be used to investigate parallel and series circuits, the use of ammeters and voltmeters, the effects resistors and the relationship of volts, amps and resista...

Dynamic behaviour of multistage planetary gears (GL 212)

four different transmissions can be configured Description: The planetary gear is a special type of gear drive, in which the multiple planet gears revolve around a centrally arranged sun gear. The planet gears ar...

Hand Operated Hydraulic Power Pack (UTC-4810)

Compression and Flexural Machines Product Code: Description: The UTC-4810 Hand Operated (Manual) Hydraulic Power Pack has been designed to be used with range of UTEST compression and flexural frames to use on sit...

Three-hinged arch (SE110.17)

various load cases: point load, distributed load, moving load Description: Bridges are often constructed as three-hinged arches. This type of construction is particularly suitable when compression-proof building ...

Parabolic arch (SE110.16)

statically determinate or statically indeterminate parabolic arch under load Description: Parabolic arches are popular elements in construction engineering. They can be employed as bridges or beams for example. N...

Mounting frame (SE 112)

mounting frame for setup of experiments in statics, strength of materials and dynamics Description: The mounting frame SE 112provides a clearly laid-out, user-friendly means of setting up experiments in the field...

Centrifugal force (TM 600)

laws of the behaviour of rotating masses Description: Centrifugal force occurs in the motion of a rigid body on an orbit and is the inertia force, which acts with a direction away from the centre of rotation. The...

Field balancing (PT 502)

measurement of imbalance vibrations Description: In rotating machines such as turbines or pumps, vibrations due to imbalance lead to comfort problems or even damage related to overloading. The imbalance of a rota...

Determination of the Vapour content (ET805.50)