New Environmental Chambers

Vacuum chamber VC P400x400

The VC P400x400 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slit...

Vacuum chamber VC P150x160

The VC P150x160 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slit...

Frimed PT45

• Manufacturer: Frimed

PT45 Temperature test chamberCapacity 450 liters Temperature rangeTemperature range: 10°C/+60°CStability: better than ±1°C Dimension and weightExternal: 700x1000x1730 (LxDxH - mm)Internal: 580x670x1200 ((LxDxH - ...

Frimed PT70

• Manufacturer: Frimed

PT70 Temperature test chamberPT70 model Capacity700 liters Temperature rangeTemperature range: 10°C/+60°CStability: better than ±1°C Dimensions and weightExternal: 700x1000x1990 (LxDxH - mm)Internal: 580x670x1500...

Frimed PT140

• Manufacturer: Frimed

PT140 Temperature test chamberPT140 Model Capacity1400 liters Temperature rangeTemperature range: 10°C/+60°CStability: better than ±1°C Dimensions and weightExternal: 1400x950x1990 (LxDxH - mm)Internal: 1280x670x...

Frimed PH70

• Manufacturer: Frimed

PH70 Temperature/Humidity test chamberPH70 Model Capacity700 liters Temperature/humidity rangeTemperature range: 10°C/+60°CStability: better than ±1°C Humidity range %: 20% / 85%Dew point: 5°C to +50°CStability: ...

Frimed PH140

• Manufacturer: Frimed

PH140 Temperature/humidity test chamberPH140 Model Capacity1400 liters Temperature/humidity rangeTemperature range: 10°C/+60°CStability: better than ±1°C Humidity range %: 20% / 85%Dew point: 5°C to +50°CStabilit...

Frimed PH45

• Manufacturer: Frimed

PH45 Temperture and Humidity Test ChamberPH45 Model Capacity450 liters Temperature/humidity rangeTemperature range: 10°C/+60°CStability: better than ±1°C Humidity range %: 20% / 85%Dew point: 5°C to +50°CStabilit...

Anzani VTJ

• Manufacturer: Anzani

Vacuum Heat Setter VTJ is a vacuum system for ironing and stabilization of the upper on last, trough the following treatments: Vacuum creation in hermetic chamber High pressure steam input, for softening the uppe...

Anzani AMD 701

• Manufacturer: Anzani

Mocassin Drier AMD 701 carries out the drying of moccassins immersed in water , before the Handmade sewing. The drying requires from 40 to 60 minutes, allowing a great time saving compared to the natural drying, ...

Anzani Turbo Frost

• Manufacturer: Anzani

Chiller TURBO FROST is a chiller , for both shoes and boots, that carries out the functions of glue crystallization , cold setting of the upper and, upon request, hot reconditioning for the anti-condensation of t...

Anzani Ecojet

• Manufacturer: Anzani

Heat Setter for the Shoe Ironing and Stabilization ECOJET is a heat setter for ironing and stabilization of the shoe with forced humid hot air, located after the heel seat lasting. Thanks to a technological innov...

SR3 Tecnosens

• Manufacturer: Tecnosens

Test chamber (220V AC) Dimensions: 235 x 180 x 210mm Power consumption: about 10W

Mikrotest Climate Chamber

• Manufacturer: Mikrotest

Daphne Impianti Special plants-metrological room

• Manufacturer: Daphne Impianti

Air-conditioned metrological room with temperature and humidity electronically checked, thanks to a humidification system with isothermal steam type.