New Machine Tools in Japan

boring bit

• Manufacturer: TOHO CHIKAKOKI

Boring bits are at the cutting edge of drilling tools and drill directly into the ground. The most efficient bit selection depends on the purpose of the boring and the condition of the ground.

Boring Rod

• Manufacturer: TOHO CHIKAKOKI

The boring rod is a hollow steel tube that transmits the rotation and feed pressure of the boring machine to the bit at the end and conducts the boring water, which is essential for boring, to the bit.

Low head type DW type

This boring machine is designed with a low swivel head height and is equipped with a hydraulic chuck as standard equipment, enabling safe and speedy rod loading and unloading operations. The small models are effe...

Top drive type K type

Equipped with a drill head for double-tube drilling with an inner tube rod and outer tube casing, and with a unique inner tube slide mechanism unique to the K-type, this machine is effective in drilling collapsib...

Spindle type DU type

This medium to large size model has 6 forward and 2 reverse spindle speeds by switching between high and low gears. It excels in deep drilling such as deep well drilling, hot spring drilling, and exploratory surv...

Spindle type D type

This is a compact and lightweight model. It is easy to disassemble, transport, and reassemble, and is used for all types of boring work, including survey boring, injection work, and small wells, even in small wor...

Spindle type DH type

Medium to large size models. Equipped with ample supply pressure, balancing force, and torque, they are used for foundation piles, landslide control piles, and well boring. A hydraulic chuck is standard equipment...

Air Tools

• Manufacturer: TOHO CHIKAKOKI

The air hammer, which uses compressed air sent from a high-pressure compressor through a boring rod to apply impact force to the tip bit to crush and drill through rock, the expanding bit for double pipe drilling...

Rope-type safety device

• Manufacturer: TOHO CHIKAKOKI

This device is designed to prevent accidents caused by contact with rotating parts (spindles, boring heads, etc.) during boring operations.

Core tubes

• Manufacturer: TOHO CHIKAKOKI

This tubular tool houses the core cut out by the core bit. Various couplings are available for connection to the boring rod.

HANTA TH-M1

• Manufacturer: Hanta

Gas cylinders and trowels are sold separately. Page Top

Wire-cut electrical discharge machine with new type cover

Wire Cut Electrical Discharge Machine Wire Cut Electric Discharge Machine Machine • Our Striking Initial cost. • Ability to process thick materials 200mm-400mm. • Outstanding Running cost and Performance. • The w...

NeoV-MⅡColumn-type 5-face machining center

Double-Column 5-Side Machining Center Combines High Rigidity and Stable Accuracy to Support High Productivity The "NeoV-M" series, developed as a double-column 5-face machining center that achieves high-speed, hi...

FMA3-V/FMA3H-V

Space-saving with our original high-performance machining center, Realization of automatic operation system Highly rigid structure with short force transmission distance Stable machining with less thermal displac...

FMA3-Ⅲ

Space saving by original vertical pallet magazine Long-hour automatic operation is possible Highly rigid structure with short force transmission distance Stable machining with less thermal displacement by adoptin...