New Machine Tools in Mexico

BOLT CUTTERS - ¼" - ¾" - FOR MAKING STRIPED SOCKETS

• Manufacturer: amxmachinery.com

PART: 2TA-DC78 - BOLT CUTTERS - ¼" - ¾" - FOR MAKING STRIPED SOCKETS NEW WITH WARRANTY MINIMUM FEED SIZE: 8-3/4" LONG AUTOMATIC AND ROTARY FEED MAKES SMALL ANGLE AT EACH END OF PINS FOR EASE OF USE ADJUSTABLE BOL...

SL-DC-WP0015 - 15" WIDE BRUSH - DOWN MOTOR 3 HP, 2 or 3 PHASES

• Manufacturer: amxmachinery.com

PART: 1SL-DC-WP0015 - 15" WIDE BRUSH - DOWN MOTOR 3 HP, 2 or 3 PHASES NEW WITH WARRANTY MOTOR: 3 HP, 220V, 60 Hz, 1 or 3 PHASES MOTOR BELOW FEEDING SPEED: 16 AND 30 FT/MIN DIMENSIONS: TABLE WITH ROLLER EXTENSION:...

CASE LINKER

• Manufacturer: amxmachinery.com

PART # 2JM-001 - DRAWER OR BOX LINKER - 9-5/8" LONG CAPACITY PART # 2JM-002 - CRATE OR BOX LINER - CAPACITY 12" LONG For packing boxes, bee houses, etc. New with warranty Motor 3 HP, 220V, 2 phase, 60 Hz Head wit...

SL-DC-MSH16-1 - VERTICAL BENCH CHISEL

• Manufacturer: amxmachinery.com

VERTICAL BENCH CHISEL MOTOR 1/2 HP, 110V, 60 Hz, 1 PHASE (220V OPTIONAL) CUTTER CAPACITY: 1/4" - 5/8" - HEAD TRAVEL: 4-3/4" - MAX. HEIGHT OF WOOD HEAD OFFSET: 4-3/4" - MAX. WOOD HEIGHT BIT CAPACITY: 1/8" - 1/2" -...

V-NAILS

• Manufacturer: amxmachinery.com

V-NAILS V-NAILS ASSEMBLE THE BEST CORNERS IN THE INDUSTRY, VARIOUS ASPECTS OF THE BODY AND WINGS OF THE V-NAILS HAVE BEEN REDESIGNED TO APPLY MAXIMUM PRESSURE WHEN THE FRAME IS ASSEMBLED. THE TIGHTENING ACTION OF...

NAILER FOR PALLETS

• Manufacturer: Silverline

PART # SIL-DC-AT3092 - PNEUMATIC NAILER FOR PALLETS NEW WITH WARRANTY NAIL LENGTH: 1-3/4" TO 2-3/4 90-110 PSI, 6-8 CFM, 168-220 LTS/MIN

SL-DC-WS75 - SPINNING TOP - 3/4 HP MOTOR - WITH 1/2" AND 3/4" SHAFTS

• Manufacturer: amxmachinery.com

PART: 1SL-DC-WS75 - SPINNING TOP - 3/4 HP MOTOR - WITH 1/2" AND 3/4" SHAFTS NEW WITH WARRANTY MOTOR: 3/4 HP, 110/220V, 60Hz, 1 or 2 PHASES SHAFTS DIAMETERS: 1/2" AND 3/4 PACKING 1 BOX - 90 KG - 50X65X60 CMS

STANDARD FILTERS

• Manufacturer: amxmachinery.com

Standard and High Efficiency filters are designed to capture any wet solids or liquid particles in an airstream such as glues, oils, stains, lacquers, fiberglass, epoxies, sealants, teflon, etc. The filters meet ...

Binks 83-5301

• Manufacturer: Binks

PART: AMX-10084 - PAINT POT - 10 GALLON CAPACITY - BINKS 83-5301 USED - GOOD CONDITION 2 POTS IN STOCK Made of Galvanized Steel Tank measures: 14" diameter x 22" high Overall Dimensions: 16" diameter x 28" high 1...

AUTOMATIC SPINNING TOP - WITH FEEDING SYSTEM

• Manufacturer: amxmachinery.com

Range of cutter diameter 1" to 6" (changeable) Table diameter 18" Table speed 1.5 ~ 4.0 RPM (4 speeds) Spindle diameter 30 mm Spindle speed 9000 RPM Cutter size 100 mm Spindle height 4" Follower roller diameter 1...

FLOOR JACK 3 TONS

• Manufacturer: amxmachinery.com

PART: 1SL-DC-FJ3T - FLOOR JACK - 3 TONS CAPACITY 3 TONS

MOTOR TRIPOD 1250 LBS

• Manufacturer: amxmachinery.com

PART # SIL-DC-ES1250 - TRIPOD FOR LOADING MOTORS UP TO 1250 LBS.

CORNER CUTTER

• Manufacturer: amxmachinery.com

PART: 2AC-CM60 - CORNER CUTTER - FOR METAL AND PLASTICS Cutter is designed to cut flexible plastics up to .350" and aluminum up to .063" and other intermediate weight materials. Size: 10" L x 6.5" W x 9" H, Weigh...

KILN FOR CERAMICS, GLASS, METALS - 93 LITERS

• Manufacturer: amxmachinery.com

KILN FOR CERAMICS, GLASS, METALS - 93 LITERS NEW WITH WARRANTY The digital automatic TnF-82 kiln is large enough for most ceramic projects. Figured at cost per cubic foot, it is among our lowest priced hobby kiln...

MOULDER HEADS - LENGTH 6" - 1-13/16" SHAFT - 2-1/8" SHAFT

PART: 12305 - MOULDER HEADS - LENGTH 6" - SHAFT 1-13/16" - SHAFT 2-1/8" - SHAFT 2-1/8" - SHAFT 2-1/8 2-1/8" SHAFT WITHOUT 2-1/8" SHAFT BUSHING USED - VERY GOOD CONDITION North American Gladu hydro-lock 6 wings 20...