Building Filters
SAREMA SPRAY GLUING BENCH
used
- Manufacturer: Sarema
SAREMA spray gluing bench. Fully functional, in good condition.
Santa Croce sull'Arno, ItalyAPPLY REINFORCEMENTS REFI
used
- Manufacturer: VIMAC
Applies REFI reinforcements. In good, working condition.
Santa Croce sull'Arno, ItalyANGELERI LATEX GLUER
used
- Manufacturer: ANGELERI
ANGELERI latex gluing machine. 40 cm roller. In good, working condition.
Santa Croce sull'Arno, Italy2 PLACE GRINDER
used
- Manufacturer: VIMAC
2 place grinder. In good condition, working at the time of collection.
Santa Croce sull'Arno, Italy
E300 Oiler Appliance
new
- Manufacturer: Dell’Orco & Villani
Stainless steel device for the preparation of oily emulsions, it consists of two tanks of about 300 litres each equipped with electrical resistances and thermostats for heating the emulsion.
Florence, Italy
CSA Loaders and Openers
new
Overall dimensions: CSA/1100: 6070 x 1600 x 2360 (H) mm; CSA/1600: 6070 x 2100 x 2360 (H) mm; CSA/2000: 6070 x 2500 x 2360 (H) mm; CSA/2500: 6070 x 3000 x 2360 (H) mm The CSA Bale Opener is used for automatic ope...
Florence, Italy
CB Loaders and Openers
new
Overall dimensions: CB/1000x**: 2100+**x1000 (L) x 1500 (W) x 3200 (H) mm; CB/1450x**: 2100+**x1000 (L) x 1950 (W) x 3200 (H) mm; CB/1850x**: 2100+**x1000 (L) x 2350 (W) x 3200 (H) mm The CB Loader is used for te...
Florence, Italy
CAP Loaders and Openers
new
Installed power: CAP/1450: 6.84 kW; CAP/1850: 6.84 kW; CAP/2500: 7.59 kW Overall dimensions: CAP/1450: 6320 x 1950 x 3190 (H) mm; CAP/1850: 6320 x 2350 x 3190 (H) mm; CAP/2500: 6320 x 3000 x 3190 (H) mm The CAP b...
Florence, Italy
Capacitor
new
- Manufacturer: Dell’Orco & Villani
The BM Beater is built on thick sidewalls in working length 2500 mm. The 860 mm-diameter reel is constructed of iron tube with 35 mm-diameter drawn steel tips. The machine is equipped with a perforated sheet meta...
Florence, Italy
CAB Loaders and Openers
new
Installed power: CAB/1450: 5.92 kW; CAB/1850: 5.92 kW; CAB/2500: 6.67 kW Overall dimensions: CAB/1450: 6520 x 1950 x 3190 (H) mm; CAB/1850: 6520 x 2350 x 3190 (H) mm; CAB/2500: 6520 x 3000 x 3190 (H) mm The CAB b...
Florence, Italy
CNB Loaders and Openers
new
Overall dimensions: CNB/1000x**: 1900+**x1000 (W) x 1500 (W) x 3200 (H) mm; CNB/1450x**: 1900+**x1000 (W) x 1950 (W) x 3200 (H) mm; CNB/1850x**: 1900+**x1000 (W) x 2350 (W) x 3200 (H) mm The CNB Loader is used fo...
Florence, Italy
CS Loaders and Openers
new
Overall dimensions: CS/1000: 3700 x 1450 x 2360 (H) mm; CS/1450: 3700 x 1950 x 2360 (H) mm; CS/1850: 3700 x 2350 x 2360 (H) mm The CS loader is used for the automatic feeding of fraying machines and openers. The ...
Florence, Italy
ALR Wolf Opener
new
- Manufacturer: Dell’Orco & Villani
Installed power: AL/1000/R: 20 kW; AL/1500/R: 23.5 kW Overall dimensions: AL/1000/R: 3400 x 1620 x 1380 (H) mm; AL/1500/R: 3400 x 2120 x 1380 (H) mm The ALR wolf opener is mainly used in mixing plants for pre-ope...
Florence, Italy
BF Single Room
new
- Manufacturer: Dell’Orco & Villani
Installed power: BF/2500-3000: 5.2 kW; BF/3500-4000: 6.6 kW Overall dimensions: BF/2500-3000x**: 2900-3400 (L) x 1750+**x1000 (W) x 4100 (H) mm; BF/3500-4000x**: 3900-4400 (L) x 1750+**x1000 (W) x 4100 (H) mm The...
Florence, ItalyTRC Cyclone Scartaferri
new
- Manufacturer: Dell’Orco & Villani
The iron-rejector cyclone is a device applicable in pneumatic conveyors for the separation of heavy bodies present in the fibres and for the rejection of impurities that differ in specific weight from the fibre. ...
Florence, Italy