Used robotics

2006 Horizontal Injection Mold 80901
EQUIPPED WITH: - 2 Sets of moving platen glide shoes to support stack mold center support - 2C Injection unit (2 colors/2 component equip.) - 2C Injection unit 460 placed at an angle of 35 degrees behind fixed pl...
Troy, MI
2005 Engel 600 ton Two-shot, Two-Color Injection Molding Machine
- Manufacturer: Engel
Machine model 2550H/330L/610. Primary injection shot size is 38.72 oz, 2nd barrel is 5oz. 914x861mm tiebars, 850mm clamp stroke, multiple core pull, rotary table available, Yushin custom side entry robot.
United States
Trusted Seller
1997 NEGRI BOSSI NB150 (1500H-600)
- Manufacturer: Negri Bossi
Tonnage: 85 | Pump type: Variable | Pump notes: 1 variable flow pump | Screw diameter mm (a): 45 | Theoretical vol. (a): 353 | Mould thickness mm: 170(min) x 525(max) | Travel of the moving plane mm: 460 | Colum...
Trusted Seller
2015 501 Ton Nissei FNX460III-160A
- Manufacturer: Nissei
2015 501 Ton Nissei FNX460III-160A Hybrid Injection Molding machines Shot size: 54 oz Screw diameter: 80 mm Tie bar spacing: 32.3” x 32.3” Platen size: 46.9” x 46.9” Max. Open daylight: 55.1” Control: Tact...
United States
Trusted Seller
1996 NEGRI BOSSI NB 80
- Manufacturer: Negri Bossi
Tonnage: 80 | Pump type: Variable | Pump notes: 1 variable pump | Screw diameter mm (a): 35 | Theoretical vol. (a): 170 | Mould thickness mm: 120(min) x 400(max) | Travel of the moving plane mm: 230 | Column pas...
2005 UBE 720 all-electric with newer Star all-servo
- Manufacturer: UBE Industries
- Model: UN720W114E
UBE ULTIMA UN720W/114E Tie bar 1100 x 1100 Shot size 2634 grams. Length 452.03” T-slot auto clamps Hyd core 1 stationary, 1 moving. Hyd power unit Hyd VG 4 with LS. Robot LW-1600 VIH-480 Controller Stec...
United States
2020 Milacron Fanuc Alpha S500IA 890G Roboshot
- Manufacturer: Milacron
Milacron Fanuc Injection Molding MachineRoboshot Alpha S500IA 890G Injection Molding Machine 1, Robot For Finished Product Removal (separate from Machine) g PS Shot Size 944 Tie Bar Spacing 920x920mm Clamp St...
$300,000 USD
Get financing
Est. $5,646/mo
Delta, CO
Trusted Seller
2014 1150 Ton Hyundai EDIS-1150DL Two Platen Injection molding machine
- Manufacturer: Hyundai
- Model: EDIS
***7 Machines available*** New in 2014 1150 Ton Hyundai EDIS-1150DL Two Platen Injection molding machine Shot size: 184.55 Oz Screw size: 110 mm Tie bar spacing: 54.72" x 46.85" Platen Size: 74.80" x 66.93" ...
United States
2005 SUMITOMO SE30DU
- Manufacturer: Sumitomo
- Model: SE30DU
20mm Screw 4" Locating Ring 12.2" x 11.42" Tie Bar Spacing 5.91" Min Die Height 11.81" Max Die Height 9.06" Clamp Stroke 20.87" Max Daylight .8 oz Shot Yushin Robot Included
$18,500 USD
Get financing
Est. $363/mo
United States
Trusted Seller
1999 VAN DORN 500HT
- Manufacturer: Van Dorn Demag
- Model: 500HT
Van Dorn 500ht 500 Ton Injection Molding Machine Machine was fully operational when taken offline, material loader and robot included. Capacity 500 Ton Shot Size 89.6 oz Tie Bar Spacing 32.5" x 32.5" Platen Size ...
United States
Trusted Seller
2021 309 Ton Nissei FNX280III-71A
- Manufacturer: Nissei
***3 machines available*** 2021 309 Ton Nissei FNX280III-71A: Hybrid Injection Molding machines Shot size: 18.6 oz Screw diameter: 56 mm Tie bar spacing: 26” x 26” Platen size: 37.6” x 37.6” Max. daylight ...
United States
Trusted Seller
2022 720 Ton Nissei FVX660III-310L
- Manufacturer: Nissei
(2 units available) 2022 720 Ton Nissei FVX660III-310L Hybrid Injection Molding machines Shot size: 132 oz Screw diameter: 100 mm Tie bar spacing: 43.3" x 43.3" Platen Size: 60.6" x 60.6" Max. Open dayligh...
United States
Trusted Seller
1997 750 Ton ENGEL ES 1000/750WP Injection Molding Machine
- Manufacturer: Engel
- Model: ES 750
1997 750 Ton ENGEL ES 1000/750WP Injection Molding Machine Shot size: 259 Oz Screw diameter: 140 mm Tie bar spacing: 45" x 45" Platen Size: 66.73" x 64.30" Max. Open daylight: 75.59" Control: CC100 Hours: ...
United States
2008 Toshiba 240 ton all-electric model EC240NIIV30-6
- Manufacturer: Toshiba
- Model: EC240
TOSHIBA MODEL EC240NIIV30-6 ELECTRIC INJECTION MOLDING MACHINE 2008 240 TON 11 OZ, 45 MM SCREW SIZE 34.25" X 32.25" PLATEN SIZE 23.75" X 22" BETWEEN TIEBARS 42.91" DAYLIGHT 5.12" EJECTOR STROKE 14.2" MIN M...
United States
Trusted Seller
2016 Haitian JU7500II/5000
- Manufacturer: Haitian
Haitian JU7500II/5000 (YOM 2016) Used Two-Platen Plastic Injection Moulding Machine with Yushin Robot For Sale Remarks: Asset Info: - 4 X core pull - 2 on moving platen, 2 on fixed platen - 3 X air blast valves –...
Asia Pacific