- Trusted Seller
10" Colinear Machine Pelletizer, Model PF-1008
used
- Manufacturer: Colinear Machine
10" Colinear Machine Pelletizer, Model PF-1008 Used 10" Colinear machine pelletizer, model PF-1008, 10" wide, 2 blade rotor, on stand with 0.75 hp, 90 volt dc motor with scr controller, 1725 rpm motor, serial# CM...
Cleveland, OH - Trusted Seller
Allis Chalmers V5D-60NR-6THY
used
- Manufacturer: Allis-Chalmers
Used Allis Chalmers semi conductor power converter units for 60 HP DC motors. Made by Allis Chalmers in Milwaukee, WI. Name-Statiflex III variable speed drive pelletizer. Type V5D-60NR-6THY. S/N 02-3034- 70451. I...
Hainesport, NJ 
NELMOR G1215P1 GRANULATOR WITH FEED 16280
used
- Manufacturer: Nelmor
Nelmor model G1215P1 granulator. S/N 99K03325. 12″ x 15″ feed throat, 3 knife open rotor, 2 bed knife 15HP 208-230/460V 1,480 RPM motor. Double wall rear top hand feed with front mounted knurled steel feed rolls,...
Elk Grove Village, IL- Trusted Seller
Cumberland 62B Granulator Feed Chute
used
- Manufacturer: Cumberland
Cumberland 62B Granulator Feed Chute Used model 62B Cumberland dual feed hopper with rear mounted 48" wide paddle infeed, paddles powered by 3 hp dc motor drive with magnetic top infeed chute.
New Jersey, USA - Trusted Seller
Cumberland 62B Granulator Feed Chute
used
- Manufacturer: Cumberland
Cumberland 62B Granulator Feed Chute Used model 62B Cumberland dual feed hopper with rear mounted 48" wide paddle infeed, paddles powered by 3 hp dc motor drive with magnetic top infeed chute.
New Jersey, USA 
5 gallon Lee DMT5-HOM Jacketed Tank w/ Mixer
used
One used Lee Model DMT5-HOM 5 gallon kettle, stainless steel construction, 14" Diameter x 10" Deep, hemispherical bottom, jacketed for PSI@ F, Bridge mounted Eppenbach Triple motion Agitator with double motion ag...
Cleveland, OH
CUMBERLAND 6″ PELLETIZER 17387
used
- Manufacturer: Cumberland
Cumberland Utilizer 6″ strand pelletizer. Machine has a 36 knife helical style rotor and a 5HP 180-Volt DC motor with silicon controlled rectifier control. Mounted on casters, S/N 30500-88004. Manufactured 1988. ...
Elk Grove Village, IL- Trusted Seller
KILLION 2" Wide
used
- Manufacturer: KILLION
Used 2" Wide Killion Strand Pelletizer with 20 Knife Carbide Tip Rotor Manufacturer: Killion Pneumatically actuated top roll feed, Rotor and pull rolls driven by 1 hp DC motor through a gearbox with Bronco II con...
Hainesport, NJ - Trusted Seller
Cumberland 37"
used
- Manufacturer: Cumberland
- Model: 37
Used Cumberland pull roll hopper with 6" diameter x 37" wide Knurald and grooved all set position feed roll infeed with pneumatic pinch. Feed roll in feed trumpet, feed rolls are chain and sprocket driven by 7.5 ...
Hainesport, NJ 
NELMOR G1436MB GRANULATOR WITH FEED 14098
used
- Manufacturer: Nelmor
Nelmor model G1436MB granulator. S/N 8907-28788. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 75HP 230/460V motor. Forklift base, insulated body panels and feed roll in-feed hopper with 8″ x 13″ side ...
Elk Grove Village, IL- Trusted Seller
REBUILT BALL & JEWELL LT-1248 GRANULATOR WITH FEED ROLLS
refurbished
- Manufacturer: Ball & Jewell
- Model: LT-1248
STOCK #110105 REBUILT BALL & JEWEL GRANULATOR WITH FEED ROLLS IN FEED: 7.5" X 47.25" FRONT SHEET WITH TOP FEED RUBBER PULL ROLLS 180V DC MOTOR WITH DRIVE UINT CUTTING CHAMBER 12" X 48" THREE KNIFE OPEN ROTOR...
Illinois, USA 
CUMBERLAND 284 GRANULATOR WITH FEED 12939
used
- Manufacturer: Cumberland
Cumberland model 284 granulator, S/N 325525-83061, 10″ x 12″ feed throat, 3 knife open rotor, 2 bed knife, approximate 2.75″ diameter x 8″ wide grooved knurled & interlocked steel feed rolls. Pneumatic pinched in...
Elk Grove Village, IL
WORTEX 755HS UNDER THE PRESS 10711
used
- Manufacturer: Wortex
Wortex model 755HS granulator, S/N 3200. 5″ x 55″ feed throat, 4 knife staggered solid rotor, 2 bed knives, 30HP 230/460V motor 1HP 1,740 RPM DC motor for steel feed rolls. Feed roll feed opening is 3″ x 54″ and ...
Elk Grove Village, IL
NELMOR G1012M1 GRANULATOR WITH FEED 5602
used
- Manufacturer: Nelmor
Nelmor model G1012M1 granulator. S/N 7908-13725. 10″ x 12″ feed throat. 3 knife open rotor, 2 bed knife. 10HP 230/460V motor. 3/4HP side mounted blower discharge with 4″ OD outlet. 9″ wide front mounted knurled s...
Elk Grove Village, IL
SPROUT 9 X 11 GRANULATOR 12690
used
Sprout 9″ x 11″ feed roll granulator, no S/N. 9″ x 11.5″ feed throat, 3 knife open rotor, 1 bed knife cutting chamber, 20HP 230/460V motor. Side feed tray feed hopper with front mounted 3″ x 9″ steel knurled feed...
Elk Grove Village, IL
Tip: Enter manufacturer, model or keyword